[PATCH v3 0/2] Add eDP lane mapping support

[PATCH v3 0/2] Add eDP lane mapping support

[Damon Ding]

This series adds configurable eDP physical lane mapping support via
device tree data-lanes property.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

The series includes driver implementation and device tree binding
updates to support custom lane mapping configuration from endpoint
node, and keeps default linear lane order if no configuration is given.

Patch 1: Add endpoint data-lanes property to analogix-dp binding
Patch 2: Implement lane mapping in analogix_dp driver

Damon Ding (2):
  dt-bindings: display: bridge: analogix-dp: Add data-lanes support for
    endpoint
  drm/bridge: analogix_dp: Add support for optional data-lanes mapping

 .../bindings/display/bridge/analogix,dp.yaml  | 19 +++++--
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 .../drm/bridge/analogix/analogix_dp_core.c    | 56 +++++++++++++++++++
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 +++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 6 files changed, 85 insertions(+), 14 deletions(-)

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

Changes in v3:
- Squash [PATCH v2 2/3] into [PATCH v2 1/3].
- Add unevaluatedProperties: false to both the port@1 and endpoint
  nodes.

-- 
2.34.1

[PATCH v3 1/2] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

[Damon Ding]

Add data-lanes property support to the port@1 endpoint for physical
lane mapping configuration.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Additionally, add data-lanes setting in Rockchip eDP DT node example
to show actual lane mapping usage.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

Changes in v3:
- Squash data-lanes adjustment of Rockchip eDP DT example into this
  commit.
- Add unevaluatedProperties: false to both the port@1 and endpoint
  nodes.
---
 .../bindings/display/bridge/analogix,dp.yaml  | 19 ++++++++++++++-----
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index 62f0521b0924..ecf206871cdd 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -42,13 +42,22 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Input node to receive pixel data.
+        description: Input node to receive pixel data.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a dp-connector node.
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Port node with one endpoint connected to sink device node.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
 
     required:
       - port@0
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
index b4ec101b77a3..cf3ad33a0e86 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -154,6 +154,7 @@ examples:
           reg = <1>;
 
           edp_out_panel: endpoint {
+            data-lanes = <0 1>;
             remote-endpoint = <&panel_in_edp>;
           };
         };
-- 
2.34.1

[PATCH v3 2/2] drm/bridge: analogix_dp: Add support for optional data-lanes mapping

[Damon Ding]

Parse the optional 'data-lanes' device tree property to support
custom physical lane mapping configuration.

If no valid configuration is found, fall back to the default
lane map (0, 1, 2, 3) automatically and keep the driver running.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 56 +++++++++++++++++++
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 +++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 4 files changed, 70 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5dc07ff84cd3..d1c6365118de 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1234,6 +1234,59 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.detect = analogix_dp_bridge_detect,
 };
 
+static int analogix_dp_dt_parse_lanes_map(struct analogix_dp_device *dp)
+{
+	struct video_info *video_info = &dp->video_info;
+	struct device_node *endpoint;
+	u32 tmp[LANE_COUNT4];
+	u32 map[LANE_COUNT4] = {0, 1, 2, 3};
+	bool used[LANE_COUNT4] = {false};
+	int num_lanes;
+	int ret, i;
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	num_lanes = drm_of_get_data_lanes_count_ep(dp->dev->of_node, 1, 0, 1,
+						   video_info->max_lane_count);
+	if (num_lanes < 0)
+		return -EINVAL;
+
+	endpoint = of_graph_get_endpoint_by_regs(dp->dev->of_node, 1, -1);
+	if (!endpoint)
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(endpoint, "data-lanes", tmp, num_lanes);
+	of_node_put(endpoint);
+	if (ret)
+		return -EINVAL;
+
+	for (i = 0; i < num_lanes; i++) {
+		if (tmp[i] >= LANE_COUNT4) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is out of range\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		if (used[tmp[i]]) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is duplicate\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		used[tmp[i]] = true;
+		map[i] = tmp[i];
+	}
+
+	for (i = 0; i < LANE_COUNT4 && num_lanes < LANE_COUNT4; i++) {
+		if (!used[i])
+			map[num_lanes++] = i;
+	}
+
+	dev_dbg(dp->dev, "Using parsed lane map: <%u %u %u %u>\n", map[0], map[1], map[2], map[3]);
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	return 0;
+}
+
 static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 {
 	struct device_node *dp_node = dp->dev->of_node;
@@ -1266,6 +1319,9 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 		break;
 	}
 
+	if (analogix_dp_dt_parse_lanes_map(dp))
+		dev_dbg(dp->dev, "No valid data-lanes found, using default lane map\n");
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 94348c4e3623..a75d0fb8f980 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -137,6 +137,8 @@ struct video_info {
 
 	int max_link_rate;
 	enum link_lane_count_type max_lane_count;
+
+	u32 lane_map[LANE_COUNT4];
 };
 
 struct link_train {
@@ -175,7 +177,7 @@ struct analogix_dp_device {
 /* analogix_dp_reg.c */
 void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
 void analogix_dp_stop_video(struct analogix_dp_device *dp);
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp);
 void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
 void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
 void analogix_dp_reset(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index ea8401293a23..c1344a3f013a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -48,16 +48,15 @@ void analogix_dp_stop_video(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
 }
 
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp)
 {
+	u32 *lane_map = dp->video_info.lane_map;
 	u32 reg;
 
-	if (enable)
-		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
-		      LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
-	else
-		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
-		      LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+	reg = lane_map[0] << LANE0_MAP_SHIFT;
+	reg |= lane_map[1] << LANE1_MAP_SHIFT;
+	reg |= lane_map[2] << LANE2_MAP_SHIFT;
+	reg |= lane_map[3] << LANE3_MAP_SHIFT;
 
 	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
 }
@@ -140,7 +139,7 @@ void analogix_dp_reset(struct analogix_dp_device *dp)
 
 	usleep_range(20, 30);
 
-	analogix_dp_lane_swap(dp, 0);
+	analogix_dp_lane_mapping(dp);
 
 	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
 	writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 12735139046c..ac914e37089b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -209,6 +209,10 @@
 #define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
 #define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
 #define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+#define LANE3_MAP_SHIFT				(6)
+#define LANE2_MAP_SHIFT				(4)
+#define LANE1_MAP_SHIFT				(2)
+#define LANE0_MAP_SHIFT				(0)
 
 /* ANALOGIX_DP_ANALOG_CTL_1 */
 #define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
-- 
2.34.1

Re: [PATCH v3 2/2] drm/bridge: analogix_dp: Add support for optional data-lanes mapping

[Luca Ceresoli]

On Mon, 25 May 2026 17:47:31 +0800, Damon Ding <damon.ding@rock-chips.com> wrote:

Hello Damon,

>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 8cf6b73bceac..d53ab25bc57b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -1234,6 +1234,59 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
> [ ... skip 11 lines ... ]
> +	int ret, i;
> +
> +	memcpy(video_info->lane_map, map, sizeof(map));
> +
> +	num_lanes = drm_of_get_data_lanes_count_ep(dp->dev->of_node, 1, 0, 1,
> +						   video_info->max_lane_count);

Should num_lanes be > 4, the buffers could overflow. I realize it should
not happen, but analogix_dp_dt_parse_pdata() can set max_lane_count from
the device tree, so a bogus dtb could cause such overflow.

Perhaps you should just (in a separate patch) error out in
analogix_dp_dt_parse_pdata() to prevent this. And maybe even adding an
BUG_ON(lane_count > 4) here.

Otherwise LGTM.

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v3 2/2] drm/bridge: analogix_dp: Add support for optional data-lanes mapping

[Damon Ding]

Hi Luca,

On 5/26/2026 8:07 PM, Luca Ceresoli wrote:
> On Mon, 25 May 2026 17:47:31 +0800, Damon Ding <damon.ding@rock-chips.com> wrote:
> 
> Hello Damon,
> 
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> index 8cf6b73bceac..d53ab25bc57b 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> @@ -1234,6 +1234,59 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
>> [ ... skip 11 lines ... ]
>> +	int ret, i;
>> +
>> +	memcpy(video_info->lane_map, map, sizeof(map));
>> +
>> +	num_lanes = drm_of_get_data_lanes_count_ep(dp->dev->of_node, 1, 0, 1,
>> +						   video_info->max_lane_count);
> 
> Should num_lanes be > 4, the buffers could overflow. I realize it should
> not happen, but analogix_dp_dt_parse_pdata() can set max_lane_count from
> the device tree, so a bogus dtb could cause such overflow.
> 
> Perhaps you should just (in a separate patch) error out in
> analogix_dp_dt_parse_pdata() to prevent this. And maybe even adding an
> BUG_ON(lane_count > 4) here.
> 
> Otherwise LGTM.
> 

Thank you for the review.

I think it would be a better idea to add a separate patch to validate 
the max_link_rate and max_lane_count values for Exynos DP.

I checked the Exynos DP related DTS files:
- The maximum value of samsung,lane-count is 4
- The maximum value of samsung,link-rate is 0x0a, which corresponds to 
the HBR lane rate.

Could Marek please help confirm if we can set these as the upper limits 
for the checks?

Best regards,
Damon