From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 07/12] iio: frequency: adf4377: add dev variable
Date: Fri, 27 Feb 2026 16:01:36 +0200 [thread overview]
Message-ID: <20260227140152.77529-8-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20260227140152.77529-1-antoniu.miclaus@analog.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
drivers/iio/frequency/adf4377.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/iio/frequency/adf4377.c b/drivers/iio/frequency/adf4377.c
index fa686f785fa4..c2ae6f2012ce 100644
--- a/drivers/iio/frequency/adf4377.c
+++ b/drivers/iio/frequency/adf4377.c
@@ -882,35 +882,35 @@ static const struct iio_chan_spec adf4377_channels[] = {
static int adf4377_properties_parse(struct adf4377_state *st)
{
- struct spi_device *spi = st->spi;
+ struct device *dev = &st->spi->dev;
int ret;
- st->clkin = devm_clk_get_enabled(&spi->dev, "ref_in");
+ st->clkin = devm_clk_get_enabled(dev, "ref_in");
if (IS_ERR(st->clkin))
- return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+ return dev_err_probe(dev, PTR_ERR(st->clkin),
"failed to get the reference input clock\n");
- st->gpio_ce = devm_gpiod_get_optional(&st->spi->dev, "chip-enable",
+ st->gpio_ce = devm_gpiod_get_optional(dev, "chip-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_ce))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_ce),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_ce),
"failed to get the CE GPIO\n");
- st->gpio_enclk1 = devm_gpiod_get_optional(&st->spi->dev, "clk1-enable",
+ st->gpio_enclk1 = devm_gpiod_get_optional(dev, "clk1-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_enclk1))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk1),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_enclk1),
"failed to get the CE GPIO\n");
if (st->chip_info->has_gpio_enclk2) {
- st->gpio_enclk2 = devm_gpiod_get_optional(&st->spi->dev, "clk2-enable",
+ st->gpio_enclk2 = devm_gpiod_get_optional(dev, "clk2-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_enclk2))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_enclk2),
"failed to get the CE GPIO\n");
}
- ret = device_property_match_property_string(&spi->dev, "adi,muxout-select",
+ ret = device_property_match_property_string(dev, "adi,muxout-select",
adf4377_muxout_modes,
ARRAY_SIZE(adf4377_muxout_modes));
if (ret >= 0)
@@ -1055,9 +1055,10 @@ static int adf4377_probe(struct spi_device *spi)
struct iio_dev *indio_dev;
struct regmap *regmap;
struct adf4377_state *st;
+ struct device *dev = &spi->dev;
int ret;
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
@@ -1080,7 +1081,7 @@ static int adf4377_probe(struct spi_device *spi)
return ret;
st->nb.notifier_call = adf4377_freq_change;
- ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
+ ret = devm_clk_notifier_register(dev, st->clkin, &st->nb);
if (ret)
return ret;
@@ -1097,7 +1098,7 @@ static int adf4377_probe(struct spi_device *spi)
indio_dev->num_channels = ARRAY_SIZE(adf4377_channels);
}
- return devm_iio_device_register(&spi->dev, indio_dev);
+ return devm_iio_device_register(dev, indio_dev);
}
static const struct spi_device_id adf4377_id[] = {
--
2.43.0
next prev parent reply other threads:[~2026-02-27 14:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-27 14:01 [PATCH v4 00/12] iio: use dev_err_probe in probe path for ADI drivers Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 01/12] iio: frequency: adrf6780: add dev variable Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 02/12] iio: frequency: adrf6780: use dev_err_probe Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 03/12] iio: frequency: admv1014: add dev variable Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 04/12] iio: frequency: admv1014: use dev_err_probe Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 05/12] iio: frequency: admv1013: add dev variable Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 06/12] iio: frequency: admv1013: use dev_err_probe Antoniu Miclaus
2026-02-27 14:01 ` Antoniu Miclaus [this message]
2026-02-27 14:01 ` [PATCH v4 08/12] iio: frequency: adf4377: " Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 09/12] iio: dac: ad7293: add dev variable Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 10/12] iio: dac: ad7293: use dev_err_probe Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 11/12] iio: filter: admv8818: add dev variable Antoniu Miclaus
2026-02-27 14:01 ` [PATCH v4 12/12] iio: filter: admv8818: use dev_err_probe Antoniu Miclaus
2026-02-27 15:03 ` [PATCH v4 00/12] iio: use dev_err_probe in probe path for ADI drivers Andy Shevchenko
2026-02-28 11:37 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260227140152.77529-8-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®