From: <ankita@nvidia.com>
To: <ankita@nvidia.com>, <jgg@ziepe.ca>, <yishaih@nvidia.com>,
<skolothumtho@nvidia.com>, <kevin.tian@intel.com>,
<alex@shazbot.org>, <aniketa@nvidia.com>, <vsethi@nvidia.com>,
<mochs@nvidia.com>
Cc: <Yunxiang.Li@amd.com>, <yi.l.liu@intel.com>,
<zhangdongdong@eswincomputing.com>, <avihaih@nvidia.com>,
<bhelgaas@google.com>, <peterx@redhat.com>, <pstanner@redhat.com>,
<apopple@nvidia.com>, <kvm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <cjia@nvidia.com>,
<kwankhede@nvidia.com>, <targupta@nvidia.com>, <zhiw@nvidia.com>,
<danw@nvidia.com>, <dnigam@nvidia.com>, <kjaju@nvidia.com>
Subject: [PATCH v3 6/7] vfio/nvgrace-gpu: split the code to wait for GPU ready
Date: Fri, 21 Nov 2025 14:11:40 +0000 [thread overview]
Message-ID: <20251121141141.3175-7-ankita@nvidia.com> (raw)
In-Reply-To: <20251121141141.3175-1-ankita@nvidia.com>
From: Ankit Agrawal <ankita@nvidia.com>
Split the function that check for the GPU device being ready on
the probe.
Move the code to wait for the GPU to be ready through BAR0 register
reads to a separate function. This would help reuse the code.
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
---
drivers/vfio/pci/nvgrace-gpu/main.c | 33 ++++++++++++++++++-----------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/vfio/pci/nvgrace-gpu/main.c b/drivers/vfio/pci/nvgrace-gpu/main.c
index 3883a9de170f..7618c3f515cc 100644
--- a/drivers/vfio/pci/nvgrace-gpu/main.c
+++ b/drivers/vfio/pci/nvgrace-gpu/main.c
@@ -130,6 +130,24 @@ static void nvgrace_gpu_close_device(struct vfio_device *core_vdev)
vfio_pci_core_close_device(core_vdev);
}
+static int nvgrace_gpu_wait_device_ready(void __iomem *io)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(POLL_TIMEOUT_MS);
+ int ret = -ETIME;
+
+ do {
+ if ((ioread32(io + C2C_LINK_BAR0_OFFSET) == STATUS_READY) &&
+ (ioread32(io + HBM_TRAINING_BAR0_OFFSET) == STATUS_READY)) {
+ ret = 0;
+ goto ready_check_exit;
+ }
+ msleep(POLL_QUANTUM_MS);
+ } while (!time_after(jiffies, timeout));
+
+ready_check_exit:
+ return ret;
+}
+
static vm_fault_t nvgrace_gpu_vfio_pci_huge_fault(struct vm_fault *vmf,
unsigned int order)
{
@@ -931,9 +949,8 @@ static bool nvgrace_gpu_has_mig_hw_bug(struct pci_dev *pdev)
* Ensure that the BAR0 region is enabled before accessing the
* registers.
*/
-static int nvgrace_gpu_wait_device_ready(struct pci_dev *pdev)
+static int nvgrace_gpu_check_device_ready(struct pci_dev *pdev)
{
- unsigned long timeout = jiffies + msecs_to_jiffies(POLL_TIMEOUT_MS);
void __iomem *io;
int ret = -ETIME;
@@ -951,16 +968,8 @@ static int nvgrace_gpu_wait_device_ready(struct pci_dev *pdev)
goto iomap_exit;
}
- do {
- if ((ioread32(io + C2C_LINK_BAR0_OFFSET) == STATUS_READY) &&
- (ioread32(io + HBM_TRAINING_BAR0_OFFSET) == STATUS_READY)) {
- ret = 0;
- goto reg_check_exit;
- }
- msleep(POLL_QUANTUM_MS);
- } while (!time_after(jiffies, timeout));
+ ret = nvgrace_gpu_wait_device_ready(io);
-reg_check_exit:
pci_iounmap(pdev, io);
iomap_exit:
pci_release_selected_regions(pdev, 1 << 0);
@@ -977,7 +986,7 @@ static int nvgrace_gpu_probe(struct pci_dev *pdev,
u64 memphys, memlength;
int ret;
- ret = nvgrace_gpu_wait_device_ready(pdev);
+ ret = nvgrace_gpu_check_device_ready(pdev);
if (ret)
return ret;
--
2.34.1
next prev parent reply other threads:[~2025-11-21 14:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-21 14:11 [PATCH v3 0/7] vfio/nvgrace-gpu: Support huge PFNMAP and wait for GPU ready post reset ankita
2025-11-21 14:11 ` [PATCH v3 1/7] vfio/nvgrace-gpu: Use faults to map device memory ankita
2025-11-21 14:11 ` [PATCH v3 2/7] vfio: export function to map the VMA ankita
2025-11-21 14:11 ` [PATCH v3 3/7] vfio/nvgrace-gpu: Add support for huge pfnmap ankita
2025-11-21 14:11 ` [PATCH v3 4/7] vfio: export vfio_find_cap_start ankita
2025-11-21 14:11 ` [PATCH v3 5/7] vfio: move barmap to a separate function and export ankita
2025-11-21 16:39 ` Alex Williamson
2025-11-21 20:58 ` Donald Dutile
2025-11-21 21:08 ` Alex Williamson
2025-11-21 14:11 ` ankita [this message]
2025-11-21 14:11 ` [PATCH v3 7/7] vfio/nvgrace-gpu: wait for the GPU mem to be ready ankita
2025-11-21 16:59 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251121141141.3175-7-ankita@nvidia.com \
--to=ankita@nvidia.com \
--cc=Yunxiang.Li@amd.com \
--cc=alex@shazbot.org \
--cc=aniketa@nvidia.com \
--cc=apopple@nvidia.com \
--cc=avihaih@nvidia.com \
--cc=bhelgaas@google.com \
--cc=cjia@nvidia.com \
--cc=danw@nvidia.com \
--cc=dnigam@nvidia.com \
--cc=jgg@ziepe.ca \
--cc=kevin.tian@intel.com \
--cc=kjaju@nvidia.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mochs@nvidia.com \
--cc=peterx@redhat.com \
--cc=pstanner@redhat.com \
--cc=skolothumtho@nvidia.com \
--cc=targupta@nvidia.com \
--cc=vsethi@nvidia.com \
--cc=yi.l.liu@intel.com \
--cc=yishaih@nvidia.com \
--cc=zhangdongdong@eswincomputing.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®