[PATCH v1 1/3] clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs

[Martin Blumenstingl <martin.blumenstingl@googlemail.com>]

GXBB has the HDMI PLL OD in the HHI_HDMI_PLL_CNTL2 register while for
GXL/GXM the OD has moved to HHI_HDMI_PLL_CNTL3. At first glance the rest
of the OD setup seems identical.

However, looking at the downstream kernel sources as well as testing
shows that GXL only supports three OD values:
- register value 0 means: divide by 1
- register value 1 means: divide by 2
- register value 2 means: divide by 4

Using register value 3 (which on GXBB means: divide by 8) still divides
by 4 as verified using meson-clk-measure. Downstream sources are also
only using OD register values 0, 1 and 2 for GXL (while for GXBB the
downstream kernel sources are also using value 3).

Add clk_div_table and have it replace the CLK_DIVIDER_POWER_OF_TWO flag
to make the kernel's view of this register match with how the hardware
actually works.

Fixes: 69d92293274b ("clk: meson: add the gxl hdmi pll")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/gxbb.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 5a229c4ffae1..0788b9b1ed21 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -349,12 +349,19 @@ static struct clk_regmap gxbb_hdmi_pll = {
 	},
 };
 
+static const struct clk_div_table gxl_hdmi_pll_od_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ /* sentinel */ }
+};
+
 static struct clk_regmap gxl_hdmi_pll_od = {
 	.data = &(struct clk_regmap_div_data){
 		.offset = HHI_HDMI_PLL_CNTL + 8,
 		.shift = 21,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = gxl_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll_od",
@@ -372,7 +379,7 @@ static struct clk_regmap gxl_hdmi_pll_od2 = {
 		.offset = HHI_HDMI_PLL_CNTL + 8,
 		.shift = 23,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = gxl_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll_od2",
@@ -390,7 +397,7 @@ static struct clk_regmap gxl_hdmi_pll = {
 		.offset = HHI_HDMI_PLL_CNTL + 8,
 		.shift = 19,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = gxl_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll",
-- 
2.52.0