From: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Wesley Cheng <quic_wcheng@quicinc.com>,
Ulf Hansson <ulfh@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-mmc@vger.kernel.org, monish.chunara@oss.qualcomm.com,
Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Subject: [PATCH v3 4/5] arm64: dts: qcom: Add Shikra IQ2390S SoM platform
Date: Fri, 22 May 2026 23:32:27 +0530 [thread overview]
Message-ID: <20260522-shikra-dt-v3-4-80ffde8a3dc4@oss.qualcomm.com> (raw)
In-Reply-To: <20260522-shikra-dt-v3-0-80ffde8a3dc4@oss.qualcomm.com>
Add device tree include for the IQ2390S variant of the Shikra
System-on-Module, an industrial compute module integrating the Shikra
SoC and PMIC for industrial IoT applications, designed to mount on
carrier boards.
- shikra-iqs-som.dtsi: Industrial SoM without modem (PM8150 PMIC)
The DTSI includes the common shikra.dtsi and adds PM8150 PMIC regulator
definitions specific to this variant.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 170 +++++++++++++++++++++++++++
1 file changed, 170 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
new file mode 100644
index 000000000000..73945bf42112
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "shikra.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+ gpio-key {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_n>;
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-up;
+ power-source = <0>;
+ };
+
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8150-regulators";
+
+ pm8150_s4: s4 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ pm8150_s5: s5 {
+ regulator-min-microvolt = <1574000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ pm8150_s6: s6 {
+ regulator-min-microvolt = <382000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ pm8150_s7: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8150_s8: s8 {
+ regulator-min-microvolt = <570000>;
+ regulator-max-microvolt = <650000>;
+ };
+
+ pm8150_l1: l1 {
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm8150_l2: l2 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8150_l3: l3 {
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm8150_l4: l4 {
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <975000>;
+ };
+
+ pm8150_l5: l5 {
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8150_l6: l6 {
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8150_l7: l7 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm8150_l8: l8 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm8150_l9: l9 {
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8150_l10: l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm8150_l11: l11 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm8150_l12: l12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ };
+
+ pm8150_l13: l13 {
+ regulator-min-microvolt = <2921000>;
+ regulator-max-microvolt = <3230000>;
+ };
+
+ pm8150_l14: l14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1910000>;
+ };
+
+ pm8150_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8150_l16: l16 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm8150_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm8150_l18: l18 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2026-05-22 18:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 18:02 [PATCH v3 0/5] arm64: dts: qcom: Add initial device tree support for Shikra Komal Bajaj
2026-05-22 18:02 ` [PATCH v3 1/5] dt-bindings: arm: qcom: Document Shikra and its EVK boards Komal Bajaj
2026-05-26 15:45 ` Krzysztof Kozlowski
2026-05-27 7:12 ` Komal Bajaj
2026-05-27 8:55 ` Krzysztof Kozlowski
2026-05-27 14:09 ` Komal Bajaj
2026-05-22 18:02 ` [PATCH v3 2/5] arm64: dts: qcom: Introduce Shikra SoC base dtsi Komal Bajaj
2026-05-22 18:02 ` [PATCH v3 3/5] arm64: dts: qcom: Add Shikra CQ2390M SoM platform Komal Bajaj
2026-05-25 13:16 ` Konrad Dybcio
2026-05-27 13:32 ` Komal Bajaj
2026-06-08 10:44 ` Konrad Dybcio
2026-05-22 18:02 ` Komal Bajaj [this message]
2026-05-22 18:02 ` [PATCH v3 5/5] arm64: dts: qcom: Add Shikra EVK boards Komal Bajaj
2026-05-25 13:17 ` Konrad Dybcio
2026-05-25 13:14 ` [PATCH v3 0/5] arm64: dts: qcom: Add initial device tree support for Shikra Konrad Dybcio
2026-05-27 13:51 ` Komal Bajaj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260522-shikra-dt-v3-4-80ffde8a3dc4@oss.qualcomm.com \
--to=komal.bajaj@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=monish.chunara@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_wcheng@quicinc.com \
--cc=robh@kernel.org \
--cc=ulfh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®