[PATCH v2 05/11] power: supply: max17042: use dev_err_probe() where appropriate

["André Draszik" <andre.draszik@linaro.org>]

dev_err_probe() exists to simplify code, harmonise error messages, and
set the deferred probe reason if relevant - there's no reason not to
use it here.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/power/supply/max17042_battery.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 07759d4fdc37..b9277f81a25d 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1053,16 +1053,14 @@ static int max17042_probe(struct i2c_client *client, struct device *dev, int irq
 	chip->dev = dev;
 	chip->chip_type = chip_type;
 	chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
-	if (IS_ERR(chip->regmap)) {
-		dev_err(dev, "Failed to initialize regmap\n");
-		return -EINVAL;
-	}
+	if (IS_ERR(chip->regmap))
+		return dev_err_probe(dev, PTR_ERR(chip->regmap),
+				     "Failed to initialize regmap\n");
 
 	chip->pdata = max17042_get_pdata(chip);
-	if (!chip->pdata) {
-		dev_err(dev, "no platform data provided\n");
-		return -EINVAL;
-	}
+	if (!chip->pdata)
+		return dev_err_probe(dev, -EINVAL,
+				     "no platform data provided\n");
 
 	dev_set_drvdata(dev, chip);
 	psy_cfg.drv_data = chip;
@@ -1090,10 +1088,9 @@ static int max17042_probe(struct i2c_client *client, struct device *dev, int irq
 
 	chip->battery = devm_power_supply_register(dev, max17042_desc,
 						   &psy_cfg);
-	if (IS_ERR(chip->battery)) {
-		dev_err(dev, "failed: power supply register\n");
-		return PTR_ERR(chip->battery);
-	}
+	if (IS_ERR(chip->battery))
+		return dev_err_probe(dev, PTR_ERR(chip->battery),
+				     "failed: power supply register\n");
 
 	if (irq) {
 		unsigned int flags = IRQF_ONESHOT | IRQF_SHARED | IRQF_PROBE_SHARED;

-- 
2.53.0.473.g4a7958ca14-goog