[PATCH v5] dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema

[PATCH v5] dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema

[Charan Pedumuru]

Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
Changes during Conversion:
- Define new properties `power-domains` and `operating-points-v2`
  because the existing in tree DTS uses them.
- Modify MAINTAINERS references to point the created YAML file.

Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
---
Changes in v5:
- Modify MAINTAINERS references to point YAML instead of TEXT file.
- Link to v4: https://lore.kernel.org/r/20260103-nvidia-nand-v4-1-3156f46f3a5e@gmail.com

Changes in v4:
- Changed the the reg property for nand child node.
- Link to v3: https://lore.kernel.org/r/20251231-nvidia-nand-v3-1-2e67664d3674@gmail.com

Changes in v3:
- Removed pattern properties for partition.
- Used single quotes for nand string in pattern properties.
- Modified maxItems value and added minItems to reg property under nand child node.
- Link to v2: https://lore.kernel.org/r/20251229-nvidia-nand-v2-1-b697d9724b0b@gmail.com

Changes in v2:
- Edited the commit description to match the updated changes.
- Modified the description for the YAML.
- Removed all the duplicated properties, defined a proper ref for both parent
  and child nodes.
- Removed unnecessary properties from the required following the old
  text binding.
- Link to v1: https://lore.kernel.org/r/20251030-nvidia-nand-v1-1-7614e1428292@gmail.com
---
 .../bindings/mtd/nvidia,tegra20-nand.yaml          | 102 +++++++++++++++++++++
 .../bindings/mtd/nvidia-tegra20-nand.txt           |  64 -------------
 MAINTAINERS                                        |   2 +-
 3 files changed, 103 insertions(+), 65 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.yaml b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.yaml
new file mode 100644
index 000000000000..b417d72fa0de
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nvidia,tegra20-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NAND Flash Controller
+
+maintainers:
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+description:
+  The NVIDIA NAND controller provides an interface between NVIDIA SoCs
+  and raw NAND flash devices. It supports standard NAND operations,
+  hardware-assisted ECC, OOB data access, and DMA transfers, and
+  integrates with the Linux MTD NAND subsystem for reliable flash management.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nand
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nand
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2:
+    maxItems: 1
+
+patternProperties:
+  '^nand@':
+    type: object
+    description: Individual NAND chip connected to the NAND controller
+    $ref: raw-nand-chip.yaml#
+
+    properties:
+      reg:
+        maximum: 5
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    nand-controller@70008000 {
+        compatible = "nvidia,tegra20-nand";
+        reg = <0x70008000 0x100>;
+        interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+        clock-names = "nand";
+        resets = <&tegra_car 13>;
+        reset-names = "nand";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            nand-bus-width = <8>;
+            nand-on-flash-bbt;
+            nand-ecc-algo = "bch";
+            nand-ecc-strength = <8>;
+            wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
deleted file mode 100644
index 4a00ec2b2540..000000000000
--- a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-NVIDIA Tegra NAND Flash controller
-
-Required properties:
-- compatible: Must be one of:
-  - "nvidia,tegra20-nand"
-- reg: MMIO address range
-- interrupts: interrupt output of the NFC controller
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - nand
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - nand
-
-Optional children nodes:
-Individual NAND chips are children of the NAND controller node. Currently
-only one NAND chip supported.
-
-Required children node properties:
-- reg: An integer ranging from 1 to 6 representing the CS line to use.
-
-Optional children node properties:
-- nand-ecc-mode: String, operation mode of the NAND ecc mode. Currently only
-		 "hw" is supported.
-- nand-ecc-algo: string, algorithm of NAND ECC.
-		 Supported values with "hw" ECC mode are: "rs", "bch".
-- nand-bus-width : See nand-controller.yaml
-- nand-on-flash-bbt: See nand-controller.yaml
-- nand-ecc-strength: integer representing the number of bits to correct
-		     per ECC step (always 512). Supported strength using HW ECC
-		     modes are:
-		     - RS: 4, 6, 8
-		     - BCH: 4, 8, 14, 16
-- nand-ecc-maximize: See nand-controller.yaml
-- nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
-		       are chosen.
-- wp-gpios: GPIO specifier for the write protect pin.
-
-Optional child node of NAND chip nodes:
-Partitions: see mtd.yaml
-
-  Example:
-	nand-controller@70008000 {
-		compatible = "nvidia,tegra20-nand";
-		reg = <0x70008000 0x100>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
-		clock-names = "nand";
-		resets = <&tegra_car 13>;
-		reset-names = "nand";
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			nand-bus-width = <8>;
-			nand-on-flash-bbt;
-			nand-ecc-algo = "bch";
-			nand-ecc-strength = <8>;
-			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
-		};
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index e791f18b61d8..519dac4cc9c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24829,7 +24829,7 @@ TEGRA NAND DRIVER
 M:	Stefan Agner <stefan@agner.ch>
 M:	Lucas Stach <dev@lynxeye.de>
 S:	Maintained
-F:	Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
+F:	Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.yaml
 F:	drivers/mtd/nand/raw/tegra_nand.c
 
 TEGRA PWM DRIVER

---
base-commit: 43edce71d70c603d3f3f1b1c886f65cd02d80c24
change-id: 20251011-nvidia-nand-024cc7ae8b0a

Best regards,
-- 
Charan Pedumuru <charan.pedumuru@gmail.com>

Re: [PATCH v5] dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema

[Rob Herring (Arm)]

On Sun, 04 Jan 2026 11:23:04 +0000, Charan Pedumuru wrote:
> Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
> Changes during Conversion:
> - Define new properties `power-domains` and `operating-points-v2`
>   because the existing in tree DTS uses them.
> - Modify MAINTAINERS references to point the created YAML file.
> 
> Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
> ---
> Changes in v5:
> - Modify MAINTAINERS references to point YAML instead of TEXT file.
> - Link to v4: https://lore.kernel.org/r/20260103-nvidia-nand-v4-1-3156f46f3a5e@gmail.com
> 
> Changes in v4:
> - Changed the the reg property for nand child node.
> - Link to v3: https://lore.kernel.org/r/20251231-nvidia-nand-v3-1-2e67664d3674@gmail.com
> 
> Changes in v3:
> - Removed pattern properties for partition.
> - Used single quotes for nand string in pattern properties.
> - Modified maxItems value and added minItems to reg property under nand child node.
> - Link to v2: https://lore.kernel.org/r/20251229-nvidia-nand-v2-1-b697d9724b0b@gmail.com
> 
> Changes in v2:
> - Edited the commit description to match the updated changes.
> - Modified the description for the YAML.
> - Removed all the duplicated properties, defined a proper ref for both parent
>   and child nodes.
> - Removed unnecessary properties from the required following the old
>   text binding.
> - Link to v1: https://lore.kernel.org/r/20251030-nvidia-nand-v1-1-7614e1428292@gmail.com
> ---
>  .../bindings/mtd/nvidia,tegra20-nand.yaml          | 102 +++++++++++++++++++++
>  .../bindings/mtd/nvidia-tegra20-nand.txt           |  64 -------------
>  MAINTAINERS                                        |   2 +-
>  3 files changed, 103 insertions(+), 65 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH v5] dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema

[Miquel Raynal]

On Sun, 04 Jan 2026 11:23:04 +0000, Charan Pedumuru wrote:
> Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
> Changes during Conversion:
> - Define new properties `power-domains` and `operating-points-v2`
>   because the existing in tree DTS uses them.
> - Modify MAINTAINERS references to point the created YAML file.
> 
> 
> [...]

Applied to mtd/next, thanks!

[1/1] dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema
      commit: 9986a70db37627cbe92fba288c2efcde25ad5c6d

Patche(s) should be available on mtd/linux.git and will be
part of the next PR (provided that no robot complains by then).

Kind regards,
Miquèl