From: Cheng Ming Lin <linchengming884@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Richard Weinberger <richard@nod.at>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Martin Kurbanov <mmkurbanov@salutedevices.com>,
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>,
Pratyush Yadav <pratyush@kernel.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
alvinzhou@mxic.com.tw, Cheng Ming Lin <chengminglin@mxic.com.tw>
Subject: [PATCH v4 2/2] mtd: spi-nand: macronix: Enable randomizer support
Date: Tue, 3 Feb 2026 10:13:58 +0800 [thread overview]
Message-ID: <20260203021358.693291-3-linchengming884@gmail.com> (raw)
In-Reply-To: <20260203021358.693291-1-linchengming884@gmail.com>
From: Cheng Ming Lin <chengminglin@mxic.com.tw>
Implement the 'set_randomizer' callback for Macronix SPI NAND chips.
This feature is controlled via the "mxic,randomizer-enable" device tree
property.
The randomizer is enabled by setting bit 1 of the Configuration Register
(address 0x10).
This patch adds support for the following chips:
- MX35LFxG24AD series
- MX35UFxG24AD series
When the randomizer is enabled, data is scrambled internally during
program operations and automatically descrambled during read operations.
This helps reduce bit errors caused by program disturbance.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
---
drivers/mtd/nand/spi/macronix.c | 47 ++++++++++++++++++++++++++-------
1 file changed, 37 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index edf63b9996cf..0212d44b1a3f 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -14,6 +14,8 @@
#define MACRONIX_ECCSR_BF_LAST_PAGE(eccsr) FIELD_GET(GENMASK(3, 0), eccsr)
#define MACRONIX_ECCSR_BF_ACCUMULATED_PAGES(eccsr) FIELD_GET(GENMASK(7, 4), eccsr)
#define MACRONIX_CFG_CONT_READ BIT(2)
+#define MACRONIX_CFG_RANDOMIZER_EN BIT(1)
+#define MACRONIX_FEATURE_ADDR_RANDOMIZER 0x10
#define MACRONIX_FEATURE_ADDR_READ_RETRY 0x70
#define MACRONIX_NUM_READ_RETRY_MODES 5
@@ -155,6 +157,21 @@ static int macronix_set_read_retry(struct spinand_device *spinand,
return spi_mem_exec_op(spinand->spimem, &op);
}
+static int macronix_set_randomizer(struct spinand_device *spinand, bool enable)
+{
+ struct device_node *np = spinand->spimem->spi->dev.of_node;
+ int ret;
+
+ if (of_property_read_bool(np, "mxic,randomizer-enable")) {
+ ret = spinand_write_reg_op(spinand, MACRONIX_FEATURE_ADDR_RANDOMIZER,
+ enable ? MACRONIX_CFG_RANDOMIZER_EN : 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct spinand_info macronix_spinand_table[] = {
SPINAND_INFO("MX35LF1GE4AB",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x12),
@@ -213,7 +230,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35LF2G24AD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24, 0x03),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
@@ -225,7 +243,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_HAS_PROG_PLANE_SELECT_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35LF2G24AD-Z4I8",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x64, 0x03),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
@@ -236,7 +255,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35LF4G24AD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x35, 0x03),
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 2, 1, 1),
@@ -248,7 +268,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_HAS_PROG_PLANE_SELECT_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35LF4G24AD-Z4I8",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x75, 0x03),
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
@@ -259,7 +280,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX31LF1GE4BC",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
@@ -305,7 +327,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
macronix_ecc_get_status),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35UF4G24AD-Z4I8",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xf5, 0x03),
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
@@ -317,7 +340,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
macronix_ecc_get_status),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35UF4GE4AD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xb7, 0x03),
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
@@ -355,7 +379,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
macronix_ecc_get_status),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35UF2G24AD-Z4I8",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xe4, 0x03),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
@@ -367,7 +392,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
macronix_ecc_get_status),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35UF2GE4AD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa6, 0x03),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
@@ -413,7 +439,8 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
macronix_ecc_get_status),
SPINAND_READ_RETRY(MACRONIX_NUM_READ_RETRY_MODES,
- macronix_set_read_retry)),
+ macronix_set_read_retry),
+ SPINAND_RANDOMIZER(macronix_set_randomizer)),
SPINAND_INFO("MX35UF1GE4AD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x96, 0x03),
NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
--
2.25.1
prev parent reply other threads:[~2026-02-03 2:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-03 2:13 [PATCH v4 0/2] mtd: spi-nand: Add support for randomizer feature Cheng Ming Lin
2026-02-03 2:13 ` [PATCH v4 1/2] mtd: spi-nand: Add support for randomizer Cheng Ming Lin
2026-02-03 14:40 ` Miquel Raynal
2026-02-04 1:47 ` Cheng Ming Lin
2026-02-04 8:33 ` Miquel Raynal
2026-02-03 2:13 ` Cheng Ming Lin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260203021358.693291-3-linchengming884@gmail.com \
--to=linchengming884@gmail.com \
--cc=alvinzhou@mxic.com.tw \
--cc=chengminglin@mxic.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mikhail.kshevetskiy@iopsys.eu \
--cc=miquel.raynal@bootlin.com \
--cc=mmkurbanov@salutedevices.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®