From: Coia Prant <coiaprant@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Coia Prant <coiaprant@gmail.com>
Subject: [PATCH] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
Date: Fri, 7 Nov 2025 21:38:38 +0800 [thread overview]
Message-ID: <20251107133839.300252-1-coiaprant@gmail.com> (raw)
Fix indentation, remove unused SDIO properties, and drop the GMAC clock
that was used for input direction. The board uses the clock as
output, so the input clock is not needed.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
.../dts/rockchip/rk3568-9tripod-x3568-v4.dts | 25 +++++++------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
index 443ed7d4b..ad4d62060 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
@@ -273,11 +273,10 @@ &gmac0 {
clock_in_out = "output";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
- &gmac0_tx_bus2
- &gmac0_rx_bus2
- &gmac0_rgmii_clk
- &gmac0_rgmii_bus
- &gmac0_clkinout>;
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
status = "okay";
@@ -290,11 +289,10 @@ &gmac1 {
clock_in_out = "output";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
- &gmac1m1_tx_bus2
- &gmac1m1_rx_bus2
- &gmac1m1_rgmii_clk
- &gmac1m1_rgmii_bus
- &gmac1m1_clkinout>;
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus>;
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
status = "okay";
@@ -674,8 +672,7 @@ led_work_en: led_work_en {
pmic {
pmic_int: pmic_int {
- rockchip,pins =
- <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -763,7 +760,6 @@ &sdmmc0 {
/* used for AP6275S WiFi */
&sdmmc2 {
bus-width = <4>;
- disable-wp;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
@@ -771,9 +767,6 @@ &sdmmc2 {
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sys>;
vqmmc-supply = <&vcc_1v8>;
--
2.47.3
next reply other threads:[~2025-11-07 13:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 13:38 Coia Prant [this message]
2025-11-13 23:04 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251107133839.300252-1-coiaprant@gmail.com \
--to=coiaprant@gmail.com \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®