From: Beleswar Padhi <b-padhi@ti.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>
Cc: <afd@ti.com>, <u-kumar1@ti.com>, <hnagalla@ti.com>,
<b-padhi@ti.com>, <linux-remoteproc@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 2/3] arm64: dts: ti: k3-{j784s4-j742s2/j721s2}-mcu-wakeup: Add HSM M4F node
Date: Wed, 31 Dec 2025 22:21:01 +0530 [thread overview]
Message-ID: <20251231165102.950644-3-b-padhi@ti.com> (raw)
In-Reply-To: <20251231165102.950644-1-b-padhi@ti.com>
The TI K3 J721S2, J784S4 and J742S2 SoCs have a HSM (High Security
Module) M4F core in the Wakeup Voltage Domain which could be used to run
secure services like Authentication. Add Device Tree Node definitions
for the HSM core in the respective SoC wakeup dtsi files.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 15 +++++++++++++++
.../ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi | 15 +++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 2a7f9c519735a..712c3bcbb6f84 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -766,4 +766,19 @@ mcu_watchdog1: watchdog@40610000 {
/* reserved for MCU_R5F0_1 */
status = "reserved";
};
+
+ hsm_m4fss: m4fss@43c00000 {
+ compatible = "ti,hsm-m4fss";
+ reg = <0x00 0x43c00000 0x00 0x20000>,
+ <0x00 0x43c20000 0x00 0x10000>,
+ <0x00 0x43c30000 0x00 0x10000>;
+ reg-names = "sram0_0", "sram0_1", "sram1";
+ resets = <&k3_reset 304 1>;
+ firmware-name = "hsm.bin";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <304>;
+ ti,sci-proc-ids = <0x80 0xff>;
+ status = "disabled";
+ bootph-pre-ram;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index cc22bfb5f5996..42565f41b7bac 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -762,4 +762,19 @@ mcu_watchdog1: watchdog@40610000 {
/* reserved for MCU_R5F0_1 */
status = "reserved";
};
+
+ hsm_m4fss: m4fss@43c00000 {
+ compatible = "ti,hsm-m4fss";
+ reg = <0x00 0x43c00000 0x00 0x20000>,
+ <0x00 0x43c20000 0x00 0x10000>,
+ <0x00 0x43c30000 0x00 0x10000>;
+ reg-names = "sram0_0", "sram0_1", "sram1";
+ resets = <&k3_reset 371 1>;
+ firmware-name = "hsm.bin";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <371>;
+ ti,sci-proc-ids = <0x80 0xff>;
+ status = "disabled";
+ bootph-pre-ram;
+ };
};
--
2.34.1
next prev parent reply other threads:[~2025-12-31 16:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-31 16:50 [PATCH 0/3] Add TI K3 HSM M4F nodes in device-tree Beleswar Padhi
2025-12-31 16:51 ` [PATCH 1/3] dt-bindings: remoteproc: Add bindings for HSM core on TI K3 SoCs Beleswar Padhi
2026-01-02 12:30 ` Krzysztof Kozlowski
2026-01-05 5:56 ` Padhi, Beleswar
2026-01-05 7:10 ` Krzysztof Kozlowski
2026-01-05 7:28 ` Padhi, Beleswar
2025-12-31 16:51 ` Beleswar Padhi [this message]
2025-12-31 16:51 ` [PATCH 3/3] arm64: dts: ti: k3-am62p-j722s-common-main: Add HSM M4F node Beleswar Padhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251231165102.950644-3-b-padhi@ti.com \
--to=b-padhi@ti.com \
--cc=afd@ti.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®