[PATCH v2 3/7] nvmem: check the return value of gpiod_set_value_cansleep()

[Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>]

GPIO setters now return integer values and can indicate failures in
lower abstraction layers. Check the return values of
gpiod_set_value_cansleep() calls in nvmem core.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/nvmem/core.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 14f583e466c8d95690539bd886fd0c2fdd440998..924e2e247ac1ad426d73310f1024000ca64e0471 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -64,16 +64,22 @@ static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
 static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
 			     void *val, size_t bytes)
 {
-	int ret;
+	int ret, written;
 
 	if (!nvmem->reg_write)
 		return -EOPNOTSUPP;
 
-	gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
-	ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
-	gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+	if (ret)
+		return ret;
 
-	return ret;
+	written = nvmem->reg_write(nvmem->priv, offset, val, bytes);
+
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+	if (ret)
+		return ret;
+
+	return written;
 }
 
 static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,

-- 
2.47.3