[PATCH v3 2/2] dt-bindings: iio: proximity: Add Lidar-lite-v2 and v3

[Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>]

Since v2 is not a trivial device, add it to a dedicated place. The v3 is
similar to the v2 version, so add it as a fallback to the v2. Both versions
are already supported by the driver.

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
---
 .../proximity/pulsedlight,lidar-lite-v2.yaml  | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml

diff --git a/Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml b/Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml
new file mode 100644
index 000000000000..21c9239c64dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/pulsedlight,lidar-lite-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pulsedlight LIDAR-Lite v2 range-finding sensor
+
+maintainers:
+  - Matt Ranostay <mranostay@gmail.com>
+
+description: |
+  Support for LIDAR_Lite v2 and v3 laser rangefinders. These devices
+  can use a simple I2C communication bus or can operate in a PWM mode using a
+  mode control pin to trigger acquisitions and return the measured distance.
+  It also have a power enable pin, which can be used to shut off the device.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - grmn,lidar-lite-v3
+          - const: pulsedlight,lidar-lite-v2
+      - const: pulsedlight,lidar-lite-v2
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO that can be driven low to shut off power to the device.
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        lidar@62 {
+            compatible = "grmn,lidar-lite-v3", "pulsedlight,lidar-lite-v2";
+            reg = <0x62>;
+            vdd-supply = <&vdd_5v0>;
+        };
+    };
+...
-- 
2.48.1