* [PATCH v2 2/2] arm64: dts: qcom: Add Xiaomi 12 Lite 5G (taoyao) DTS
2026-02-16 12:07 [PATCH v2 0/2] Add Xiaomi 12 Lite 5G (taoyao) device tree Stanislav Zaikin
2026-02-16 12:07 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add SM7325 Xiaomi 12 Lite 5G (taoyao) Stanislav Zaikin
@ 2026-02-16 12:07 ` Stanislav Zaikin
2026-02-16 12:38 ` Konrad Dybcio
1 sibling, 1 reply; 4+ messages in thread
From: Stanislav Zaikin @ 2026-02-16 12:07 UTC (permalink / raw)
To: devicetree
Cc: linux-arm-msm, andersson, konradybcio, robh, krzk+dt, conor+dt,
linux-kernel, Stanislav Zaikin
Xiaomi 12 Lite 5G is a handset released in 2022
This commit has the following features working:
- Display (with simple fb)
- Touchscreen
- UFS
- Power and volume buttons
- Pinctrl
- RPM Regulators
- Remoteprocs - wifi, bluetooth
- USB (Device Mode)
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm7325-xiaomi-taoyao.dts | 865 ++++++++++++++++++
2 files changed, 866 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7325-xiaomi-taoyao.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f34d5ed331c..61618da3f68c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -280,6 +280,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7325-xiaomi-taoyao.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7325-xiaomi-taoyao.dts b/arch/arm64/boot/dts/qcom/sm7325-xiaomi-taoyao.dts
new file mode 100644
index 000000000000..24106b487c9c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7325-xiaomi-taoyao.dts
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2025, Stanislav Zaikin <zstaseg@gmail.com>
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+#include "sm7325.dtsi"
+#include "pm7325.dtsi"
+#include "pm7250b.dtsi" /* PM7250B */
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/* The following reserved memory regions have different addresses or sizes */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+ model = "Xiaomi 12 Lite 5G";
+ compatible = "xiaomi,taoyao", "qcom,sm7325";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@e1000000 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_reserved>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_vol_up>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm7325-pmic-glink",
+ "qcom,qcm6490-pmic-glink",
+ "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_oled_dvdd: regulator-oled-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "oled_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vreg_s1b_1p856>;
+ regulator-boot-on;
+ };
+
+ /* S2B is really ebi.lvl but it's there for supply map completeness sake. */
+ vreg_s2b_0p7: regulator-smpa3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s2b_0p7";
+
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <700000>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ reserved-memory {
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@86200000 {
+ reg = <0x0 0x86200000 0x0 0x500000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86700000 {
+ reg = <0x0 0x86700000 0x0 0x4000000>;
+ no-map;
+ };
+
+ camera_mem: camera@8ad00000 {
+ reg = <0x0 0x8ad00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b710000 {
+ reg = <0x0 0x8b710000 0x0 0xa000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@9c700000 {
+ reg = <0x0 0x9c700000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ ramoops@a9000000 {
+ compatible = "ramoops";
+ reg = <0x0 0xa9000000 0x0 0x200000>;
+ pmsg-size = <0x200000>;
+ mem-type = <2>;
+ };
+
+ removed_mem: removed@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x6800000>;
+ no-map;
+ };
+
+ pil_trustedvm_mem: pil-trustedvm-region@d0800000 {
+ reg = <0x0 0xd0800000 0x0 0x76f7000>;
+ no-map;
+ };
+
+ qrtr_shmem: qrtr-shmem@d7ef7000 {
+ reg = <0x0 0xd7ef7000 0x0 0x9000>;
+ no-map;
+ };
+
+ neuron_block_0_mem: neuron-block@d7f00000 {
+ reg = <0x0 0xd7f00000 0x0 0x80000>;
+ no-map;
+ };
+
+ neuron_block_1_mem: neuron-block@d7f80000 {
+ reg = <0x0 0xd7f80000 0x0 0x80000>;
+ no-map;
+ };
+
+ framebuffer_reserved: framebuffer@e1000000 {
+ reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@ef500000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xe7d00000 0x0 0x280000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
+ <QCOM_SCM_VMID_NAV>;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-supply = <&vreg_s2b_0p7>;
+ vdd-l5-supply = <&vreg_s2b_0p7>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
+ vdd-l8-supply = <&vreg_s7b_0p952>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
+ vdd-l13-supply = <&vreg_s7b_0p952>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p256>;
+
+ /*
+ * S2, L4-L5 are ARCs:
+ * S2 - ebi.lvl,
+ * L4 - lmx.lvl,
+ * L5 - lcx.lvl.
+ *
+ * L10 are unused.
+ */
+
+ vreg_s1b_1p856: smps1 {
+ regulator-name = "vreg_s1b_1p856";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p952: smps7 {
+ regulator-name = "vreg_s7b_0p952";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p256: smps8 {
+ regulator-name = "vreg_s8b_1p256";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p6: ldo3 {
+ regulator-name = "vreg_l3b_0p6";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
+ /* Constrained for UFS VCC, at least until UFS driver scales voltage */
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p776: ldo11 {
+ regulator-name = "vreg_l11b_1p776";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p8: ldo12 {
+ regulator-name = "vreg_l12b_0p8";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p8: ldo13 {
+ regulator-name = "vreg_l13b_0p8";
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p2: ldo14 {
+ regulator-name = "vreg_l14b_1p2";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p88: ldo15 {
+ regulator-name = "vreg_l15b_0p88";
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p2: ldo16 {
+ regulator-name = "vreg_l16b_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p8: ldo17 {
+ regulator-name = "vreg_l17b_1p8";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_s1b_1p856>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p856>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s7b_0p952>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ /*
+ * S2, S5, S7, S10 are ARCs:
+ * S2 - cx.lvl,
+ * S5 - mss.lvl,
+ * S7 - gfx.lvl,
+ * S10 - mx.lvl.
+ */
+
+ vreg_s1c_2p2: smps1 {
+ regulator-name = "vreg_s1c_2p2";
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s9c_0p676: smps9 {
+ regulator-name = "vreg_s9c_0p676";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-name = "vreg_l2c_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_3p0: ldo3 {
+ regulator-name = "vreg_l3c_3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8_3p0: ldo4 {
+ regulator-name = "vreg_l4c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8_3p0: ldo5 {
+ regulator-name = "vreg_l5c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-name = "vreg_l12c_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_3p0: ldo13 {
+ regulator-name = "vreg_l13c_3p0";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&dispcc {
+ status = "disabled";
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/a660_zap.mbn";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ vcc-supply = <&vreg_bob>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/ipa_fws.mbn";
+
+ status = "okay";
+};
+
+&lpass_audiocc {
+ compatible = "qcom,qcm6490-lpassaudiocc";
+ /delete-property/ power-domains;
+};
+
+&pm7325_gpios {
+ key_vol_up: key-vol-up-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qup_spi13_cs {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&qup_spi13_data_clk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/cdsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/modem.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/wpss.mbn";
+
+ status = "okay";
+};
+
+&spi13 {
+ status = "okay";
+
+ touchscreen@0 {
+ compatible = "goodix,gt9916";
+ reg = <0>;
+
+ interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&vreg_l7c_3p0>;
+ vddio-supply = <&vreg_l2c_1p8>;
+
+ spi-max-frequency = <5000000>;
+
+ touchscreen-size-x = <10800>;
+ touchscreen-size-y = <24000>;
+
+ pinctrl-0 = <&ts_irq>, <&ts_reset>;
+ pinctrl-names = "default";
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <48 4>, <56 4>;
+
+ bt_uart_sleep_cts: bt-uart-sleep-cts-state {
+ pins = "gpio28";
+ function = "gpio";
+ bias-bus-hold;
+ };
+
+ bt_uart_sleep_rts: bt-uart-sleep-rts-state {
+ pins = "gpio29";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ bt_uart_sleep_txd: bt-uart-sleep-txd-state {
+ pins = "gpio30";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ bt_uart_sleep_rxd: bt-uart-sleep-rxd-state {
+ pins = "gpio31";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ sde_dsi_active: sde-dsi-active-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sde_dsi_sleep: sde-dsi-sleep-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te_active_sleep: sde-te-active-state {
+ pins = "gpio80";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_irq: ts-irq-state {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ hst_bt_en: hst-bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ };
+
+ hst_sw_ctrl: hst-sw-ctrl-state {
+ pins = "gpio86";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ ts_reset: ts-reset-state {
+ pins = "gpio105";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart7 {
+ /delete-property/interrupts;
+ interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-1 = <&bt_uart_sleep_cts>,
+ <&bt_uart_sleep_rts>,
+ <&bt_uart_sleep_txd>,
+ <&bt_uart_sleep_rxd>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6750-bt";
+
+ pinctrl-0 = <&hst_bt_en>,
+ <&hst_sw_ctrl>;
+ pinctrl-names = "default";
+
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p952>;
+ vddbtcxmx-supply = <&vreg_s7b_0p952>;
+ vddrfacmn-supply = <&vreg_s7b_0p952>;
+ vddrfa0p8-supply = <&vreg_s7b_0p952>;
+ vddrfa1p7-supply = <&vreg_s1b_1p856>;
+ vddrfa1p2-supply = <&vreg_s8b_1p256>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+
+ qcom,local-bd-address-broken;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7b_2p96>;
+ vcc-max-microamp = <800000>;
+ /*
+ * Technically l9b enables an eLDO (supplied by s1b) which then powers
+ * VCCQ2 of the UFS.
+ */
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ /* USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+
+ dr_mode = "otg";
+ usb-role-switch;
+ maximum-speed = "high-speed";
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sm7325/xiaomi/taoyao/vpu20_1v.mbn";
+
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+};
--
2.51.0
^ permalink raw reply [flat|nested] 4+ messages in thread