From: Alex Tran <alex.t.tran@gmail.com>
To: alex@digriz.org.uk
Cc: andrew@lunn.ch, sebastian.hesselbarth@gmail.com,
gregory.clement@bootlin.com, linux@armlinux.org.uk,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Alex Tran <alex.t.tran@gmail.com>
Subject: [PATCH v1] arm: mach-orion5x: ts78xx: simplify support configuration with table
Date: Sun, 12 Oct 2025 16:51:47 -0700 [thread overview]
Message-ID: <20251012235147.325532-1-alex.t.tran@gmail.com> (raw)
Replace switch statement based configuration with a lookup table approach.
The table is iterated through matching the correct configuration instead of
setting the configuration on a case by case basis.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
---
arch/arm/mach-orion5x/ts78xx-fpga.h | 7 ++++
arch/arm/mach-orion5x/ts78xx-setup.c | 60 +++++++++++++++-------------
2 files changed, 40 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 2f4fe3ca5c1a..e35c63382b4c 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -40,3 +40,10 @@ struct ts78xx_fpga_data {
struct fpga_devices supports;
};
+
+struct ts78xx_fpga_support_config {
+ u32 id;
+ bool rtc_present;
+ bool nand_present;
+ bool rng_present;
+};
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index af810e7ccd79..cd8e15cf6a13 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -325,6 +325,18 @@ static void ts78xx_ts_rng_unload(void)
/*****************************************************************************
* FPGA 'hotplug' support code
****************************************************************************/
+static const struct ts78xx_fpga_support_config ts78xx_fpga_support_table[] = {
+ { TS7800_REV_1, 1, 1, 1 },
+ { TS7800_REV_2, 1, 1, 1 },
+ { TS7800_REV_3, 1, 1, 1 },
+ { TS7800_REV_4, 1, 1, 1 },
+ { TS7800_REV_5, 1, 1, 1 },
+ { TS7800_REV_6, 1, 1, 1 },
+ { TS7800_REV_7, 1, 1, 1 },
+ { TS7800_REV_8, 1, 1, 1 },
+ { TS7800_REV_9, 1, 1, 1 },
+};
+
static void ts78xx_fpga_devices_zero_init(void)
{
ts78xx_fpga.supports.ts_rtc.init = 0;
@@ -334,36 +346,30 @@ static void ts78xx_fpga_devices_zero_init(void)
static void ts78xx_fpga_supports(void)
{
- /* TODO: put this 'table' into ts78xx-fpga.h */
- switch (ts78xx_fpga.id) {
- case TS7800_REV_1:
- case TS7800_REV_2:
- case TS7800_REV_3:
- case TS7800_REV_4:
- case TS7800_REV_5:
- case TS7800_REV_6:
- case TS7800_REV_7:
- case TS7800_REV_8:
- case TS7800_REV_9:
+ const struct ts78xx_fpga_support_config *cfg = NULL;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ts78xx_fpga_support_table); i++) {
+ if (ts78xx_fpga_support_table[i].id == ts78xx_fpga.id) {
+ cfg = &ts78xx_fpga_support_table[i];
+ break;
+ }
+ }
+
+ if (cfg) {
+ ts78xx_fpga.supports.ts_rtc.present = cfg->rtc_present;
+ ts78xx_fpga.supports.ts_nand.present = cfg->nand_present;
+ ts78xx_fpga.supports.ts_rng.present = cfg->rng_present;
+ } else if (((ts78xx_fpga.id >> 8) & 0xffffff) == TS7800_FPGA_MAGIC) {
+ pr_warn("unrecognised FPGA revision 0x%.2x\n",
+ ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
ts78xx_fpga.supports.ts_rng.present = 1;
- break;
- default:
- /* enable devices if magic matches */
- switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
- case TS7800_FPGA_MAGIC:
- pr_warn("unrecognised FPGA revision 0x%.2x\n",
- ts78xx_fpga.id & 0xff);
- ts78xx_fpga.supports.ts_rtc.present = 1;
- ts78xx_fpga.supports.ts_nand.present = 1;
- ts78xx_fpga.supports.ts_rng.present = 1;
- break;
- default:
- ts78xx_fpga.supports.ts_rtc.present = 0;
- ts78xx_fpga.supports.ts_nand.present = 0;
- ts78xx_fpga.supports.ts_rng.present = 0;
- }
+ } else {
+ ts78xx_fpga.supports.ts_rtc.present = 0;
+ ts78xx_fpga.supports.ts_nand.present = 0;
+ ts78xx_fpga.supports.ts_rng.present = 0;
}
}
--
2.51.0
next reply other threads:[~2025-10-12 23:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-12 23:51 Alex Tran [this message]
2025-10-13 12:14 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251012235147.325532-1-alex.t.tran@gmail.com \
--to=alex.t.tran@gmail.com \
--cc=alex@digriz.org.uk \
--cc=andrew@lunn.ch \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®