mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Joshua Crofts via B4 Relay <devnull+joshua.crofts1.gmail.com@kernel.org>
Cc: joshua.crofts1@gmail.com, "David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Maxwell Doose" <m32285159@gmail.com>
Subject: Re: [PATCH v4 3/8] iio: light: opt3001: ensure correct parenthesis alignment
Date: Wed, 27 May 2026 19:30:19 +0100	[thread overview]
Message-ID: <20260527193019.367da1db@jic23-huawei> (raw)
In-Reply-To: <20260525-opt3001-cleanup-v4-3-65b36a174f78@gmail.com>

On Mon, 25 May 2026 10:20:17 +0200
Joshua Crofts via B4 Relay <devnull+joshua.crofts1.gmail.com@kernel.org> wrote:

> From: Joshua Crofts <joshua.crofts1@gmail.com>
> 
> Ensure correct parenthesis alignment per checkpatch.pl report.
> 
> No functional change.
> 
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Maxwell Doose <m32285159@gmail.com>
> Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
I was optimistic we could get the fix in via one tree and the rest via
another but nope - this changes alignment of stuff to close to that fix.

Ah well. This will have to wait for that fix to make it into an upstream
release. I might do a pull request for fixes sometime later this week to
get that going.

Jonathan

> ---
>  drivers/iio/light/opt3001.c | 73 +++++++++++++++++++++++++--------------------
>  1 file changed, 41 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
> index efaad85dfaf3afc9199fd3124d832ee2a297f0b3..532929e8fa8b4172eadc696e927315017a07dac1 100644
> --- a/drivers/iio/light/opt3001.c
> +++ b/drivers/iio/light/opt3001.c
> @@ -223,8 +223,8 @@ static const struct opt3001_scale opt3002_scales[] = {
>  	},
>  };
>  
> -static int opt3001_find_scale(const struct opt3001 *opt, int val,
> -		int val2, u8 *exponent)
> +static int opt3001_find_scale(const struct opt3001 *opt, int val, int val2,
> +			      u8 *exponent)
>  {
>  	int i;
>  	for (i = 0; i < ARRAY_SIZE(*opt->chip_info->scales); i++) {
> @@ -242,8 +242,8 @@ static int opt3001_find_scale(const struct opt3001 *opt, int val,
>  	return -EINVAL;
>  }
>  
> -static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent,
> -		u16 mantissa, int *val, int *val2)
> +static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent, u16 mantissa,
> +			       int *val, int *val2)
>  {
>  	int ret;
>  	int whole = opt->chip_info->factor_whole;
> @@ -364,8 +364,8 @@ static int opt3001_get_processed(struct opt3001 *opt, int *val, int *val2)
>  	if (opt->use_irq) {
>  		/* Wait for the IRQ to indicate the conversion is complete */
>  		ret = wait_event_timeout(opt->result_ready_queue,
> -				opt->result_ready,
> -				msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
> +					 opt->result_ready,
> +					 msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
>  		if (ret == 0)
>  			return -ETIMEDOUT;
>  	} else {
> @@ -474,8 +474,8 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time)
>  }
>  
>  static int opt3001_read_raw(struct iio_dev *iio,
> -		struct iio_chan_spec const *chan, int *val, int *val2,
> -		long mask)
> +			    struct iio_chan_spec const *chan,
> +			    int *val, int *val2, long mask)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  	int ret;
> @@ -506,8 +506,8 @@ static int opt3001_read_raw(struct iio_dev *iio,
>  }
>  
>  static int opt3001_write_raw(struct iio_dev *iio,
> -		struct iio_chan_spec const *chan, int val, int val2,
> -		long mask)
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  	int ret;
> @@ -532,9 +532,11 @@ static int opt3001_write_raw(struct iio_dev *iio,
>  }
>  
>  static int opt3001_read_event_value(struct iio_dev *iio,
> -		const struct iio_chan_spec *chan, enum iio_event_type type,
> -		enum iio_event_direction dir, enum iio_event_info info,
> -		int *val, int *val2)
> +				    const struct iio_chan_spec *chan,
> +				    enum iio_event_type type,
> +				    enum iio_event_direction dir,
> +				    enum iio_event_info info,
> +				    int *val, int *val2)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  	int ret = IIO_VAL_INT_PLUS_MICRO;
> @@ -544,11 +546,13 @@ static int opt3001_read_event_value(struct iio_dev *iio,
>  	switch (dir) {
>  	case IIO_EV_DIR_RISING:
>  		opt3001_to_iio_ret(opt, opt->high_thresh_exp,
> -				opt->high_thresh_mantissa, val, val2);
> +				   opt->high_thresh_mantissa,
> +				   val, val2);
>  		break;
>  	case IIO_EV_DIR_FALLING:
>  		opt3001_to_iio_ret(opt, opt->low_thresh_exp,
> -				opt->low_thresh_mantissa, val, val2);
> +				   opt->low_thresh_mantissa,
> +				   val, val2);
>  		break;
>  	default:
>  		ret = -EINVAL;
> @@ -560,9 +564,11 @@ static int opt3001_read_event_value(struct iio_dev *iio,
>  }
>  
>  static int opt3001_write_event_value(struct iio_dev *iio,
> -		const struct iio_chan_spec *chan, enum iio_event_type type,
> -		enum iio_event_direction dir, enum iio_event_info info,
> -		int val, int val2)
> +				     const struct iio_chan_spec *chan,
> +				     enum iio_event_type type,
> +				     enum iio_event_direction dir,
> +				     enum iio_event_info info,
> +				     int val, int val2)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  	struct i2c_client *client = opt->client;
> @@ -626,8 +632,9 @@ static int opt3001_write_event_value(struct iio_dev *iio,
>  }
>  
>  static int opt3001_read_event_config(struct iio_dev *iio,
> -		const struct iio_chan_spec *chan, enum iio_event_type type,
> -		enum iio_event_direction dir)
> +				     const struct iio_chan_spec *chan,
> +				     enum iio_event_type type,
> +				     enum iio_event_direction dir)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  
> @@ -635,8 +642,10 @@ static int opt3001_read_event_config(struct iio_dev *iio,
>  }
>  
>  static int opt3001_write_event_config(struct iio_dev *iio,
> -		const struct iio_chan_spec *chan, enum iio_event_type type,
> -		enum iio_event_direction dir, bool state)
> +				      const struct iio_chan_spec *chan,
> +				      enum iio_event_type type,
> +				      enum iio_event_direction dir,
> +				      bool state)
>  {
>  	struct opt3001 *opt = iio_priv(iio);
>  	struct i2c_client *client = opt->client;
> @@ -812,16 +821,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
>  			OPT3001_CONFIGURATION_M_CONTINUOUS) {
>  		if (ret & OPT3001_CONFIGURATION_FH)
>  			iio_push_event(iio,
> -					IIO_UNMOD_EVENT_CODE(chan_type, 0,
> -							IIO_EV_TYPE_THRESH,
> -							IIO_EV_DIR_RISING),
> -					iio_get_time_ns(iio));
> +				       IIO_UNMOD_EVENT_CODE(chan_type, 0,
> +							    IIO_EV_TYPE_THRESH,
> +							    IIO_EV_DIR_RISING),
> +				       iio_get_time_ns(iio));
>  		if (ret & OPT3001_CONFIGURATION_FL)
>  			iio_push_event(iio,
> -					IIO_UNMOD_EVENT_CODE(chan_type, 0,
> -							IIO_EV_TYPE_THRESH,
> -							IIO_EV_DIR_FALLING),
> -					iio_get_time_ns(iio));
> +				       IIO_UNMOD_EVENT_CODE(chan_type, 0,
> +							    IIO_EV_TYPE_THRESH,
> +							    IIO_EV_DIR_FALLING),
> +				       iio_get_time_ns(iio));
>  	} else if (ret & OPT3001_CONFIGURATION_CRF) {
>  		ret = i2c_smbus_read_word_swapped(client, OPT3001_RESULT);
>  		if (ret < 0) {
> @@ -884,8 +893,8 @@ static int opt3001_probe(struct i2c_client *client)
>  	/* Make use of INT pin only if valid IRQ no. is given */
>  	if (irq > 0) {
>  		ret = request_threaded_irq(irq, NULL, opt3001_irq,
> -				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				"opt3001", iio);
> +					   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +					   "opt3001", iio);
>  		if (ret) {
>  			dev_err(dev, "failed to request IRQ #%d\n", irq);
>  			return ret;
> 


  reply	other threads:[~2026-05-27 18:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-25  8:20 [PATCH v4 0/8] iio: light: opt3001: driver cleanup Joshua Crofts via B4 Relay
2026-05-25  8:20 ` [PATCH v4 1/8] iio: light: opt3001: move device registration to end of probe() Joshua Crofts via B4 Relay
2026-05-25  9:06   ` Joshua Crofts
2026-05-27 18:19   ` Jonathan Cameron
2026-05-25  8:20 ` [PATCH v4 2/8] iio: light: opt3001: use local struct device and i2c_client variables Joshua Crofts via B4 Relay
2026-06-02 10:43   ` Andy Shevchenko
2026-05-25  8:20 ` [PATCH v4 3/8] iio: light: opt3001: ensure correct parenthesis alignment Joshua Crofts via B4 Relay
2026-05-27 18:30   ` Jonathan Cameron [this message]
2026-05-28  7:10     ` Joshua Crofts
2026-05-25  8:20 ` [PATCH v4 4/8] iio: light: opt3001: localize for loop iterator Joshua Crofts via B4 Relay
2026-05-25 22:52   ` Maxwell Doose
2026-05-25  8:20 ` [PATCH v4 5/8] iio: light: opt3001: prefer dev_err_probe() Joshua Crofts via B4 Relay
2026-05-25 20:48   ` Maxwell Doose
2026-05-25  8:20 ` [PATCH v4 6/8] iio: light: opt3001: move driver to guard(mutex)() use Joshua Crofts via B4 Relay
2026-05-25  8:20 ` [PATCH v4 7/8] iio: light: opt3001: switch driver to managed resources Joshua Crofts via B4 Relay
2026-05-27 18:24   ` Jonathan Cameron
2026-05-25  8:20 ` [PATCH v4 8/8] iio: light: opt3001: add comment to mutex Joshua Crofts via B4 Relay
2026-05-25 10:38 ` [PATCH v4 0/8] iio: light: opt3001: driver cleanup Joshua Crofts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260527193019.367da1db@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=devnull+joshua.crofts1.gmail.com@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=joshua.crofts1@gmail.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m32285159@gmail.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome