Re: [PATCH 2/2] drm: renesas: rzg2l_mipi_dsi: Fix the power-on sequence

[Hugo Villeneuve <hugo@hugovil.com>]

Hi Biju,

On Tue, 17 Mar 2026 15:45:29 +0000
Biju Das <biju.das.jz@bp.renesas.com> wrote:

> Hi Hugo,
> 
> > -----Original Message-----
> > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf Of Hugo Villeneuve
> > Sent: 17 March 2026 15:21
> > Subject: Re: [PATCH 2/2] drm: renesas: rzg2l_mipi_dsi: Fix the power-on sequence
> > 
> > Hi Biju,
> > 
> > On Tue, 17 Mar 2026 15:13:07 +0000
> > Biju Das <biju.das.jz@bp.renesas.com> wrote:
> > 
> > > Hi Hugo,
> > >
> > > Thanks for the feedback.
> > >
> > > > -----Original Message-----
> > > > From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf
> > > > Of Hugo Villeneuve
> > > > Sent: 17 March 2026 15:01
> > > > Subject: Re: [PATCH 2/2] drm: renesas: rzg2l_mipi_dsi: Fix the
> > > > power-on sequence
> > > >
> > > > Hi Biju,
> > > >
> > > > On Tue, 17 Mar 2026 12:36:01 +0000
> > > > Biju <biju.das.au@gmail.com> wrote:
> > > >
> > > > > From: Biju Das <biju.das.jz@bp.renesas.com>
> > > > >
> > > > > Move reset_control_deassert() and reset_control_assert() from
> > > > > rzg2l_mipi_dsi_dphy_init()/rzg2l_mipi_dsi_dphy_exit() to
> > > > > atomic_pre_enable() and atomic_post_disable() respectively, and
> > > > > move
> > > > > rzg2l_mipi_dsi_set_display_timing() from atomic_pre_enable() to
> > > > > atomic_enable(), to align with the power-on sequence described in
> > > > > Figure 34.5 of section "34.4.2.1 Reset" of the RZ/G2L hardware
> > > > > manual
> > > > > Rev.1.50 May 2025.
> > > > >
> > > > > According to the hardware manual, LINK registers must be written
> > > > > before deasserting CMN_RSTB, and the 1ms delay is retained in
> > > > > atomic_pre_enable() after the deassert.
> > > > >
> > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > >
> > > > Seems to me like this should be backported to stable branches (missing Fixes / Cc: stable tags)?
> > >
> > > OK, will add fixes/stable tags.
> > >
> > > >
> > > >
> > > > > ---
> > > > >  .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 27 +++++++++++--------
> > > > >  1 file changed, 16 insertions(+), 11 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > > > index e53b48e4de56..9053ce037b75 100644
> > > > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > > > @@ -484,7 +484,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
> > > > >  	u32 dphytim1;
> > > > >  	u32 dphytim2;
> > > > >  	u32 dphytim3;
> > > > > -	int ret;
> > > > >
> > > > >  	/* All DSI global operation timings are set with recommended setting */
> > > > >  	for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i)
> > > > > { @@
> > > > > -524,12 +523,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
> > > > >  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM2, dphytim2);
> > > > >  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM3, dphytim3);
> > > > >
> > > > > -	ret = reset_control_deassert(dsi->rstc);
> > > > > -	if (ret < 0)
> > > > > -		return ret;
> > > > > -
> > > > > -	fsleep(1000);
> > > > > -
> > > > >  	return 0;
> > > > >  }
> > > > >
> > > > > @@ -541,8 +534,6 @@ static void rzg2l_mipi_dsi_dphy_exit(struct
> > > > > rzg2l_mipi_dsi *dsi)
> > > > >
> > > > >  	dphyctrl0 &= ~(DSIDPHYCTRL0_EN_LDO1200 | DSIDPHYCTRL0_EN_BGR);
> > > > >  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
> > > > > -
> > > > > -	reset_control_assert(dsi->rstc);
> > > > >  }
> > > > >
> > > > >  static int rzg2l_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi,
> > > > > unsigned long mode_freq, @@ -1030,24 +1021,37 @@ static void
> > > > > rzg2l_mipi_dsi_atomic_pre_enable(struct
> > > > drm_bridge *bridge,
> > > > >  	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
> > > > >  	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
> > > > >  	mode = &drm_atomic_get_new_crtc_state(state,
> > > > > crtc)->adjusted_mode;
> > > > > -
> > > >
> > > > This is not related to your commit message (coding style change).
> > >
> > > Ack. Will restore it.
> > >
> > > >
> > > >
> > > > >  	ret = rzg2l_mipi_dsi_startup(dsi, mode);
> > > > >  	if (ret < 0)
> > > > >  		return;
> > > > >
> > > > > -	rzg2l_mipi_dsi_set_display_timing(dsi, mode);
> > > > > +	ret = reset_control_deassert(dsi->rstc);
> > > > > +	if (ret < 0)
> > > > > +		return;
> > > > > +
> > > > > +	if (dsi->rstc)
> > > >
> > > > This seems new and not documented in the commit message? Is this a fix?
> > >
> > > RZ/V2H does not need this as it uses different IP. Previously fsleep()
> > > is in RZ/G2L specific function. I will update commit description for this change.
> > 
> > Suggestion: maybe move this to a separate patch, to facilitate review/understanding...
> 
> The only way is to introduce a new callback to handle it for RZ/G2L SoC.
> Then we won't be able to apply fixes tag as it is not fixing anything.

I am not sure what you mean by that callback? How a callback is needed
only if you split the patch?

In this original patch you test for the validity of dsi->rstc to
determine if you apply the delay or not. So in the case of RZ/V2H, I
understand that it is NULL?

> Currently this is optional reset, and it is no-op for RZ/V2H.

Does this means that the call to reset_control_deassert(dsi->rstc)
should not occur for RZ/V2H?

 
> What do you think? 
> 
> Patch #1) 1 us-> 1ms  
> Patch #2) Introduce SoC specific callback to handle reset_deassert followed by delay
> Patch #3) Move the code as per this patch  
> 
> Or
> 
> Patch #1) 1 us-> 1ms
> Patch #2) Use this patch as it is, with updated commit description
> So that fixes tag can be applied
> 
> Cheers,
> Biju
> 


-- 
Hugo Villeneuve <hugo@hugovil.com>