From: Jacky Chou <jacky_chou@aspeedtech.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Po-Yu Chuang <ratbert@faraday-tech.com>,
Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <taoren@meta.com>,
Jacky Chou <jacky_chou@aspeedtech.com>
Subject: [PATCH net-next v3 0/4] Add AST2600 RGMII delay into ftgmac100
Date: Mon, 3 Nov 2025 15:39:15 +0800 [thread overview]
Message-ID: <20251103-rgmii_delay_2600-v3-0-e2af2656f7d7@aspeedtech.com> (raw)
This patch series adds support for configuring RGMII internal delays for the
Aspeed AST2600 FTGMAC100 Ethernet MACs. It introduces new compatible strings to
distinguish between MAC0/1 and MAC2/3, as their delay chains and configuration
units differ.
The device tree bindings are updated to restrict the allowed phy-mode and delay
properties for each MAC type. Corresponding changes are made to the device tree
source files and the FTGMAC100 driver to support the new delay configuration.
Summary of changes:
- dt-bindings: net: ftgmac100: Add conditional schema for AST2600 MAC0/1 and
MAC2/3, restrict delay properties, and require SCU phandle.
- ARM: dts: aspeed-g6: Add ethernet aliases to indentify the index of
MAC.
- ARM: dts: aspeed-ast2600-evb: Add new compatibles, scu handle and
rx/tx-internal-delay-ps properties and update phy-mode for MACs.
- net: ftgmac100: Add driver support for configuring RGMII delay for AST2600
MACs via SCU.
This enables precise RGMII timing configuration for AST2600-based platforms,
improving interoperability with various PHYs
---
v3:
- Add new item on compatible property for new compatible strings
- Remove the new compatible and scu handle of MAC from aspeed-g6.dtsi
- Add new compatible and scu handle to MAC node in
aspeed-ast2600-evb.dts
- Change all phy-mode of MACs to "rgmii-id"
- Keep "aspeed,ast2600-mac" compatible in ftgmac100.c and configure the
rgmii delay with "aspeed,ast2600-mac01" and "aspeed,ast2600-mac23"
v2:
- added new compatible strings for MAC0/1 and MAC2/3
- updated device tree bindings to restrict phy-mode and delay properties
- refactored driver code to handle rgmii delay configuration
---
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
Jacky Chou (4):
dt-bindings: net: ftgmac100: Add delay properties for AST2600
ARM: dts: aspeed-g6: Add ethernet alise
ARM: dts: aspeed: ast2600-evb: Configure RGMII delay for MAC
net: ftgmac100: Add RGMII delay support for AST2600
.../devicetree/bindings/net/faraday,ftgmac100.yaml | 50 ++++++++++
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 28 +++++-
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 +
drivers/net/ethernet/faraday/ftgmac100.c | 110 +++++++++++++++++++++
drivers/net/ethernet/faraday/ftgmac100.h | 15 +++
5 files changed, 203 insertions(+), 4 deletions(-)
---
base-commit: 01cc760632b875c4ad0d8fec0b0c01896b8a36d4
change-id: 20251031-rgmii_delay_2600-a00b0248c7e6
Best regards,
--
Jacky Chou <jacky_chou@aspeedtech.com>
next reply other threads:[~2025-11-03 7:39 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 7:39 Jacky Chou [this message]
2025-11-03 7:39 ` [PATCH net-next v3 1/4] dt-bindings: net: ftgmac100: Add delay properties for AST2600 Jacky Chou
2025-11-04 2:38 ` Andrew Lunn
2025-11-04 5:14 ` Jacky Chou
2025-11-04 13:40 ` Andrew Lunn
2025-11-06 5:25 ` Jacky Chou
2025-11-04 4:07 ` Andrew Lunn
2025-11-04 5:22 ` 回覆: " Jacky Chou
2025-11-04 13:50 ` Andrew Lunn
2025-11-04 8:19 ` Krzysztof Kozlowski
2025-11-04 9:54 ` Jacky Chou
2025-11-04 10:07 ` Krzysztof Kozlowski
2025-11-06 5:41 ` Jacky Chou
2025-11-06 8:25 ` Krzysztof Kozlowski
2025-11-07 0:15 ` Jacky Chou
2025-11-07 0:46 ` Andrew Lunn
2025-11-07 1:12 ` Jacky Chou
2025-11-07 2:01 ` Andrew Lunn
2025-11-07 3:28 ` Jacky Chou
2025-11-03 7:39 ` [PATCH net-next v3 2/4] ARM: dts: aspeed-g6: Add ethernet alise Jacky Chou
2025-11-03 7:39 ` [PATCH net-next v3 3/4] ARM: dts: aspeed: ast2600-evb: Configure RGMII delay for MAC Jacky Chou
2025-11-04 3:49 ` Andrew Lunn
2025-11-04 4:00 ` Andrew Lunn
2025-11-04 4:54 ` 回覆: " Jacky Chou
2025-11-03 7:39 ` [PATCH net-next v3 4/4] net: ftgmac100: Add RGMII delay support for AST2600 Jacky Chou
2025-11-04 3:07 ` kernel test robot
2025-11-04 3:55 ` Andrew Lunn
2025-11-04 4:47 ` Jacky Chou
2025-11-04 8:20 ` [PATCH net-next v3 0/4] Add AST2600 RGMII delay into ftgmac100 Krzysztof Kozlowski
2025-11-04 8:35 ` 回覆: " Jacky Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103-rgmii_delay_2600-v3-0-e2af2656f7d7@aspeedtech.com \
--to=jacky_chou@aspeedtech.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ratbert@faraday-tech.com \
--cc=robh@kernel.org \
--cc=taoren@meta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®