From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@oss.qualcomm.com, ajay.nandam@oss.qualcomm.com,
ravi.hothi@oss.qualcomm.com
Subject: [PATCH v1 1/2] dt-bindings: pinctrl: qcom,sa8775p-lpass-lpi-pinctrl: Add SA8775P LPASS pinctrl
Date: Sun, 16 Nov 2025 22:46:55 +0530 [thread overview]
Message-ID: <20251116171656.3105461-2-mohammad.rafi.shaik@oss.qualcomm.com> (raw)
In-Reply-To: <20251116171656.3105461-1-mohammad.rafi.shaik@oss.qualcomm.com>
Add bindings for the pin controller in Low Power Audio SubSystem (LPASS)
of Qualcomm SA8775P SoC.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
.../qcom,sa8775p-lpass-lpi-pinctrl.yaml | 106 ++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..01a56dbeaeff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775P SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SA8775P SoC.
+
+properties:
+ compatible:
+ const: qcom,sa8775p-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sa8775p-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sa8775p-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sa8775p-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+ function:
+ enum: [dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+ dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+ ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, i2s1_clk, i2s1_data,
+ i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data,
+ i2s3_ws, i2s4_clk, i2s4_data, i2s4_ws, qua_mi2s_sclk,
+ qua_mi2s_data, qua_mi2s_ws, slimbus_clk, slimbus_data,
+ swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+ wsa_swr_data, wsa2_swr_clk, wsa2_swr_data]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+allOf:
+ - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+ lpass_tlmm: pinctrl@3440000 {
+ compatible = "qcom,sa8775p-lpass-lpi-pinctrl";
+ reg = <0x0 0x03440000 0x0 0x20000>;
+
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+ tx-swr-sleep-clk-state {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2025-11-16 17:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-16 17:16 [PATCH v1 0/2] pinctrl: qcom: Add SA8775P lpass-lpi Mohammad Rafi Shaik
2025-11-16 17:16 ` Mohammad Rafi Shaik [this message]
2025-11-16 17:29 ` [PATCH v1 1/2] dt-bindings: pinctrl: qcom,sa8775p-lpass-lpi-pinctrl: Add SA8775P LPASS pinctrl Krzysztof Kozlowski
2025-11-16 18:09 ` Mohammad Rafi Shaik
2025-11-17 6:09 ` Krzysztof Kozlowski
2025-11-16 18:31 ` Rob Herring (Arm)
2025-11-17 12:44 ` Konrad Dybcio
2025-11-19 5:01 ` Mohammad Rafi Shaik
2025-11-16 17:16 ` [PATCH v1 2/2] pinctrl: qcom: sa8775p-lpass-lpi: " Mohammad Rafi Shaik
2025-11-17 13:17 ` Konrad Dybcio
2025-11-26 5:31 ` Mohammad Rafi Shaik
2025-11-27 11:06 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251116171656.3105461-2-mohammad.rafi.shaik@oss.qualcomm.com \
--to=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=ajay.nandam@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ravi.hothi@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=srinivas.kandagatla@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®