mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] gfs2: Fix use-after-free in iomap inline data write path
@ 2026-01-30  9:21 Deepanshu Kartikey
  2026-01-30 11:33 ` Andreas Gruenbacher
  0 siblings, 1 reply; 3+ messages in thread
From: Deepanshu Kartikey @ 2026-01-30  9:21 UTC (permalink / raw)
  To: agruenba
  Cc: gfs2, linux-kernel, Deepanshu Kartikey, syzbot+ea1cd4aa4d1e98458a55

The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath(), while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.

The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
   metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
   to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory

Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.

Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.

Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
---
 fs/gfs2/bmap.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 131091520de6..e70095809e4a 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -887,6 +887,8 @@ static int __gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
 			      sizeof(struct gfs2_dinode);
 		iomap->type = IOMAP_INLINE;
 		iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode);
+		iomap->private = dibh;
+		get_bh(dibh);
 		goto out;
 	}
 
@@ -1144,6 +1146,12 @@ static int gfs2_iomap_end(struct inode *inode, loff_t pos, loff_t length,
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
 
+	/* Release buffer head for inline data */
+	if (iomap->type == IOMAP_INLINE && iomap->private) {
+		brelse(iomap->private);
+		iomap->private = NULL;
+	}
+
 	switch (flags & (IOMAP_WRITE | IOMAP_ZERO)) {
 	case IOMAP_WRITE:
 		if (flags & IOMAP_DIRECT)
-- 
2.43.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] gfs2: Fix use-after-free in iomap inline data write path
  2026-01-30  9:21 [PATCH] gfs2: Fix use-after-free in iomap inline data write path Deepanshu Kartikey
@ 2026-01-30 11:33 ` Andreas Gruenbacher
  2026-01-30 12:01   ` Andreas Gruenbacher
  0 siblings, 1 reply; 3+ messages in thread
From: Andreas Gruenbacher @ 2026-01-30 11:33 UTC (permalink / raw)
  To: Deepanshu Kartikey; +Cc: gfs2, linux-kernel, syzbot+ea1cd4aa4d1e98458a55

Hello Deepanshu,

On Fri, Jan 30, 2026 at 10:21 AM Deepanshu Kartikey
<kartikey406@gmail.com> wrote:
> The inline data buffer head (dibh) is being released prematurely in
> gfs2_iomap_begin() via release_metapath(), while iomap->inline_data
> still points to dibh->b_data. This causes a use-after-free when
> iomap_write_end_inline() later attempts to write to the inline data
> area.
>
> The bug sequence:
> 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
>    metadata into dibh
> 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
> 3. Calls release_metapath() which calls brelse(dibh), dropping refcount
>    to 0
> 4. kswapd reclaims the page (~39ms later in the syzbot report)
> 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
> 6. KASAN detects use-after-free write to freed memory
>
> Fix by storing dibh in iomap->private and incrementing its refcount
> with get_bh() in gfs2_iomap_begin(). The buffer is then properly
> released in gfs2_iomap_end() after the inline write completes,
> ensuring the page stays alive for the entire iomap operation.

I agree with this analysis and fix. Some nitpicking below.

> Note: A C reproducer is not available for this issue. The fix is based
> on analysis of the KASAN report and code review showing the buffer head
> is freed before use.
>
> Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
> Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
> Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
> ---
>  fs/gfs2/bmap.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
> index 131091520de6..e70095809e4a 100644
> --- a/fs/gfs2/bmap.c
> +++ b/fs/gfs2/bmap.c
> @@ -887,6 +887,8 @@ static int __gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
>                               sizeof(struct gfs2_dinode);
>                 iomap->type = IOMAP_INLINE;
>                 iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode);
> +               iomap->private = dibh;
> +               get_bh(dibh);
>                 goto out;
>         }
>
> @@ -1144,6 +1146,12 @@ static int gfs2_iomap_end(struct inode *inode, loff_t pos, loff_t length,
>         struct gfs2_inode *ip = GFS2_I(inode);
>         struct gfs2_sbd *sdp = GFS2_SB(inode);
>
> +       /* Release buffer head for inline data */
> +       if (iomap->type == IOMAP_INLINE && iomap->private) {
> +               brelse(iomap->private);
> +               iomap->private = NULL;
> +       }

We're not using iomap->private for anything else and that field is
zeroed out automatically, so this can be simplified to:

if (iomap->private)
  brelse(iomap->private);

> +
>         switch (flags & (IOMAP_WRITE | IOMAP_ZERO)) {
>         case IOMAP_WRITE:
>                 if (flags & IOMAP_DIRECT)
> --
> 2.43.0
>

Thanks,
Andreas


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] gfs2: Fix use-after-free in iomap inline data write path
  2026-01-30 11:33 ` Andreas Gruenbacher
@ 2026-01-30 12:01   ` Andreas Gruenbacher
  0 siblings, 0 replies; 3+ messages in thread
From: Andreas Gruenbacher @ 2026-01-30 12:01 UTC (permalink / raw)
  To: Deepanshu Kartikey; +Cc: gfs2, linux-kernel, syzbot+ea1cd4aa4d1e98458a55

On Fri, Jan 30, 2026 at 12:33 PM Andreas Gruenbacher
<agruenba@redhat.com> wrote:
> Hello Deepanshu,
>
> On Fri, Jan 30, 2026 at 10:21 AM Deepanshu Kartikey
> <kartikey406@gmail.com> wrote:
> > The inline data buffer head (dibh) is being released prematurely in
> > gfs2_iomap_begin() via release_metapath(), while iomap->inline_data
> > still points to dibh->b_data. This causes a use-after-free when
> > iomap_write_end_inline() later attempts to write to the inline data
> > area.
> >
> > The bug sequence:
> > 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
> >    metadata into dibh
> > 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
> > 3. Calls release_metapath() which calls brelse(dibh), dropping refcount
> >    to 0
> > 4. kswapd reclaims the page (~39ms later in the syzbot report)
> > 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
> > 6. KASAN detects use-after-free write to freed memory
> >
> > Fix by storing dibh in iomap->private and incrementing its refcount
> > with get_bh() in gfs2_iomap_begin(). The buffer is then properly
> > released in gfs2_iomap_end() after the inline write completes,
> > ensuring the page stays alive for the entire iomap operation.
>
> I agree with this analysis and fix. Some nitpicking below.
>
> > Note: A C reproducer is not available for this issue. The fix is based
> > on analysis of the KASAN report and code review showing the buffer head
> > is freed before use.
> >
> > Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
> > Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
> > Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
> > ---
> >  fs/gfs2/bmap.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
> > index 131091520de6..e70095809e4a 100644
> > --- a/fs/gfs2/bmap.c
> > +++ b/fs/gfs2/bmap.c
> > @@ -887,6 +887,8 @@ static int __gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
> >                               sizeof(struct gfs2_dinode);
> >                 iomap->type = IOMAP_INLINE;
> >                 iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode);
> > +               iomap->private = dibh;
> > +               get_bh(dibh);
> >                 goto out;
> >         }
> >
> > @@ -1144,6 +1146,12 @@ static int gfs2_iomap_end(struct inode *inode, loff_t pos, loff_t length,
> >         struct gfs2_inode *ip = GFS2_I(inode);
> >         struct gfs2_sbd *sdp = GFS2_SB(inode);
> >
> > +       /* Release buffer head for inline data */
> > +       if (iomap->type == IOMAP_INLINE && iomap->private) {
> > +               brelse(iomap->private);
> > +               iomap->private = NULL;
> > +       }
>
> We're not using iomap->private for anything else and that field is
> zeroed out automatically, so this can be simplified to:
>
> if (iomap->private)
>   brelse(iomap->private);

And then we've also got iomap->private leaking a dibh reference in
gfs2_iomap_get() and gfs2_iomap_alloc().

> > +
> >         switch (flags & (IOMAP_WRITE | IOMAP_ZERO)) {
> >         case IOMAP_WRITE:
> >                 if (flags & IOMAP_DIRECT)
> > --
> > 2.43.0
> >
>
> Thanks,
> Andreas


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2026-01-30 12:02 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-30  9:21 [PATCH] gfs2: Fix use-after-free in iomap inline data write path Deepanshu Kartikey
2026-01-30 11:33 ` Andreas Gruenbacher
2026-01-30 12:01   ` Andreas Gruenbacher

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®