From: "Yu Kuai" <yukuai@fnnas.com>
To: <linan122@huawei.com>, <corbet@lwn.net>, <song@kernel.org>,
<hare@suse.de>, <xni@redhat.com>
Cc: <linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-raid@vger.kernel.org>, <linan666@huaweicloud.com>,
<yangerkun@huawei.com>, <yi.zhang@huawei.com>
Subject: Re: [PATCH v7 2/4] md: init bioset in mddev_init
Date: Tue, 28 Oct 2025 20:01:47 +0800 [thread overview]
Message-ID: <69829383-8212-473b-9346-d093d33f1d27@fnnas.com> (raw)
In-Reply-To: <20251027072915.3014463-3-linan122@huawei.com>
Hi,
在 2025/10/27 15:29, linan122@huawei.com 写道:
> From: Li Nan <linan122@huawei.com>
>
> IO operations may be needed before md_run(), such as updating metadata
> after writing sysfs. Without bioset, this triggers a NULL pointer
> dereference as below:
>
> BUG: kernel NULL pointer dereference, address: 0000000000000020
> Call Trace:
> md_update_sb+0x658/0xe00
> new_level_store+0xc5/0x120
> md_attr_store+0xc9/0x1e0
> sysfs_kf_write+0x6f/0xa0
> kernfs_fop_write_iter+0x141/0x2a0
> vfs_write+0x1fc/0x5a0
> ksys_write+0x79/0x180
> __x64_sys_write+0x1d/0x30
> x64_sys_call+0x2818/0x2880
> do_syscall_64+0xa9/0x580
> entry_SYSCALL_64_after_hwframe+0x4b/0x53
>
> Reproducer
> ```
> mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd]
> echo inactive > /sys/block/md0/md/array_state
> echo 10 > /sys/block/md0/md/new_level
> ```
>
> Fixes: d981ed841930 ("md: Add new_level sysfs interface")
> Signed-off-by: Li Nan <linan122@huawei.com>
> ---
> drivers/md/md.c | 74 +++++++++++++++++++++++++------------------------
> 1 file changed, 38 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index f6fd55a1637b..51f0201e4906 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -730,6 +730,8 @@ static void mddev_clear_bitmap_ops(struct mddev *mddev)
>
> int mddev_init(struct mddev *mddev)
> {
> + int err = 0;
> +
> if (!IS_ENABLED(CONFIG_MD_BITMAP))
> mddev->bitmap_id = ID_BITMAP_NONE;
> else
> @@ -741,8 +743,26 @@ int mddev_init(struct mddev *mddev)
>
> if (percpu_ref_init(&mddev->writes_pending, no_op,
> PERCPU_REF_ALLOW_REINIT, GFP_KERNEL)) {
> - percpu_ref_exit(&mddev->active_io);
> - return -ENOMEM;
> + err = -ENOMEM;
> + goto exit_acitve_io;
> + }
> +
> + if (!bioset_initialized(&mddev->bio_set)) {
> + err = bioset_init(&mddev->bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
mddev_init() can only be called once for one mddev, no need to test if bioset
is initialized here.
> + if (err)
> + goto exit_writes_pending;
> + }
> + if (!bioset_initialized(&mddev->sync_set)) {
same here.
> + err = bioset_init(&mddev->sync_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
> + if (err)
> + goto exit_bio_set;
> + }
> +
> + if (!bioset_initialized(&mddev->io_clone_set)) {
And here.
Thanks,
Kuai
> + err = bioset_init(&mddev->io_clone_set, BIO_POOL_SIZE,
> + offsetof(struct md_io_clone, bio_clone), 0);
> + if (err)
> + goto exit_sync_set;
> }
>
> /* We want to start with the refcount at zero */
> @@ -773,11 +793,24 @@ int mddev_init(struct mddev *mddev)
> INIT_WORK(&mddev->del_work, mddev_delayed_delete);
>
> return 0;
> +
> +exit_sync_set:
> + bioset_exit(&mddev->sync_set);
> +exit_bio_set:
> + bioset_exit(&mddev->bio_set);
> +exit_writes_pending:
> + percpu_ref_exit(&mddev->writes_pending);
> +exit_acitve_io:
> + percpu_ref_exit(&mddev->active_io);
> + return err;
> }
> EXPORT_SYMBOL_GPL(mddev_init);
>
> void mddev_destroy(struct mddev *mddev)
> {
> + bioset_exit(&mddev->bio_set);
> + bioset_exit(&mddev->sync_set);
> + bioset_exit(&mddev->io_clone_set);
> percpu_ref_exit(&mddev->active_io);
> percpu_ref_exit(&mddev->writes_pending);
> }
> @@ -6393,29 +6426,9 @@ int md_run(struct mddev *mddev)
> nowait = nowait && bdev_nowait(rdev->bdev);
> }
>
> - if (!bioset_initialized(&mddev->bio_set)) {
> - err = bioset_init(&mddev->bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
> - if (err)
> - return err;
> - }
> - if (!bioset_initialized(&mddev->sync_set)) {
> - err = bioset_init(&mddev->sync_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
> - if (err)
> - goto exit_bio_set;
> - }
> -
> - if (!bioset_initialized(&mddev->io_clone_set)) {
> - err = bioset_init(&mddev->io_clone_set, BIO_POOL_SIZE,
> - offsetof(struct md_io_clone, bio_clone), 0);
> - if (err)
> - goto exit_sync_set;
> - }
> -
> pers = get_pers(mddev->level, mddev->clevel);
> - if (!pers) {
> - err = -EINVAL;
> - goto abort;
> - }
> + if (!pers)
> + return -EINVAL;
> if (mddev->level != pers->head.id) {
> mddev->level = pers->head.id;
> mddev->new_level = pers->head.id;
> @@ -6426,8 +6439,7 @@ int md_run(struct mddev *mddev)
> pers->start_reshape == NULL) {
> /* This personality cannot handle reshaping... */
> put_pers(pers);
> - err = -EINVAL;
> - goto abort;
> + return -EINVAL;
> }
>
> if (pers->sync_request) {
> @@ -6554,12 +6566,6 @@ int md_run(struct mddev *mddev)
> mddev->private = NULL;
> put_pers(pers);
> md_bitmap_destroy(mddev);
> -abort:
> - bioset_exit(&mddev->io_clone_set);
> -exit_sync_set:
> - bioset_exit(&mddev->sync_set);
> -exit_bio_set:
> - bioset_exit(&mddev->bio_set);
> return err;
> }
> EXPORT_SYMBOL_GPL(md_run);
> @@ -6784,10 +6790,6 @@ static void __md_stop(struct mddev *mddev)
> mddev->private = NULL;
> put_pers(pers);
> clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> -
> - bioset_exit(&mddev->bio_set);
> - bioset_exit(&mddev->sync_set);
> - bioset_exit(&mddev->io_clone_set);
> }
>
> void md_stop(struct mddev *mddev)
next prev parent reply other threads:[~2025-10-28 12:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 7:29 [PATCH v7 0/4] make logical block size configurable linan122
2025-10-27 7:29 ` [PATCH v7 1/4] md: delete md_redundancy_group when array is becoming inactive linan122
2025-10-28 11:57 ` Yu Kuai
2025-10-27 7:29 ` [PATCH v7 2/4] md: init bioset in mddev_init linan122
2025-10-28 12:01 ` Yu Kuai [this message]
2025-10-29 2:35 ` Li Nan
2025-10-27 7:29 ` [PATCH v7 3/4] md/raid0: Move queue limit setup before r0conf initialization linan122
2025-10-28 12:12 ` Yu Kuai
2025-10-29 2:37 ` Li Nan
2025-10-27 7:29 ` [PATCH v7 4/4] md: allow configuring logical block size linan122
2025-10-28 12:23 ` Yu Kuai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=69829383-8212-473b-9346-d093d33f1d27@fnnas.com \
--to=yukuai@fnnas.com \
--cc=corbet@lwn.net \
--cc=hare@suse.de \
--cc=linan122@huawei.com \
--cc=linan666@huaweicloud.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=song@kernel.org \
--cc=xni@redhat.com \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®