mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
@ 2025-11-07 13:38 Coia Prant
  2025-11-13 23:04 ` Heiko Stuebner
  0 siblings, 1 reply; 2+ messages in thread
From: Coia Prant @ 2025-11-07 13:38 UTC (permalink / raw)
  To: Heiko Stuebner; +Cc: linux-rockchip, linux-kernel, Coia Prant

Fix indentation, remove unused SDIO properties, and drop the GMAC clock
that was used for input direction. The board uses the clock as
output, so the input clock is not needed.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 .../dts/rockchip/rk3568-9tripod-x3568-v4.dts  | 25 +++++++------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
index 443ed7d4b..ad4d62060 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
@@ -273,11 +273,10 @@ &gmac0 {
 	clock_in_out = "output";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
-			&gmac0_tx_bus2
-			&gmac0_rx_bus2
-			&gmac0_rgmii_clk
-			&gmac0_rgmii_bus
-			&gmac0_clkinout>;
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
 	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -290,11 +289,10 @@ &gmac1 {
 	clock_in_out = "output";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim
-			&gmac1m1_tx_bus2
-			&gmac1m1_rx_bus2
-			&gmac1m1_rgmii_clk
-			&gmac1m1_rgmii_bus
-			&gmac1m1_clkinout>;
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -674,8 +672,7 @@ led_work_en: led_work_en {
 
 	pmic {
 		pmic_int: pmic_int {
-			rockchip,pins =
-				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -763,7 +760,6 @@ &sdmmc0 {
 /* used for AP6275S WiFi */
 &sdmmc2 {
 	bus-width = <4>;
-	disable-wp;
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
@@ -771,9 +767,6 @@ &sdmmc2 {
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v3_sys>;
 	vqmmc-supply = <&vcc_1v8>;
-- 
2.47.3


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
  2025-11-07 13:38 [PATCH] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4 Coia Prant
@ 2025-11-13 23:04 ` Heiko Stuebner
  0 siblings, 0 replies; 2+ messages in thread
From: Heiko Stuebner @ 2025-11-13 23:04 UTC (permalink / raw)
  To: Coia Prant; +Cc: Heiko Stuebner, linux-rockchip, linux-kernel


On Fri, 07 Nov 2025 21:38:38 +0800, Coia Prant wrote:
> Fix indentation, remove unused SDIO properties, and drop the GMAC clock
> that was used for input direction. The board uses the clock as
> output, so the input clock is not needed.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
      commit: c1ffe499306b26a61f390b7d83c5703aa8e2af55

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2025-11-13 23:04 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-11-07 13:38 [PATCH] arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4 Coia Prant
2025-11-13 23:04 ` Heiko Stuebner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®