From: Wei Deng <wei.deng@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Marcel Holtmann <marcel@holtmann.org>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-pm@vger.kernel.org, cheng.jiang@oss.qualcomm.com,
shuai.zhang@oss.qualcomm.com
Subject: [PATCH V3] arm64: dts: qcom: qcs8300-ride: Enable Bluetooth support
Date: Wed, 25 Feb 2026 14:47:00 +0530 [thread overview]
Message-ID: <20260225091700.286108-1-wei.deng@oss.qualcomm.com> (raw)
Enable BT on qcs8300-ride by adding a BT device tree node.
Since the platform uses the QCA6698 Bluetooth chip. While
the QCA6698 shares the same IP core as the WCN6855, it has
different RF components and RAM sizes, requiring new firmware
files. Use the firmware-name property to specify the NVM and
rampatch firmware to load.
Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
---
This patch depends on:
- WLAN
https://lore.kernel.org/all/20260122053624.4068718-1-wei.zhang@oss.qualcomm.com/
Changes in v3:
- Rebase patches
- Remove unintended 'output-low' from bt-en-state pinctrl
- Use prerequisite-message-id to replace prerequisite-patch-id (Konrad)
- Link to v2: https://lore.kernel.org/all/20251118140406.1551669-2-wei.deng@oss.qualcomm.com/
Changes for v2
- Update commit message, add firmware name detail
- Reorganize patchset
- Link to v1: https://lore.kernel.org/all/20251113130942.2661069-1-wei.deng@oss.qualcomm.com/
---
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 26 +++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 2ede6efd1afd..03c01ae630b4 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -18,6 +18,7 @@ / {
aliases {
serial0 = &uart7;
mmc0 = &sdhc_1;
+ serial1 = &uart2;
};
chosen {
@@ -107,6 +108,7 @@ wcn6855-pmu {
vddpcie1p3-supply = <&vreg_conn_1p35>;
vddpcie1p9-supply = <&vreg_conn_1p95>;
+ bt-enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
wlan-enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
regulators {
@@ -559,6 +561,12 @@ &sdhc_1 {
};
&tlmm {
+ bt_en_state: bt-en-state {
+ pins = "gpio55";
+ function = "gpio";
+ bias-pull-down;
+ };
+
pcie0_default_state: pcie0-default-state {
wake-pins {
pins = "gpio0";
@@ -633,6 +641,24 @@ wlan_en_state: wlan-en-state {
};
};
+&uart2 {
+ status = "okay";
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6855-bt";
+ firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+ max-speed = <3200000>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
&uart7 {
status = "okay";
};
base-commit: 7dff99b354601dd01829e1511711846e04340a69
prerequisite-message-id: 20260122053624.4068718-1-wei.zhang@oss.qualcomm.com
--
2.25.1
next reply other threads:[~2026-02-25 9:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 9:17 Wei Deng [this message]
2026-02-25 12:27 ` Konrad Dybcio
2026-02-26 9:14 ` Wei Deng
2026-02-26 12:15 ` Konrad Dybcio
2026-03-02 2:34 ` Wei Deng
2026-02-26 2:27 ` Dmitry Baryshkov
2026-02-26 9:17 ` Wei Deng
2026-02-26 9:18 ` Krzysztof Kozlowski
2026-02-26 9:32 ` Wei Deng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225091700.286108-1-wei.deng@oss.qualcomm.com \
--to=wei.deng@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=cheng.jiang@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=robh@kernel.org \
--cc=shuai.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®