From: <linan122@huawei.com>
To: <corbet@lwn.net>, <song@kernel.org>, <yukuai@fnnas.com>,
<linan122@huawei.com>, <hare@suse.de>, <xni@redhat.com>
Cc: <linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-raid@vger.kernel.org>, <linan666@huaweicloud.com>,
<yangerkun@huawei.com>, <yi.zhang@huawei.com>
Subject: [PATCH v7 2/4] md: init bioset in mddev_init
Date: Mon, 27 Oct 2025 15:29:13 +0800 [thread overview]
Message-ID: <20251027072915.3014463-3-linan122@huawei.com> (raw)
In-Reply-To: <20251027072915.3014463-1-linan122@huawei.com>
From: Li Nan <linan122@huawei.com>
IO operations may be needed before md_run(), such as updating metadata
after writing sysfs. Without bioset, this triggers a NULL pointer
dereference as below:
BUG: kernel NULL pointer dereference, address: 0000000000000020
Call Trace:
md_update_sb+0x658/0xe00
new_level_store+0xc5/0x120
md_attr_store+0xc9/0x1e0
sysfs_kf_write+0x6f/0xa0
kernfs_fop_write_iter+0x141/0x2a0
vfs_write+0x1fc/0x5a0
ksys_write+0x79/0x180
__x64_sys_write+0x1d/0x30
x64_sys_call+0x2818/0x2880
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Reproducer
```
mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd]
echo inactive > /sys/block/md0/md/array_state
echo 10 > /sys/block/md0/md/new_level
```
Fixes: d981ed841930 ("md: Add new_level sysfs interface")
Signed-off-by: Li Nan <linan122@huawei.com>
---
drivers/md/md.c | 74 +++++++++++++++++++++++++------------------------
1 file changed, 38 insertions(+), 36 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index f6fd55a1637b..51f0201e4906 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -730,6 +730,8 @@ static void mddev_clear_bitmap_ops(struct mddev *mddev)
int mddev_init(struct mddev *mddev)
{
+ int err = 0;
+
if (!IS_ENABLED(CONFIG_MD_BITMAP))
mddev->bitmap_id = ID_BITMAP_NONE;
else
@@ -741,8 +743,26 @@ int mddev_init(struct mddev *mddev)
if (percpu_ref_init(&mddev->writes_pending, no_op,
PERCPU_REF_ALLOW_REINIT, GFP_KERNEL)) {
- percpu_ref_exit(&mddev->active_io);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto exit_acitve_io;
+ }
+
+ if (!bioset_initialized(&mddev->bio_set)) {
+ err = bioset_init(&mddev->bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
+ if (err)
+ goto exit_writes_pending;
+ }
+ if (!bioset_initialized(&mddev->sync_set)) {
+ err = bioset_init(&mddev->sync_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
+ if (err)
+ goto exit_bio_set;
+ }
+
+ if (!bioset_initialized(&mddev->io_clone_set)) {
+ err = bioset_init(&mddev->io_clone_set, BIO_POOL_SIZE,
+ offsetof(struct md_io_clone, bio_clone), 0);
+ if (err)
+ goto exit_sync_set;
}
/* We want to start with the refcount at zero */
@@ -773,11 +793,24 @@ int mddev_init(struct mddev *mddev)
INIT_WORK(&mddev->del_work, mddev_delayed_delete);
return 0;
+
+exit_sync_set:
+ bioset_exit(&mddev->sync_set);
+exit_bio_set:
+ bioset_exit(&mddev->bio_set);
+exit_writes_pending:
+ percpu_ref_exit(&mddev->writes_pending);
+exit_acitve_io:
+ percpu_ref_exit(&mddev->active_io);
+ return err;
}
EXPORT_SYMBOL_GPL(mddev_init);
void mddev_destroy(struct mddev *mddev)
{
+ bioset_exit(&mddev->bio_set);
+ bioset_exit(&mddev->sync_set);
+ bioset_exit(&mddev->io_clone_set);
percpu_ref_exit(&mddev->active_io);
percpu_ref_exit(&mddev->writes_pending);
}
@@ -6393,29 +6426,9 @@ int md_run(struct mddev *mddev)
nowait = nowait && bdev_nowait(rdev->bdev);
}
- if (!bioset_initialized(&mddev->bio_set)) {
- err = bioset_init(&mddev->bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
- if (err)
- return err;
- }
- if (!bioset_initialized(&mddev->sync_set)) {
- err = bioset_init(&mddev->sync_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
- if (err)
- goto exit_bio_set;
- }
-
- if (!bioset_initialized(&mddev->io_clone_set)) {
- err = bioset_init(&mddev->io_clone_set, BIO_POOL_SIZE,
- offsetof(struct md_io_clone, bio_clone), 0);
- if (err)
- goto exit_sync_set;
- }
-
pers = get_pers(mddev->level, mddev->clevel);
- if (!pers) {
- err = -EINVAL;
- goto abort;
- }
+ if (!pers)
+ return -EINVAL;
if (mddev->level != pers->head.id) {
mddev->level = pers->head.id;
mddev->new_level = pers->head.id;
@@ -6426,8 +6439,7 @@ int md_run(struct mddev *mddev)
pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
put_pers(pers);
- err = -EINVAL;
- goto abort;
+ return -EINVAL;
}
if (pers->sync_request) {
@@ -6554,12 +6566,6 @@ int md_run(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
md_bitmap_destroy(mddev);
-abort:
- bioset_exit(&mddev->io_clone_set);
-exit_sync_set:
- bioset_exit(&mddev->sync_set);
-exit_bio_set:
- bioset_exit(&mddev->bio_set);
return err;
}
EXPORT_SYMBOL_GPL(md_run);
@@ -6784,10 +6790,6 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
-
- bioset_exit(&mddev->bio_set);
- bioset_exit(&mddev->sync_set);
- bioset_exit(&mddev->io_clone_set);
}
void md_stop(struct mddev *mddev)
--
2.39.2
next prev parent reply other threads:[~2025-10-27 7:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 7:29 [PATCH v7 0/4] make logical block size configurable linan122
2025-10-27 7:29 ` [PATCH v7 1/4] md: delete md_redundancy_group when array is becoming inactive linan122
2025-10-28 11:57 ` Yu Kuai
2025-10-27 7:29 ` linan122 [this message]
2025-10-28 12:01 ` [PATCH v7 2/4] md: init bioset in mddev_init Yu Kuai
2025-10-29 2:35 ` Li Nan
2025-10-27 7:29 ` [PATCH v7 3/4] md/raid0: Move queue limit setup before r0conf initialization linan122
2025-10-28 12:12 ` Yu Kuai
2025-10-29 2:37 ` Li Nan
2025-10-27 7:29 ` [PATCH v7 4/4] md: allow configuring logical block size linan122
2025-10-28 12:23 ` Yu Kuai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251027072915.3014463-3-linan122@huawei.com \
--to=linan122@huawei.com \
--cc=corbet@lwn.net \
--cc=hare@suse.de \
--cc=linan666@huaweicloud.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=song@kernel.org \
--cc=xni@redhat.com \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
--cc=yukuai@fnnas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®