[PATCH v2] gpio: menz127: add support for 16Z034 and 16Z037 GPIO controllers

[Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>]

The 16Z034 and 16Z037 are 8 bits GPIO controllers that share the
same registers and features of the 16Z127 GPIO controller.

Reviewed-by: Felipe Jensen Casado <felipe.jensen@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
---
 drivers/gpio/gpio-menz127.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-menz127.c b/drivers/gpio/gpio-menz127.c
index da2bf9381cc4..cddf16980817 100644
--- a/drivers/gpio/gpio-menz127.c
+++ b/drivers/gpio/gpio-menz127.c
@@ -24,6 +24,11 @@
 #define MEN_Z127_ODER	0x1C
 #define GPIO_TO_DBCNT_REG(gpio)	((gpio * 4) + 0x80)
 
+/* MEN Z127 supported model ids*/
+#define MEN_Z127_ID	0x7f
+#define MEN_Z034_ID	0x22
+#define MEN_Z037_ID	0x25
+
 #define MEN_Z127_DB_MIN_US	50
 /* 16 bit compare register. Each bit represents 50us */
 #define MEN_Z127_DB_MAX_US	(0xffff * MEN_Z127_DB_MIN_US)
@@ -140,6 +145,7 @@ static int men_z127_probe(struct mcb_device *mdev,
 	struct men_z127_gpio *men_z127_gpio;
 	struct device *dev = &mdev->dev;
 	int ret;
+	unsigned long sz;
 
 	men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio),
 				     GFP_KERNEL);
@@ -163,9 +169,21 @@ static int men_z127_probe(struct mcb_device *mdev,
 
 	mcb_set_drvdata(mdev, men_z127_gpio);
 
+	switch (mdev->id) {
+	case MEN_Z127_ID:
+		sz = 4;
+		break;
+	case MEN_Z034_ID:
+	case MEN_Z037_ID:
+		sz = 1;
+		break;
+	default:
+		return dev_err_probe(&mdev->dev, -EINVAL, "no size found for id %d", mdev->id);
+	}
+
 	config = (struct gpio_generic_chip_config) {
 		.dev = &mdev->dev,
-		.sz = 4,
+		.sz = sz,
 		.dat = men_z127_gpio->reg_base + MEN_Z127_PSR,
 		.set = men_z127_gpio->reg_base + MEN_Z127_CTRL,
 		.dirout = men_z127_gpio->reg_base + MEN_Z127_GPIODR,
@@ -186,7 +204,9 @@ static int men_z127_probe(struct mcb_device *mdev,
 }
 
 static const struct mcb_device_id men_z127_ids[] = {
-	{ .device = 0x7f },
+	{ .device = MEN_Z127_ID },
+	{ .device = MEN_Z034_ID },
+	{ .device = MEN_Z037_ID },
 	{ }
 };
 MODULE_DEVICE_TABLE(mcb, men_z127_ids);
@@ -204,4 +224,6 @@ MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
 MODULE_DESCRIPTION("MEN 16z127 GPIO Controller");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("mcb:16z127");
+MODULE_ALIAS("mcb:16z034");
+MODULE_ALIAS("mcb:16z037");
 MODULE_IMPORT_NS("MCB");
-- 
2.51.1