From: Krzysztof Kozlowski <krzk@kernel.org>
To: zhangsenchuan@eswincomputing.com
Cc: bhelgaas@google.com, mani@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, lpieralisi@kernel.org,
kwilczynski@kernel.org, robh@kernel.org, p.zabel@pengutronix.de,
jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, christian.bruel@foss.st.com,
mayank.rana@oss.qualcomm.com, shradha.t@samsung.com,
krishna.chundru@oss.qualcomm.com, thippeswamy.havalige@amd.com,
inochiama@gmail.com, ningyu@eswincomputing.com,
linmin@eswincomputing.com, pinkesh.vaghela@einfochips.com,
ouyanghui@eswincomputing.com
Subject: Re: [PATCH v4 1/2] dt-bindings: PCI: EIC7700: Add Eswin PCIe host controller
Date: Mon, 3 Nov 2025 09:48:02 +0100 [thread overview]
Message-ID: <20251103-gentle-precise-bloodhound-ef7136@kuoka> (raw)
In-Reply-To: <20251030083057.1324-1-zhangsenchuan@eswincomputing.com>
On Thu, Oct 30, 2025 at 04:30:57PM +0800, zhangsenchuan@eswincomputing.com wrote:
> From: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
>
> Add Device Tree binding documentation for the Eswin EIC7700 PCIe
> controller module, the PCIe controller enables the core to correctly
> initialize and manage the PCIe bus and connected devices.
>
> Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
> Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
> Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
> ---
> .../bindings/pci/eswin,eic7700-pcie.yaml | 166 ++++++++++++++++++
> .../bindings/pci/snps,dw-pcie-common.yaml | 2 +-
> 2 files changed, 167 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/pci/eswin,eic7700-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/eswin,eic7700-pcie.yaml b/Documentation/devicetree/bindings/pci/eswin,eic7700-pcie.yaml
> new file mode 100644
> index 000000000000..e6c05e3a093a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/eswin,eic7700-pcie.yaml
> @@ -0,0 +1,166 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/eswin,eic7700-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Eswin EIC7700 PCIe host controller
> +
> +maintainers:
> + - Yu Ning <ningyu@eswincomputing.com>
> + - Senchuan Zhang <zhangsenchuan@eswincomputing.com>
> + - Yanghui Ou <ouyanghui@eswincomputing.com>
> +
> +description:
> + The PCIe controller on EIC7700 SoC.
> +
> +properties:
> + compatible:
> + const: eswin,eic7700-pcie
> +
> + reg:
> + maxItems: 3
> +
> + reg-names:
> + items:
> + - const: dbi
> + - const: config
> + - const: mgmt
That's deprecated. Read its description. That's just elbi.
> +
> + ranges:
> + maxItems: 3
> +
> + '#interrupt-cells':
> + const: 1
> +
> + interrupt-names:
> + items:
> + - const: msi
> + - const: inta
> + - const: intb
> + - const: intc
> + - const: intd
Thse are legacy signals. Why are you using legacy?
> +
> + interrupt-map:
> + maxItems: 4
> +
> + interrupt-map-mask:
> + items:
> + - const: 0
> + - const: 0
> + - const: 0
> + - const: 7
> +
> + clocks:
> + maxItems: 4
> +
> + clock-names:
> + items:
> + - const: mstr
> + - const: dbi
> + - const: pclk
Deprecated name.
> + - const: aux
> +
> + resets:
> + maxItems: 2
> +
> + reset-names:
> + items:
> + - const: dbi
> + - const: powerup
No such name.
> +
> +patternProperties:
> + "^pcie@":
> + type: object
> + $ref: /schemas/pci/pci-pci-bridge.yaml#
> +
> + properties:
> + reg:
> + maxItems: 1
> +
> + num-lanes:
> + maximum: 4
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: perst
> +
> + required:
> + - reg
> + - ranges
> + - num-lanes
> + - resets
> + - reset-names
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - ranges
> + - interrupts
> + - interrupt-names
> + - interrupt-map-mask
> + - interrupt-map
> + - '#interrupt-cells'
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> +
> +allOf:
> + - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pcie@54000000 {
> + compatible = "eswin,eic7700-pcie";
> + reg = <0x0 0x54000000 0x0 0x4000000>,
> + <0x0 0x40000000 0x0 0x800000>,
> + <0x0 0x50000000 0x0 0x100000>;
> + reg-names = "dbi", "config", "mgmt";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x01000000 0x0 0x40800000 0x0 0x40800000 0x0 0x800000>,
> + <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0xf000000>,
> + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x2 0x00000000>;
> + bus-range = <0x00 0xff>;
> + clocks = <&clock 144>,
> + <&clock 145>,
> + <&clock 146>,
> + <&clock 147>;
> + clock-names = "mstr", "dbi", "pclk", "aux";
> + resets = <&reset 97>,
> + <&reset 98>;
> + reset-names = "dbi", "powerup";
> + interrupts = <220>, <179>, <180>, <181>, <182>, <183>, <184>, <185>, <186>;
> + interrupt-names = "msi", "inta", "intb", "intc", "intd";
> + interrupt-parent = <&plic>;
> + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> + interrupt-map = <0x0 0x0 0x0 0x1 &plic 179>,
> + <0x0 0x0 0x0 0x2 &plic 180>,
> + <0x0 0x0 0x0 0x3 &plic 181>,
> + <0x0 0x0 0x0 0x4 &plic 182>;
> + device_type = "pci";
> + pcie@0 {
> + reg = <0x0 0x0 0x0 0x0 0x0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + device_type = "pci";
> + num-lanes = <4>;
> + resets = <&reset 99>;
> + reset-names = "perst";
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> index 34594972d8db..cff52d0026b0 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
> @@ -176,7 +176,7 @@ properties:
> - description: See native 'phy' reset for details
> enum: [ pciephy, link ]
> - description: See native 'pwr' reset for details
> - enum: [ turnoff ]
> + enum: [ turnoff, powerup ]
NAK, you cannot add more deprecated names. Do you understand what
deprecated/legacy mean?
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-11-03 8:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-30 8:28 [PATCH v4 0/2] Add driver support for Eswin EIC7700 SoC PCIe controller zhangsenchuan
2025-10-30 8:30 ` [PATCH v4 1/2] dt-bindings: PCI: EIC7700: Add Eswin PCIe host controller zhangsenchuan
2025-11-03 8:48 ` Krzysztof Kozlowski [this message]
2025-11-03 9:02 ` Manivannan Sadhasivam
2025-11-03 11:26 ` Krzysztof Kozlowski
2025-11-10 9:27 ` zhangsenchuan
2025-10-30 8:31 ` [PATCH v4 2/2] PCI: EIC7700: Add Eswin PCIe host controller driver zhangsenchuan
2025-10-30 8:43 ` Philipp Zabel
2025-10-30 23:21 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103-gentle-precise-bloodhound-ef7136@kuoka \
--to=krzk@kernel.org \
--cc=bhelgaas@google.com \
--cc=christian.bruel@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=inochiama@gmail.com \
--cc=jingoohan1@gmail.com \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linmin@eswincomputing.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mayank.rana@oss.qualcomm.com \
--cc=ningyu@eswincomputing.com \
--cc=ouyanghui@eswincomputing.com \
--cc=p.zabel@pengutronix.de \
--cc=pinkesh.vaghela@einfochips.com \
--cc=robh@kernel.org \
--cc=shradha.t@samsung.com \
--cc=thippeswamy.havalige@amd.com \
--cc=zhangsenchuan@eswincomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®