[PATCH v2 1/3] arm64: dts: qcom: monaco-evk: Enable GPIO expander interrupt for Monaco EVK

[Swati Agarwal <swati.agarwal@oss.qualcomm.com>]

Enable PCA9538 expander as interrupt controller on Monaco EVK and configure
the corresponding TLMM pins via pinctrl to operate as GPIO inputs with
internal pull-ups.

Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco-evk.dts | 77 +++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
index 565418b86b2a..03af9bbcacc9 100644
--- a/arch/arm64/boot/dts/qcom/monaco-evk.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -362,6 +362,11 @@ expander0: gpio@38 {
 		reg = <0x38>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander0_int>;
+		pinctrl-names = "default";
 	};
 
 	expander1: gpio@39 {
@@ -369,6 +374,11 @@ expander1: gpio@39 {
 		reg = <0x39>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander1_int>;
+		pinctrl-names = "default";
 	};
 
 	expander2: gpio@3a {
@@ -376,6 +386,11 @@ expander2: gpio@3a {
 		reg = <0x3a>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander2_int>;
+		pinctrl-names = "default";
 	};
 
 	expander3: gpio@3b {
@@ -383,6 +398,11 @@ expander3: gpio@3b {
 		reg = <0x3b>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander3_int>;
+		pinctrl-names = "default";
 	};
 
 	expander4: gpio@3c {
@@ -390,6 +410,11 @@ expander4: gpio@3c {
 		reg = <0x3c>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander4_int>;
+		pinctrl-names = "default";
 	};
 
 	expander5: gpio@3d {
@@ -397,6 +422,11 @@ expander5: gpio@3d {
 		reg = <0x3d>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander5_int>;
+		pinctrl-names = "default";
 	};
 
 	expander6: gpio@3e {
@@ -404,6 +434,11 @@ expander6: gpio@3e {
 		reg = <0x3e>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&expander6_int>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -495,6 +530,48 @@ tpm@0 {
 
 &tlmm {
 
+	expander0_int: expander0-int-state {
+		pins = "gpio56";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander1_int: expander1-int-state {
+		pins = "gpio16";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander2_int: expander2-int-state {
+		pins = "gpio95";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander3_int: expander3-int-state {
+		pins = "gpio24";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander4_int: expander4-int-state {
+		pins = "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander5_int: expander5-int-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	expander6_int:  expander6-int-state {
+		pins = "gpio52";
+		function = "gpio";
+		bias-pull-up;
+	};
+
 	pcie0_default_state: pcie0-default-state {
 		wake-pins {
 			pins = "gpio0";
-- 
2.34.1