[PATCH v2] iio: accel: Change adxl345 depend to negate adxl35x

[PATCH v2] iio: accel: Change adxl345 depend to negate adxl35x

[Jorge Marques]

Change 'depends on INPUT_ADXL34X=n' to '!(INPUT_ADXL34X)' to allow both
drivers to be compiled as modules. The user then can use the blacklist
to block loading one.

Signed-off-by: Jorge Marques <jorge.marques@analog.com>
---
There are two drivers for the compatible:

- adi,adxl345

* IIO: 
  drivers/iio/accel/adxl345_core.c
  drivers/iio/accel/adxl345_spi.c
  drivers/iio/accel/adxl345_i2c.c
* Inputs:
  drivers/input/misc/adxl34x-spi.c
  drivers/input/misc/adxl34x-i2c.c

To disallows both being complied, the depends INPUT_ADXL34X=n
was added to ADXL345 symbols. However, it should be possible to compile
both as modules, then blacklist one of them in the /etc/modprobe.d/blacklist.conf
file. This patch changes the rule to !(INPUT_ADXL34X) to allow both as
modules, but still disallow INPUT_ADXL34X to be built-in and ADXL345 as
module.

The following compatibles are not shared between both drivers:

* IIO:
  adi,adxl375 spi/i2c
* Inputs:
  adi,adxl34x i2c
---
Changes in v2:
- Added warning to Kconfig for users to not add both to the kernel.
  A similar patch will be sent to the input subsystem.
- Link to v1: https://lore.kernel.org/r/20251031-adxl345-allow-adxl34x-mod-v1-1-cd65749ba89c@analog.com
---
 drivers/iio/accel/Kconfig | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 76911278fb217..3d3f8d8673dde 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -64,7 +64,7 @@ config ADXL345
 
 config ADXL345_I2C
 	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
-	depends on INPUT_ADXL34X=n
+	depends on !INPUT_ADXL34X
 	depends on I2C
 	select ADXL345
 	select REGMAP_I2C
@@ -74,11 +74,12 @@ config ADXL345_I2C
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called adxl345_i2c and you will also get adxl345_core
-	  for the core module.
+	  for the core module. INPUT_ADXL34X share compatibles with this
+	  driver, do not add both modules to the kernel.
 
 config ADXL345_SPI
 	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
-	depends on INPUT_ADXL34X=n
+	depends on !INPUT_ADXL34X
 	depends on SPI
 	select ADXL345
 	select REGMAP_SPI
@@ -88,7 +89,8 @@ config ADXL345_SPI
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called adxl345_spi and you will also get adxl345_core
-	  for the core module.
+	  for the core module. INPUT_ADXL34X share compatibles with this
+	  driver, do not add both modules to the kernel.
 
 config ADXL355
 	tristate

---
base-commit: 70437bbd7529e9860fb7f0c92a89e0e6abaa994e
change-id: 20251031-adxl345-allow-adxl34x-mod-8c3b11cb54c6

Best regards,
-- 
Jorge Marques <jorge.marques@analog.com>

Re: [PATCH v2] iio: accel: Change adxl345 depend to negate adxl35x

[Jonathan Cameron]

On Wed, 12 Nov 2025 23:06:38 +0100
Jorge Marques <jorge.marques@analog.com> wrote:

> Change 'depends on INPUT_ADXL34X=n' to '!(INPUT_ADXL34X)' to allow both
> drivers to be compiled as modules. The user then can use the blacklist
> to block loading one.
> 
> Signed-off-by: Jorge Marques <jorge.marques@analog.com>

Applied to my local branch that I'll just push out as testing until
I can rebase on rc1.

Thanks

Jonathan