[PATCH v2 03/11] dt-bindings: power: supply: max17042: drop formatting specifier |

["André Draszik" <andre.draszik@linaro.org>]

| denotes a literal (preformatted) block and is not necessary here.

Drop them from this file.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 .../devicetree/bindings/power/supply/maxim,max17042.yaml     | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 25ea8e19b980..242b33f2bcba 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -28,7 +28,7 @@ properties:
 
   interrupts:
     maxItems: 1
-    description: |
+    description:
       The ALRT pin (or FG_INTB pin on MAX77759), an open-drain interrupt.
 
   shunt-resistor-micro-ohms:
@@ -39,31 +39,31 @@ properties:
   maxim,rsns-microohm:
     deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description:
       Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
       Defining this property enables current-sense functionality.
 
   maxim,cold-temp:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description:
       Temperature threshold to report battery as cold (in tenths of degree Celsius).
       Default is not to report cold events.
 
   maxim,over-heat-temp:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description:
       Temperature threshold to report battery as over heated (in tenths of degree Celsius).
       Default is not to report over heating events.
 
   maxim,dead-volt:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description:
       Voltage threshold to report battery as dead (in mV).
       Default is not to report dead battery events.
 
   maxim,over-volt:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description:
       Voltage threshold to report battery as over voltage (in mV).
       Default is not to report over-voltage events.
 

-- 
2.53.0.473.g4a7958ca14-goog