* [PATCH] iio: imu: inv_icm42600: enable temp polling when buffer is on
@ 2025-12-18 9:21 Jean-Baptiste Maneyrol via B4 Relay
2025-12-21 18:43 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Jean-Baptiste Maneyrol via B4 Relay @ 2025-12-18 9:21 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko
Cc: linux-iio, linux-kernel, Jean-Baptiste Maneyrol
From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Delete iio_device_claim_direct_mode() when reading temperature.
It enables polling of temperature data while buffer is on and it
doesn't have any impact on the other sensors.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
index 30f6a9595eea2308ef9ab0660210fc14ca758198..727b03d541a58a27cc9d793da78d1f4a1c460297 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
@@ -59,10 +59,7 @@ int inv_icm42600_temp_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (!iio_device_claim_direct(indio_dev))
- return -EBUSY;
ret = inv_icm42600_temp_read(st, &temp);
- iio_device_release_direct(indio_dev);
if (ret)
return ret;
*val = temp;
---
base-commit: a7b10f0963c651a6406d958a5f64b9c5594f84da
change-id: 20251218-inv-icm42600-do-not-block-temperature-polling-6533056cb30f
Best regards,
--
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] iio: imu: inv_icm42600: enable temp polling when buffer is on
2025-12-18 9:21 [PATCH] iio: imu: inv_icm42600: enable temp polling when buffer is on Jean-Baptiste Maneyrol via B4 Relay
@ 2025-12-21 18:43 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2025-12-21 18:43 UTC (permalink / raw)
To: Jean-Baptiste Maneyrol via B4 Relay
Cc: jean-baptiste.maneyrol, David Lechner, Nuno Sá,
Andy Shevchenko, linux-iio, linux-kernel
On Thu, 18 Dec 2025 10:21:17 +0100
Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@kernel.org> wrote:
> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
>
> Delete iio_device_claim_direct_mode() when reading temperature.
> It enables polling of temperature data while buffer is on and it
> doesn't have any impact on the other sensors.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Applied to the togreg branch of iio.git. Initially pushed out as testing
to let 0-day take a look at it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
> index 30f6a9595eea2308ef9ab0660210fc14ca758198..727b03d541a58a27cc9d793da78d1f4a1c460297 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
> @@ -59,10 +59,7 @@ int inv_icm42600_temp_read_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - if (!iio_device_claim_direct(indio_dev))
> - return -EBUSY;
> ret = inv_icm42600_temp_read(st, &temp);
> - iio_device_release_direct(indio_dev);
> if (ret)
> return ret;
> *val = temp;
>
> ---
> base-commit: a7b10f0963c651a6406d958a5f64b9c5594f84da
> change-id: 20251218-inv-icm42600-do-not-block-temperature-polling-6533056cb30f
>
> Best regards,
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-12-21 18:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-12-18 9:21 [PATCH] iio: imu: inv_icm42600: enable temp polling when buffer is on Jean-Baptiste Maneyrol via B4 Relay
2025-12-21 18:43 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®