From: Claudio Imbrenda <imbrenda@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org,
borntraeger@de.ibm.com, frankja@linux.ibm.com, nsg@linux.ibm.com,
nrb@linux.ibm.com, seiden@linux.ibm.com, gra@linux.ibm.com,
schlameuss@linux.ibm.com, hca@linux.ibm.com, svens@linux.ibm.com,
agordeev@linux.ibm.com, gor@linux.ibm.com, david@kernel.org,
gerald.schaefer@linux.ibm.com
Subject: [PATCH v7 22/29] KVM: s390: Stop using CONFIG_PGSTE
Date: Wed, 4 Feb 2026 16:02:51 +0100 [thread overview]
Message-ID: <20260204150259.60425-23-imbrenda@linux.ibm.com> (raw)
In-Reply-To: <20260204150259.60425-1-imbrenda@linux.ibm.com>
Switch to using IS_ENABLED(CONFIG_KVM) instead of CONFIG_PGSTE, since
the latter will be removed soon.
Many CONFIG_PGSTE are left behind, because they will be removed
completely in upcoming patches. The ones replaced here are mostly the
ones that will stay.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
---
arch/s390/include/asm/mmu_context.h | 2 +-
arch/s390/include/asm/pgtable.h | 4 ++--
arch/s390/mm/fault.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index d9b8501bc93d..48e548c01daa 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -29,7 +29,7 @@ static inline int init_new_context(struct task_struct *tsk,
atomic_set(&mm->context.protected_count, 0);
mm->context.gmap_asce = 0;
mm->context.flush_mm = 0;
-#ifdef CONFIG_PGSTE
+#if IS_ENABLED(CONFIG_KVM)
mm->context.has_pgste = 0;
mm->context.uses_skeys = 0;
mm->context.uses_cmm = 0;
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 04335f5e7f47..cd4d135c4503 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -577,7 +577,7 @@ static inline int mm_has_pgste(struct mm_struct *mm)
static inline int mm_is_protected(struct mm_struct *mm)
{
-#ifdef CONFIG_PGSTE
+#if IS_ENABLED(CONFIG_KVM)
if (unlikely(atomic_read(&mm->context.protected_count)))
return 1;
#endif
@@ -632,7 +632,7 @@ static inline pud_t set_pud_bit(pud_t pud, pgprot_t prot)
#define mm_forbids_zeropage mm_forbids_zeropage
static inline int mm_forbids_zeropage(struct mm_struct *mm)
{
-#ifdef CONFIG_PGSTE
+#if IS_ENABLED(CONFIG_KVM)
if (!mm->context.allow_cow_sharing)
return 1;
#endif
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index e2e13778c36a..a52aa7a99b6b 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -403,7 +403,7 @@ void do_dat_exception(struct pt_regs *regs)
}
NOKPROBE_SYMBOL(do_dat_exception);
-#if IS_ENABLED(CONFIG_PGSTE)
+#if IS_ENABLED(CONFIG_KVM)
void do_secure_storage_access(struct pt_regs *regs)
{
@@ -470,4 +470,4 @@ void do_secure_storage_access(struct pt_regs *regs)
}
NOKPROBE_SYMBOL(do_secure_storage_access);
-#endif /* CONFIG_PGSTE */
+#endif /* CONFIG_KVM */
--
2.52.0
next prev parent reply other threads:[~2026-02-04 15:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-04 15:02 [PATCH v7 00/29] KVM: s390: gmap rewrite, the real deal Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 01/29] KVM: s390: Refactor pgste lock and unlock functions Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 02/29] KVM: s390: Add P bit in table entry bitfields, move union vaddress Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 03/29] s390: Make UV folio operations work on whole folio Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 04/29] s390: Move sske_frame() to a header Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 05/29] KVM: s390: Add gmap_helper_set_unused() Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 06/29] KVM: s390: Introduce import_lock Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 07/29] KVM: s390: Export two functions Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 08/29] s390/mm: Warn if uv_convert_from_secure_pte() fails Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 09/29] KVM: s390: vsie: Pass gmap explicitly as parameter Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 10/29] KVM: s390: Enable KVM_GENERIC_MMU_NOTIFIER Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 11/29] KVM: s390: Rename some functions in gaccess.c Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 12/29] KVM: s390: KVM-specific bitfields and helper functions Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 13/29] KVM: s390: KVM page table management functions: allocation Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 14/29] KVM: s390: KVM page table management functions: clear and replace Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 15/29] KVM: s390: KVM page table management functions: walks Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 16/29] KVM: s390: KVM page table management functions: storage keys Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 17/29] KVM: s390: KVM page table management functions: lifecycle management Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 18/29] KVM: s390: KVM page table management functions: CMMA Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 19/29] KVM: s390: New gmap code Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 20/29] KVM: s390: Add helper functions for fault handling Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 21/29] KVM: s390: Add some helper functions needed for vSIE Claudio Imbrenda
2026-02-04 15:02 ` Claudio Imbrenda [this message]
2026-02-04 15:02 ` [PATCH v7 23/29] KVM: s390: Storage key functions refactoring Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 24/29] KVM: s390: Switch to new gmap Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 25/29] KVM: s390: Remove gmap from s390/mm Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 26/29] KVM: S390: Remove PGSTE code from linux/s390 mm Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 27/29] KVM: s390: Enable 1M pages for gmap Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 28/29] KVM: s390: Storage key manipulation IOCTL Claudio Imbrenda
2026-02-04 15:02 ` [PATCH v7 29/29] KVM: s390: selftests: Add selftest for the KVM_S390_KEYOP ioctl Claudio Imbrenda
2026-02-04 15:23 ` [PATCH v7 00/29] KVM: s390: gmap rewrite, the real deal Heiko Carstens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260204150259.60425-23-imbrenda@linux.ibm.com \
--to=imbrenda@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=david@kernel.org \
--cc=frankja@linux.ibm.com \
--cc=gerald.schaefer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=gra@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=nrb@linux.ibm.com \
--cc=nsg@linux.ibm.com \
--cc=schlameuss@linux.ibm.com \
--cc=seiden@linux.ibm.com \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®