* [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths
@ 2026-05-17 16:30 Sheetal
2026-06-05 11:53 ` Jon Hunter
2026-06-08 12:12 ` Vinod Koul
0 siblings, 2 replies; 3+ messages in thread
From: Sheetal @ 2026-05-17 16:30 UTC (permalink / raw)
To: Vinod Koul, dmaengine
Cc: Laxman Dewangan, Jon Hunter, Frank Li, Thierry Reding,
Mohan Kumar, Sameer Pujar, linux-tegra, linux-kernel, Sheetal
Add dev_err/dev_err_probe logging across failure paths to improve
debuggability of DMA errors during runtime and probe.
Use return dev_err_probe() pattern where no cleanup is required in the
probe function. On error paths that need explicit unwind, store the
dev_err_probe() return value in ret before jumping to the cleanup label.
Also convert existing dev_err calls in probe to dev_err_probe for
consistency, and use dev_err in non-probe functions.
Keep explicit runtime PM and DMA registration unwind instead of managed or
scoped cleanup. The scoped runtime PM guard releases the usage count with
pm_runtime_put(), while this probe error path needs pm_runtime_put_sync()
before pm_runtime_disable(). The OF DMA registration failure path also
needs to unregister the DMA engine before dropping the runtime PM reference.
Signed-off-by: Sheetal <sheetal@nvidia.com>
---
Changes in v7:
- Keep explicit runtime PM unwind instead of using a scoped runtime PM guard
and devm_pm_runtime_enable(), because the guard releases with
pm_runtime_put() while this path needs pm_runtime_put_sync() before
pm_runtime_disable().
- Keep manual DMA registration unwind instead of using
dmaenginem_async_device_register() so DMA unregister happens before the
runtime PM reference is dropped on OF DMA registration failure.
- Restore the explicit IRQ cleanup path instead of using managed IRQ disposal.
---
drivers/dma/tegra210-adma.c | 63 ++++++++++++++++++++++++++-----------
1 file changed, 44 insertions(+), 19 deletions(-)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 14e0c408ed1e..ceaee1e33e68 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -335,8 +335,16 @@ static int tegra_adma_request_alloc(struct tegra_adma_chan *tdc,
struct tegra_adma *tdma = tdc->tdma;
unsigned int sreq_index = tdc->sreq_index;
- if (tdc->sreq_reserved)
- return tdc->sreq_dir == direction ? 0 : -EINVAL;
+ if (tdc->sreq_reserved) {
+ if (tdc->sreq_dir != direction) {
+ dev_err(tdma->dev,
+ "DMA request direction mismatch: reserved=%s, requested=%s\n",
+ dmaengine_get_direction_text(tdc->sreq_dir),
+ dmaengine_get_direction_text(direction));
+ return -EINVAL;
+ }
+ return 0;
+ }
if (sreq_index > tdma->cdata->ch_req_max) {
dev_err(tdma->dev, "invalid DMA request\n");
@@ -665,8 +673,11 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
const struct tegra_adma_chip_data *cdata = tdc->tdma->cdata;
unsigned int burst_size, adma_dir, fifo_size_shift;
- if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS)
+ if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS) {
+ dev_err(tdc2dev(tdc), "invalid DMA periods %zu (max %u)\n",
+ desc->num_periods, ADMA_CH_CONFIG_MAX_BUFS);
return -EINVAL;
+ }
switch (direction) {
case DMA_MEM_TO_DEV:
@@ -1029,8 +1040,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
cdata = of_device_get_match_data(&pdev->dev);
if (!cdata) {
- dev_err(&pdev->dev, "device match data not found\n");
- return -ENODEV;
+ return dev_err_probe(&pdev->dev, -ENODEV,
+ "device match data not found\n");
}
tdma = devm_kzalloc(&pdev->dev,
@@ -1056,7 +1067,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
unsigned int ch_base_offset;
if (res_page->start < res_base->start)
- return -EINVAL;
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "invalid page/global resource order\n");
page_offset = res_page->start - res_base->start;
ch_base_offset = cdata->ch_base_offset;
if (!ch_base_offset)
@@ -1064,7 +1076,9 @@ static int tegra_adma_probe(struct platform_device *pdev)
page_no = div_u64(page_offset, ch_base_offset);
if (!page_no || page_no > INT_MAX)
- return -EINVAL;
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "invalid page number %llu\n",
+ (unsigned long long)page_no);
tdma->ch_page_no = page_no - 1;
tdma->base_addr = devm_ioremap_resource(&pdev->dev, res_base);
@@ -1079,7 +1093,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
if (IS_ERR(tdma->base_addr))
return PTR_ERR(tdma->base_addr);
} else {
- return -ENODEV;
+ return dev_err_probe(&pdev->dev, -ENODEV,
+ "failed to get memory resource\n");
}
tdma->ch_base_addr = tdma->base_addr + cdata->ch_base_offset;
@@ -1087,8 +1102,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
tdma->ahub_clk = devm_clk_get(&pdev->dev, "d_audio");
if (IS_ERR(tdma->ahub_clk)) {
- dev_err(&pdev->dev, "Error: Missing ahub controller clock\n");
- return PTR_ERR(tdma->ahub_clk);
+ return dev_err_probe(&pdev->dev, PTR_ERR(tdma->ahub_clk),
+ "failed to get ahub clock\n");
}
tdma->dma_chan_mask = devm_kzalloc(&pdev->dev,
@@ -1104,8 +1119,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
(u32 *)tdma->dma_chan_mask,
BITS_TO_U32(tdma->nr_channels));
if (ret < 0 && (ret != -EINVAL)) {
- dev_err(&pdev->dev, "dma-channel-mask is not complete.\n");
- return ret;
+ return dev_err_probe(&pdev->dev, ret,
+ "dma-channel-mask is not complete.\n");
}
INIT_LIST_HEAD(&tdma->dma_dev.channels);
@@ -1127,11 +1142,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
cdata->global_ch_config_base + (4 * i);
}
- tdc->irq = of_irq_get(pdev->dev.of_node, i);
- if (tdc->irq <= 0) {
- ret = tdc->irq ?: -ENXIO;
+ ret = of_irq_get(pdev->dev.of_node, i);
+ if (ret <= 0) {
+ ret = dev_err_probe(&pdev->dev, ret ?: -ENXIO,
+ "failed to get IRQ for channel %d\n", i);
goto irq_dispose;
}
+ tdc->irq = ret;
vchan_init(&tdc->vc, &tdma->dma_dev);
tdc->vc.desc_free = tegra_adma_desc_free;
@@ -1141,12 +1158,18 @@ static int tegra_adma_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_resume_and_get(&pdev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ ret = dev_err_probe(&pdev->dev, ret,
+ "runtime PM resume failed\n");
goto rpm_disable;
+ }
ret = tegra_adma_init(tdma);
- if (ret)
+ if (ret) {
+ ret = dev_err_probe(&pdev->dev, ret,
+ "failed to initialize ADMA\n");
goto rpm_put;
+ }
dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
@@ -1172,14 +1195,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
ret = dma_async_device_register(&tdma->dma_dev);
if (ret < 0) {
- dev_err(&pdev->dev, "ADMA registration failed: %d\n", ret);
+ ret = dev_err_probe(&pdev->dev, ret,
+ "ADMA registration failed\n");
goto rpm_put;
}
ret = of_dma_controller_register(pdev->dev.of_node,
tegra_dma_of_xlate, tdma);
if (ret < 0) {
- dev_err(&pdev->dev, "ADMA OF registration failed %d\n", ret);
+ ret = dev_err_probe(&pdev->dev, ret,
+ "ADMA OF registration failed\n");
goto dma_remove;
}
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths
2026-05-17 16:30 [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths Sheetal
@ 2026-06-05 11:53 ` Jon Hunter
2026-06-08 12:12 ` Vinod Koul
1 sibling, 0 replies; 3+ messages in thread
From: Jon Hunter @ 2026-06-05 11:53 UTC (permalink / raw)
To: Sheetal, Vinod Koul, dmaengine, Frank Li
Cc: Laxman Dewangan, Thierry Reding, Mohan Kumar, Sameer Pujar,
linux-tegra, linux-kernel
On 17/05/2026 17:30, Sheetal wrote:
> Add dev_err/dev_err_probe logging across failure paths to improve
> debuggability of DMA errors during runtime and probe.
>
> Use return dev_err_probe() pattern where no cleanup is required in the
> probe function. On error paths that need explicit unwind, store the
> dev_err_probe() return value in ret before jumping to the cleanup label.
> Also convert existing dev_err calls in probe to dev_err_probe for
> consistency, and use dev_err in non-probe functions.
>
> Keep explicit runtime PM and DMA registration unwind instead of managed or
> scoped cleanup. The scoped runtime PM guard releases the usage count with
> pm_runtime_put(), while this probe error path needs pm_runtime_put_sync()
> before pm_runtime_disable(). The OF DMA registration failure path also
> needs to unregister the DMA engine before dropping the runtime PM reference.
>
> Signed-off-by: Sheetal <sheetal@nvidia.com>
> ---
> Changes in v7:
> - Keep explicit runtime PM unwind instead of using a scoped runtime PM guard
> and devm_pm_runtime_enable(), because the guard releases with
> pm_runtime_put() while this path needs pm_runtime_put_sync() before
> pm_runtime_disable().
> - Keep manual DMA registration unwind instead of using
> dmaenginem_async_device_register() so DMA unregister happens before the
> runtime PM reference is dropped on OF DMA registration failure.
> - Restore the explicit IRQ cleanup path instead of using managed IRQ disposal.
>
> ---
> drivers/dma/tegra210-adma.c | 63 ++++++++++++++++++++++++++-----------
> 1 file changed, 44 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index 14e0c408ed1e..ceaee1e33e68 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -335,8 +335,16 @@ static int tegra_adma_request_alloc(struct tegra_adma_chan *tdc,
> struct tegra_adma *tdma = tdc->tdma;
> unsigned int sreq_index = tdc->sreq_index;
>
> - if (tdc->sreq_reserved)
> - return tdc->sreq_dir == direction ? 0 : -EINVAL;
> + if (tdc->sreq_reserved) {
> + if (tdc->sreq_dir != direction) {
> + dev_err(tdma->dev,
> + "DMA request direction mismatch: reserved=%s, requested=%s\n",
> + dmaengine_get_direction_text(tdc->sreq_dir),
> + dmaengine_get_direction_text(direction));
> + return -EINVAL;
> + }
> + return 0;
> + }
>
> if (sreq_index > tdma->cdata->ch_req_max) {
> dev_err(tdma->dev, "invalid DMA request\n");
> @@ -665,8 +673,11 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
> const struct tegra_adma_chip_data *cdata = tdc->tdma->cdata;
> unsigned int burst_size, adma_dir, fifo_size_shift;
>
> - if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS)
> + if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS) {
> + dev_err(tdc2dev(tdc), "invalid DMA periods %zu (max %u)\n",
> + desc->num_periods, ADMA_CH_CONFIG_MAX_BUFS);
> return -EINVAL;
> + }
>
> switch (direction) {
> case DMA_MEM_TO_DEV:
> @@ -1029,8 +1040,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
>
> cdata = of_device_get_match_data(&pdev->dev);
> if (!cdata) {
> - dev_err(&pdev->dev, "device match data not found\n");
> - return -ENODEV;
> + return dev_err_probe(&pdev->dev, -ENODEV,
> + "device match data not found\n");
> }
>
> tdma = devm_kzalloc(&pdev->dev,
> @@ -1056,7 +1067,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
> unsigned int ch_base_offset;
>
> if (res_page->start < res_base->start)
> - return -EINVAL;
> + return dev_err_probe(&pdev->dev, -EINVAL,
> + "invalid page/global resource order\n");
> page_offset = res_page->start - res_base->start;
> ch_base_offset = cdata->ch_base_offset;
> if (!ch_base_offset)
> @@ -1064,7 +1076,9 @@ static int tegra_adma_probe(struct platform_device *pdev)
>
> page_no = div_u64(page_offset, ch_base_offset);
> if (!page_no || page_no > INT_MAX)
> - return -EINVAL;
> + return dev_err_probe(&pdev->dev, -EINVAL,
> + "invalid page number %llu\n",
> + (unsigned long long)page_no);
>
> tdma->ch_page_no = page_no - 1;
> tdma->base_addr = devm_ioremap_resource(&pdev->dev, res_base);
> @@ -1079,7 +1093,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
> if (IS_ERR(tdma->base_addr))
> return PTR_ERR(tdma->base_addr);
> } else {
> - return -ENODEV;
> + return dev_err_probe(&pdev->dev, -ENODEV,
> + "failed to get memory resource\n");
> }
>
> tdma->ch_base_addr = tdma->base_addr + cdata->ch_base_offset;
> @@ -1087,8 +1102,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
>
> tdma->ahub_clk = devm_clk_get(&pdev->dev, "d_audio");
> if (IS_ERR(tdma->ahub_clk)) {
> - dev_err(&pdev->dev, "Error: Missing ahub controller clock\n");
> - return PTR_ERR(tdma->ahub_clk);
> + return dev_err_probe(&pdev->dev, PTR_ERR(tdma->ahub_clk),
> + "failed to get ahub clock\n");
> }
>
> tdma->dma_chan_mask = devm_kzalloc(&pdev->dev,
> @@ -1104,8 +1119,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
> (u32 *)tdma->dma_chan_mask,
> BITS_TO_U32(tdma->nr_channels));
> if (ret < 0 && (ret != -EINVAL)) {
> - dev_err(&pdev->dev, "dma-channel-mask is not complete.\n");
> - return ret;
> + return dev_err_probe(&pdev->dev, ret,
> + "dma-channel-mask is not complete.\n");
> }
>
> INIT_LIST_HEAD(&tdma->dma_dev.channels);
> @@ -1127,11 +1142,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
> cdata->global_ch_config_base + (4 * i);
> }
>
> - tdc->irq = of_irq_get(pdev->dev.of_node, i);
> - if (tdc->irq <= 0) {
> - ret = tdc->irq ?: -ENXIO;
> + ret = of_irq_get(pdev->dev.of_node, i);
> + if (ret <= 0) {
> + ret = dev_err_probe(&pdev->dev, ret ?: -ENXIO,
> + "failed to get IRQ for channel %d\n", i);
> goto irq_dispose;
> }
> + tdc->irq = ret;
>
> vchan_init(&tdc->vc, &tdma->dma_dev);
> tdc->vc.desc_free = tegra_adma_desc_free;
> @@ -1141,12 +1158,18 @@ static int tegra_adma_probe(struct platform_device *pdev)
> pm_runtime_enable(&pdev->dev);
>
> ret = pm_runtime_resume_and_get(&pdev->dev);
> - if (ret < 0)
> + if (ret < 0) {
> + ret = dev_err_probe(&pdev->dev, ret,
> + "runtime PM resume failed\n");
> goto rpm_disable;
> + }
>
> ret = tegra_adma_init(tdma);
> - if (ret)
> + if (ret) {
> + ret = dev_err_probe(&pdev->dev, ret,
> + "failed to initialize ADMA\n");
> goto rpm_put;
> + }
>
> dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
> dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
> @@ -1172,14 +1195,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
>
> ret = dma_async_device_register(&tdma->dma_dev);
> if (ret < 0) {
> - dev_err(&pdev->dev, "ADMA registration failed: %d\n", ret);
> + ret = dev_err_probe(&pdev->dev, ret,
> + "ADMA registration failed\n");
> goto rpm_put;
> }
>
> ret = of_dma_controller_register(pdev->dev.of_node,
> tegra_dma_of_xlate, tdma);
> if (ret < 0) {
> - dev_err(&pdev->dev, "ADMA OF registration failed %d\n", ret);
> + ret = dev_err_probe(&pdev->dev, ret,
> + "ADMA OF registration failed\n");
> goto dma_remove;
> }
>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks!
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths
2026-05-17 16:30 [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths Sheetal
2026-06-05 11:53 ` Jon Hunter
@ 2026-06-08 12:12 ` Vinod Koul
1 sibling, 0 replies; 3+ messages in thread
From: Vinod Koul @ 2026-06-08 12:12 UTC (permalink / raw)
To: dmaengine, Sheetal
Cc: Laxman Dewangan, Jon Hunter, Frank Li, Thierry Reding,
Mohan Kumar, Sameer Pujar, linux-tegra, linux-kernel
On Sun, 17 May 2026 16:30:45 +0000, Sheetal wrote:
> Add dev_err/dev_err_probe logging across failure paths to improve
> debuggability of DMA errors during runtime and probe.
>
> Use return dev_err_probe() pattern where no cleanup is required in the
> probe function. On error paths that need explicit unwind, store the
> dev_err_probe() return value in ret before jumping to the cleanup label.
> Also convert existing dev_err calls in probe to dev_err_probe for
> consistency, and use dev_err in non-probe functions.
>
> [...]
Applied, thanks!
[1/1] dmaengine: tegra210-adma: Add error logging on failure paths
commit: b55bfcc677dd58d808a53173e0574b466dc27b9f
Best regards,
--
~Vinod
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-06-08 12:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-05-17 16:30 [PATCH v7] dmaengine: tegra210-adma: Add error logging on failure paths Sheetal
2026-06-05 11:53 ` Jon Hunter
2026-06-08 12:12 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®