[PATCH v2 2/2] platform/x86: barco-p50-gpio: convert to guard() notation

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

Using guard notation simplifies control flow and makes the code clearer.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/platform/x86/barco-p50-gpio.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/barco-p50-gpio.c b/drivers/platform/x86/barco-p50-gpio.c
index 360ffd8505d6..2a6d8607c402 100644
--- a/drivers/platform/x86/barco-p50-gpio.c
+++ b/drivers/platform/x86/barco-p50-gpio.c
@@ -272,33 +272,27 @@ static int p50_gpio_get(struct gpio_chip *gc, unsigned int offset)
 	struct p50_gpio *p50 = gpiochip_get_data(gc);
 	int ret;
 
-	mutex_lock(&p50->lock);
+	guard(mutex)(&p50->lock);
 
 	ret = p50_send_mbox_cmd(p50, P50_MBOX_CMD_READ_GPIO, gpio_params[offset], 0);
-	if (ret == 0) {
-		ret = p50_read_mbox_reg(p50, P50_MBOX_REG_DATA);
-		if (ret >= 0)
-			ret = !!ret;
-	}
+	if (ret < 0)
+		return ret;
 
-	mutex_unlock(&p50->lock);
+	ret = p50_read_mbox_reg(p50, P50_MBOX_REG_DATA);
+	if (ret < 0)
+		return ret;
 
-	return ret;
+	return !!ret;
 }
 
 static int p50_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 {
 	struct p50_gpio *p50 = gpiochip_get_data(gc);
-	int ret;
-
-	mutex_lock(&p50->lock);
 
-	ret = p50_send_mbox_cmd(p50, P50_MBOX_CMD_WRITE_GPIO,
-				gpio_params[offset], value);
+	guard(mutex)(&p50->lock);
 
-	mutex_unlock(&p50->lock);
-
-	return ret;
+	return p50_send_mbox_cmd(p50, P50_MBOX_CMD_WRITE_GPIO,
+				 gpio_params[offset], value);
 }
 
 static int p50_gpio_probe(struct platform_device *pdev)

-- 
2.53.0.851.ga537e3e6e9-goog