[PATCH v4 0/2] Add Google Tensor SoC USB PHY support

[Roy Luo <royluo@google.com>]

This series introduces USB PHY support for the Google Tensor G5
SoC (codename: Laguna), a new generation of Google silicon first
launched with Pixel 10 devices.

The Tensor G5 represents a significant architectural overhaul compared
to previous Tensor generations (e.g., gs101), which were based on Samsung
Exynos IP. Although the G5 still utilizes Synopsys IP for the USB
components, the custom top-level integration introduces a completely new
design for clock, reset scheme, register interfaces and programming
sequence, necessitating new drivers and device tree bindings.

The USB subsystem on Tensor G5 integrates a Synopsys DWC3 USB 3.1
DRD-Single Port controller with hibernation support, and a custom PHY
block comprising Synopsys eUSB2 and USB 3.2/DP combo PHYs. The controller
support is sent as a separate patch series.

Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Roy Luo <royluo@google.com>
---
Changes in v4:
- Separate controller and phy changes into two distinct patch series.
- Remove usb2only mode configuration and the corresponding usb_top_cfg
  reg (moved to controller)
- Add more descriptions to dp_top reg to indicate it's not DP specific.
- Add u2phy_apb clk/reset
Link to v3: https://lore.kernel.org/linux-usb/20251010201607.1190967-1-royluo@google.com

Changes in v3:
- Align binding file name with the compatible string
- Simplify the compatible property in binding to a single const value.
- Add descriptive comments and use item list in binding.
- Rename binding entries for clarity and brevity.
Link to v2: https://lore.kernel.org/linux-usb/20251008060000.3136021-1-royluo@google.com

Changes in v2:
- Reorder patches to present bindings first.
- Update dt binding compatible strings to be SoC-specific (google,gs5-*).
- Better describe the hardware in dt binding commit messages and
  descriptions.
- Adjust PHY driver commit subjects to use correct prefixes ("phy:").
- Move PHY driver from a subdirectory to drivers/phy/.
Link to v1: https://lore.kernel.org/linux-usb/20251006232125.1833979-1-royluo@google.com/
---
Roy Luo (2):
  dt-bindings: phy: google: Add Google Tensor G5 USB PHY
  phy: Add Google Tensor SoC USB PHY driver

 .../bindings/phy/google,gs5-usb-phy.yaml      | 104 +++++++
 drivers/phy/Kconfig                           |  13 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/phy-google-usb.c                  | 271 ++++++++++++++++++
 4 files changed, 389 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/google,gs5-usb-phy.yaml
 create mode 100644 drivers/phy/phy-google-usb.c


base-commit: e5f0a698b34ed76002dc5cff3804a61c80233a7a
-- 
2.51.0.858.gf9c4a03a3a-goog