From: <ankita@nvidia.com>
To: <ankita@nvidia.com>, <jgg@ziepe.ca>, <yishaih@nvidia.com>,
<skolothumtho@nvidia.com>, <kevin.tian@intel.com>,
<alex@shazbot.org>, <aniketa@nvidia.com>, <vsethi@nvidia.com>,
<mochs@nvidia.com>
Cc: <Yunxiang.Li@amd.com>, <yi.l.liu@intel.com>,
<zhangdongdong@eswincomputing.com>, <avihaih@nvidia.com>,
<bhelgaas@google.com>, <peterx@redhat.com>, <pstanner@redhat.com>,
<apopple@nvidia.com>, <kvm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <cjia@nvidia.com>,
<kwankhede@nvidia.com>, <targupta@nvidia.com>, <zhiw@nvidia.com>,
<danw@nvidia.com>, <dnigam@nvidia.com>, <kjaju@nvidia.com>
Subject: [PATCH v3 1/7] vfio/nvgrace-gpu: Use faults to map device memory
Date: Fri, 21 Nov 2025 14:11:35 +0000 [thread overview]
Message-ID: <20251121141141.3175-2-ankita@nvidia.com> (raw)
In-Reply-To: <20251121141141.3175-1-ankita@nvidia.com>
From: Ankit Agrawal <ankita@nvidia.com>
To make use of the huge pfnmap support and to support zap/remap
sequence, fault/huge_fault ops based mapping mechanism needs to
be implemented.
Currently nvgrace-gpu module relies on remap_pfn_range to do
the mapping during VM bootup. Replace it to instead rely on fault
and use vmf_insert_pfn to setup the mapping.
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
---
drivers/vfio/pci/nvgrace-gpu/main.c | 50 ++++++++++++++++++-----------
1 file changed, 31 insertions(+), 19 deletions(-)
diff --git a/drivers/vfio/pci/nvgrace-gpu/main.c b/drivers/vfio/pci/nvgrace-gpu/main.c
index e346392b72f6..ecfecd0916c9 100644
--- a/drivers/vfio/pci/nvgrace-gpu/main.c
+++ b/drivers/vfio/pci/nvgrace-gpu/main.c
@@ -130,6 +130,33 @@ static void nvgrace_gpu_close_device(struct vfio_device *core_vdev)
vfio_pci_core_close_device(core_vdev);
}
+static vm_fault_t nvgrace_gpu_vfio_pci_fault(struct vm_fault *vmf)
+{
+ struct vm_area_struct *vma = vmf->vma;
+ struct nvgrace_gpu_pci_core_device *nvdev = vma->vm_private_data;
+ int index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
+ vm_fault_t ret = VM_FAULT_SIGBUS;
+ struct mem_region *memregion;
+ unsigned long pgoff, pfn;
+
+ memregion = nvgrace_gpu_memregion(index, nvdev);
+ if (!memregion)
+ return ret;
+
+ pgoff = (vmf->address - vma->vm_start) >> PAGE_SHIFT;
+ pfn = PHYS_PFN(memregion->memphys) + pgoff;
+
+ down_read(&nvdev->core_device.memory_lock);
+ ret = vmf_insert_pfn(vmf->vma, vmf->address, pfn);
+ up_read(&nvdev->core_device.memory_lock);
+
+ return ret;
+}
+
+static const struct vm_operations_struct nvgrace_gpu_vfio_pci_mmap_ops = {
+ .fault = nvgrace_gpu_vfio_pci_fault,
+};
+
static int nvgrace_gpu_mmap(struct vfio_device *core_vdev,
struct vm_area_struct *vma)
{
@@ -137,10 +164,8 @@ static int nvgrace_gpu_mmap(struct vfio_device *core_vdev,
container_of(core_vdev, struct nvgrace_gpu_pci_core_device,
core_device.vdev);
struct mem_region *memregion;
- unsigned long start_pfn;
u64 req_len, pgoff, end;
unsigned int index;
- int ret = 0;
index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
@@ -157,7 +182,6 @@ static int nvgrace_gpu_mmap(struct vfio_device *core_vdev,
((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
if (check_sub_overflow(vma->vm_end, vma->vm_start, &req_len) ||
- check_add_overflow(PHYS_PFN(memregion->memphys), pgoff, &start_pfn) ||
check_add_overflow(PFN_PHYS(pgoff), req_len, &end))
return -EOVERFLOW;
@@ -168,6 +192,8 @@ static int nvgrace_gpu_mmap(struct vfio_device *core_vdev,
if (end > memregion->memlength)
return -EINVAL;
+ vm_flags_set(vma, VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP);
+
/*
* The carved out region of the device memory needs the NORMAL_NC
* property. Communicate as such to the hypervisor.
@@ -184,23 +210,9 @@ static int nvgrace_gpu_mmap(struct vfio_device *core_vdev,
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
}
- /*
- * Perform a PFN map to the memory and back the device BAR by the
- * GPU memory.
- *
- * The available GPU memory size may not be power-of-2 aligned. The
- * remainder is only backed by vfio_device_ops read/write handlers.
- *
- * During device reset, the GPU is safely disconnected to the CPU
- * and access to the BAR will be immediately returned preventing
- * machine check.
- */
- ret = remap_pfn_range(vma, vma->vm_start, start_pfn,
- req_len, vma->vm_page_prot);
- if (ret)
- return ret;
- vma->vm_pgoff = start_pfn;
+ vma->vm_ops = &nvgrace_gpu_vfio_pci_mmap_ops;
+ vma->vm_private_data = nvdev;
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2025-11-21 14:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-21 14:11 [PATCH v3 0/7] vfio/nvgrace-gpu: Support huge PFNMAP and wait for GPU ready post reset ankita
2025-11-21 14:11 ` ankita [this message]
2025-11-21 14:11 ` [PATCH v3 2/7] vfio: export function to map the VMA ankita
2025-11-21 14:11 ` [PATCH v3 3/7] vfio/nvgrace-gpu: Add support for huge pfnmap ankita
2025-11-21 14:11 ` [PATCH v3 4/7] vfio: export vfio_find_cap_start ankita
2025-11-21 14:11 ` [PATCH v3 5/7] vfio: move barmap to a separate function and export ankita
2025-11-21 16:39 ` Alex Williamson
2025-11-21 20:58 ` Donald Dutile
2025-11-21 21:08 ` Alex Williamson
2025-11-21 14:11 ` [PATCH v3 6/7] vfio/nvgrace-gpu: split the code to wait for GPU ready ankita
2025-11-21 14:11 ` [PATCH v3 7/7] vfio/nvgrace-gpu: wait for the GPU mem to be ready ankita
2025-11-21 16:59 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251121141141.3175-2-ankita@nvidia.com \
--to=ankita@nvidia.com \
--cc=Yunxiang.Li@amd.com \
--cc=alex@shazbot.org \
--cc=aniketa@nvidia.com \
--cc=apopple@nvidia.com \
--cc=avihaih@nvidia.com \
--cc=bhelgaas@google.com \
--cc=cjia@nvidia.com \
--cc=danw@nvidia.com \
--cc=dnigam@nvidia.com \
--cc=jgg@ziepe.ca \
--cc=kevin.tian@intel.com \
--cc=kjaju@nvidia.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mochs@nvidia.com \
--cc=peterx@redhat.com \
--cc=pstanner@redhat.com \
--cc=skolothumtho@nvidia.com \
--cc=targupta@nvidia.com \
--cc=vsethi@nvidia.com \
--cc=yi.l.liu@intel.com \
--cc=yishaih@nvidia.com \
--cc=zhangdongdong@eswincomputing.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®