mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Cheng Ming Lin <linchengming884@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Richard Weinberger <richard@nod.at>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Martin Kurbanov <mmkurbanov@salutedevices.com>,
	Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>,
	Pratyush Yadav <pratyush@kernel.org>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	alvinzhou@mxic.com.tw, Cheng Ming Lin <chengminglin@mxic.com.tw>
Subject: [PATCH v4 1/2] mtd: spi-nand: Add support for randomizer
Date: Tue,  3 Feb 2026 10:13:57 +0800	[thread overview]
Message-ID: <20260203021358.693291-2-linchengming884@gmail.com> (raw)
In-Reply-To: <20260203021358.693291-1-linchengming884@gmail.com>

From: Cheng Ming Lin <chengminglin@mxic.com.tw>

This patch adds support for the randomizer feature.

It introduces a 'set_randomizer' callback in 'struct spinand_info' and
'struct spinand_device'.

If a driver implements this callback, the core will call it during
device initialization (spinand_init) to enable the randomizer.

Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
---
 drivers/mtd/nand/spi/core.c | 23 +++++++++++++++++++++++
 include/linux/mtd/spinand.h |  9 +++++++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index d207286572d8..4f8ff94f5ccc 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -206,6 +206,12 @@ static int spinand_cont_read_enable(struct spinand_device *spinand,
 	return spinand->set_cont_read(spinand, enable);
 }
 
+static int spinand_randomizer_enable(struct spinand_device *spinand,
+				     bool enable)
+{
+	return spinand->set_randomizer(spinand, enable);
+}
+
 static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
@@ -1218,6 +1224,19 @@ static int spinand_create_dirmaps(struct spinand_device *spinand)
 	return 0;
 }
 
+static int spinand_randomizer_init(struct spinand_device *spinand)
+{
+	int ret;
+
+	if (spinand->set_randomizer) {
+		ret = spinand_randomizer_enable(spinand, true);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct nand_ops spinand_ops = {
 	.erase = spinand_erase,
 	.markbad = spinand_markbad,
@@ -1412,6 +1431,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
 		spinand->user_otp = &table[i].user_otp;
 		spinand->read_retries = table[i].read_retries;
 		spinand->set_read_retry = table[i].set_read_retry;
+		spinand->set_randomizer = table[i].set_randomizer;
 
 		op = spinand_select_op_variant(spinand,
 					       info->op_variants.read_cache);
@@ -1588,6 +1608,9 @@ static int spinand_init(struct spinand_device *spinand)
 	 * ECC initialization must have happened previously.
 	 */
 	spinand_cont_read_init(spinand);
+	ret = spinand_randomizer_init(spinand);
+	if (ret)
+		goto err_cleanup_nanddev;
 
 	mtd->_read_oob = spinand_mtd_read;
 	mtd->_write_oob = spinand_mtd_write;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index ce76f5c632e1..e01315a71222 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -501,6 +501,7 @@ struct spinand_user_otp {
  * @user_otp: SPI NAND user OTP info.
  * @read_retries: the number of read retry modes supported
  * @set_read_retry: enable/disable read retry for data recovery
+ * @set_randomizer: enable/disable randomizer support
  *
  * Each SPI NAND manufacturer driver should have a spinand_info table
  * describing all the chips supported by the driver.
@@ -527,6 +528,8 @@ struct spinand_info {
 	unsigned int read_retries;
 	int (*set_read_retry)(struct spinand_device *spinand,
 			     unsigned int read_retry);
+	int (*set_randomizer)(struct spinand_device *spinand,
+			      bool enable);
 };
 
 #define SPINAND_ID(__method, ...)					\
@@ -580,6 +583,9 @@ struct spinand_info {
 	.read_retries = __read_retries,					\
 	.set_read_retry = __set_read_retry
 
+#define SPINAND_RANDOMIZER(__set_randomizer)				\
+	.set_randomizer = __set_randomizer
+
 #define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants,	\
 		     __flags, ...)					\
 	{								\
@@ -635,6 +641,7 @@ struct spinand_dirmap {
  * @user_otp: SPI NAND user OTP info.
  * @read_retries: the number of read retry modes supported
  * @set_read_retry: Enable/disable the read retry feature
+ * @set_randomizer: Enable/disable the randomizer feature
  */
 struct spinand_device {
 	struct nand_device base;
@@ -668,6 +675,8 @@ struct spinand_device {
 	bool cont_read_possible;
 	int (*set_cont_read)(struct spinand_device *spinand,
 			     bool enable);
+	int (*set_randomizer)(struct spinand_device *spinand,
+			      bool enable);
 
 	const struct spinand_fact_otp *fact_otp;
 	const struct spinand_user_otp *user_otp;
-- 
2.25.1


  reply	other threads:[~2026-02-03  2:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-03  2:13 [PATCH v4 0/2] mtd: spi-nand: Add support for randomizer feature Cheng Ming Lin
2026-02-03  2:13 ` Cheng Ming Lin [this message]
2026-02-03 14:40   ` [PATCH v4 1/2] mtd: spi-nand: Add support for randomizer Miquel Raynal
2026-02-04  1:47     ` Cheng Ming Lin
2026-02-04  8:33       ` Miquel Raynal
2026-02-03  2:13 ` [PATCH v4 2/2] mtd: spi-nand: macronix: Enable randomizer support Cheng Ming Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260203021358.693291-2-linchengming884@gmail.com \
    --to=linchengming884@gmail.com \
    --cc=alvinzhou@mxic.com.tw \
    --cc=chengminglin@mxic.com.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mikhail.kshevetskiy@iopsys.eu \
    --cc=miquel.raynal@bootlin.com \
    --cc=mmkurbanov@salutedevices.com \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®