* [PATCH] regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller
@ 2026-01-07 21:36 Marek Vasut
2026-01-13 19:24 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Marek Vasut @ 2026-01-07 21:36 UTC (permalink / raw)
To: devicetree
Cc: Marek Vasut, Broadcom internal kernel review list, Conor Dooley,
Florian Fainelli, Krzysztof Kozlowski, Liam Girdwood, Mark Brown,
Rob Herring, linux-arm-kernel, linux-kernel, linux-rpi-kernel
Mark the Raspberry Pi 7" Display 1 ATTINY based regulator
as GPIO controller, because the hardware behaves that way
in addition to being a regulator. Add fixed gpio-cells as
well.
Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
---
.../raspberrypi,7inch-touchscreen-panel-regulator.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 41678400e63fa..6c23f18a32c6c 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -24,6 +24,11 @@ properties:
reg:
maxItems: 1
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
additionalProperties: false
required:
--
2.51.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller
2026-01-07 21:36 [PATCH] regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller Marek Vasut
@ 2026-01-13 19:24 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2026-01-13 19:24 UTC (permalink / raw)
To: devicetree, Marek Vasut
Cc: Broadcom internal kernel review list, Conor Dooley,
Florian Fainelli, Krzysztof Kozlowski, Liam Girdwood,
Rob Herring, linux-arm-kernel, linux-kernel, linux-rpi-kernel
On Wed, 07 Jan 2026 22:36:25 +0100, Marek Vasut wrote:
> Mark the Raspberry Pi 7" Display 1 ATTINY based regulator
> as GPIO controller, because the hardware behaves that way
> in addition to being a regulator. Add fixed gpio-cells as
> well.
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller
commit: 62b04225e99a5d1c71c5c73d2aa6618bc2c0738f
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-01-13 19:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-07 21:36 [PATCH] regulator: dt-bindings: rpi-panel: Mark 7" Raspberry Pi as GPIO controller Marek Vasut
2026-01-13 19:24 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®