[PATCH] HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL

[PATCH] HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL

[Stuart Hayhurst]

The Logitech G502 Hero Wireless's high resolution scrolling resets after
being unplugged without notifying the driver, causing extremely slow
scrolling.

The only indication of this is a battery update packet, so add a quirk to
detect when the device is unplugged and re-enable the scrolling.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
---

I assume this affects more than just my mouse, but I don't have the hardware
to find out which other mice need this too.

---
 drivers/hid/hid-logitech-hidpp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index aaef405a717e..5e763de4b94f 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -75,6 +75,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
 #define HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS	BIT(27)
 #define HIDPP_QUIRK_HI_RES_SCROLL_1P0		BIT(28)
 #define HIDPP_QUIRK_WIRELESS_STATUS		BIT(29)
+#define HIDPP_QUIRK_RESET_HI_RES_SCROLL		BIT(30)
 
 /* These are just aliases for now */
 #define HIDPP_QUIRK_KBD_SCROLL_WHEEL HIDPP_QUIRK_HIDPP_WHEELS
@@ -193,6 +194,7 @@ struct hidpp_device {
 	void *private_data;
 
 	struct work_struct work;
+	struct work_struct reset_hi_res_work;
 	struct kfifo delayed_work_fifo;
 	struct input_dev *delayed_input;
 
@@ -3836,6 +3838,7 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 	struct hidpp_report *answer = hidpp->send_receive_buf;
 	struct hidpp_report *report = (struct hidpp_report *)data;
 	int ret;
+	int last_online;
 
 	/*
 	 * If the mutex is locked then we have a pending answer from a
@@ -3877,6 +3880,7 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 			"See: https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup/\n");
 	}
 
+	last_online = hidpp->battery.online;
 	if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_BATTERY) {
 		ret = hidpp20_battery_event_1000(hidpp, data, size);
 		if (ret != 0)
@@ -3901,6 +3905,11 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 			return ret;
 	}
 
+	if (hidpp->quirks & HIDPP_QUIRK_RESET_HI_RES_SCROLL) {
+		if (last_online == 0 && hidpp->battery.online == 1)
+			schedule_work(&hidpp->reset_hi_res_work);
+	}
+
 	if (hidpp->quirks & HIDPP_QUIRK_HIDPP_WHEELS) {
 		ret = hidpp10_wheel_raw_event(hidpp, data, size);
 		if (ret != 0)
@@ -4274,6 +4283,13 @@ static void hidpp_connect_event(struct work_struct *work)
 	hidpp->delayed_input = input;
 }
 
+static void hidpp_reset_hi_res_handler(struct work_struct *work)
+{
+	struct hidpp_device *hidpp = container_of(work, struct hidpp_device, reset_hi_res_work);
+
+	hi_res_scroll_enable(hidpp);
+}
+
 static DEVICE_ATTR(builtin_power_supply, 0000, NULL, NULL);
 
 static struct attribute *sysfs_attrs[] = {
@@ -4404,6 +4420,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	}
 
 	INIT_WORK(&hidpp->work, hidpp_connect_event);
+	INIT_WORK(&hidpp->reset_hi_res_work, hidpp_reset_hi_res_handler);
 	mutex_init(&hidpp->send_mutex);
 	init_waitqueue_head(&hidpp->wait);
 
@@ -4499,6 +4516,7 @@ static void hidpp_remove(struct hid_device *hdev)
 
 	hid_hw_stop(hdev);
 	cancel_work_sync(&hidpp->work);
+	cancel_work_sync(&hidpp->reset_hi_res_work);
 	mutex_destroy(&hidpp->send_mutex);
 }
 
@@ -4546,6 +4564,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* Keyboard MX5500 (Bluetooth-receiver in HID proxy mode) */
 	  LDJ_DEVICE(0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Logitech G502 Lightspeed Wireless Gaming Mouse */
+	  LDJ_DEVICE(0x407f),
+	  .driver_data = HIDPP_QUIRK_RESET_HI_RES_SCROLL },
 
 	{ LDJ_DEVICE(HID_ANY_ID) },
 
-- 
2.51.0

Re: [PATCH] HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL

[Jiri Kosina]

On Mon, 6 Oct 2025, Stuart Hayhurst wrote:

> The Logitech G502 Hero Wireless's high resolution scrolling resets after
> being unplugged without notifying the driver, causing extremely slow
> scrolling.
> 
> The only indication of this is a battery update packet, so add a quirk to
> detect when the device is unplugged and re-enable the scrolling.
> 
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037
> Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
> ---
> 
> I assume this affects more than just my mouse, but I don't have the hardware
> to find out which other mice need this too.

We will find out about more devices later for sure.

Thanks, now applied to hid.git#for-6.18/upstream-fixes.

-- 
Jiri Kosina
SUSE Labs