mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marco Scardovi <scardracs@disroot.org>
To: scardracs@disroot.org
Cc: kprateek.nayak@amd.com, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, mario.limonciello@amd.com,
	perry.yuan@amd.com, rafael@kernel.org, ray.huang@amd.com,
	stuartmeckle@gmail.com, viresh.kumar@linaro.org,
	wyes.karny@amd.com
Subject: [PATCH v4 1/1] cpufreq/amd-pstate: Fix EPP initialization for shared memory systems
Date: Sat,  6 Jun 2026 08:57:15 +0200	[thread overview]
Message-ID: <20260606065756.4442-2-scardracs@disroot.org> (raw)
In-Reply-To: <20260606065756.4442-1-scardracs@disroot.org>

At CPU initialization, the private cpudata structure is allocated via
kzalloc, which means cpudata->cppc_req_cached is initialized to 0. This
makes the default cached EPP value 0 (AMD_CPPC_EPP_PERFORMANCE).

When initializing a system that defaults to performance EPP, the driver
attempts to configure the EPP via amd_pstate_set_epp(). Because the
requested EPP (0) matches the uninitialized cached value (0), the cache
guard check triggers, and the driver skips writing to the hardware.

On shared memory systems, the EPP write via cppc_set_epp_perf() is also
responsible for toggling on the autonomous selection register (auto_sel).
Skipping the EPP write consequently skips enabling auto_sel, leaving the
CPU in non-autonomous mode. This prevents the hardware from boosting and
leaves the CPU frequency stuck at the lowest non-linear frequency (1.7GHz).

Fix this by:
1. Caching the firmware programmed default EPP value in cppc_req_cached
   during CPU EPP initialization.
2. Propagating negative error codes from amd_pstate_get_epp() correctly
   while caching the firmware EPP value. Change msr_get_epp() and
   shmem_get_epp() to return signed int instead of u8. Also change
   amd_pstate_get_epp() return type and the local default_epp variable
   in amd_pstate_epp_cpu_init() to int.
3. Executing the remaining shared-memory initialization path even when
   booting in active mode, rather than bypassing it through an early
   return.

Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221473
Assisted-by: Antigravity:gemini-3.5-flash
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
---
 drivers/cpufreq/amd-pstate.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 8d55e2be825b..a35cf126e335 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -199,7 +199,7 @@ static inline int get_mode_idx_from_str(const char *str, size_t size)
 
 static DEFINE_MUTEX(amd_pstate_driver_lock);
 
-static u8 msr_get_epp(struct amd_cpudata *cpudata)
+static int msr_get_epp(struct amd_cpudata *cpudata)
 {
 	u64 value;
 	int ret;
@@ -215,12 +215,12 @@ static u8 msr_get_epp(struct amd_cpudata *cpudata)
 
 DEFINE_STATIC_CALL(amd_pstate_get_epp, msr_get_epp);
 
-static inline s16 amd_pstate_get_epp(struct amd_cpudata *cpudata)
+static inline int amd_pstate_get_epp(struct amd_cpudata *cpudata)
 {
 	return static_call(amd_pstate_get_epp)(cpudata);
 }
 
-static u8 shmem_get_epp(struct amd_cpudata *cpudata)
+static int shmem_get_epp(struct amd_cpudata *cpudata)
 {
 	u64 epp;
 	int ret;
@@ -525,10 +525,6 @@ static int shmem_init_perf(struct amd_cpudata *cpudata)
 	perf.lowest_perf = cppc_perf.lowest_perf;
 	WRITE_ONCE(cpudata->perf, perf);
 	WRITE_ONCE(cpudata->prefcore_ranking, cppc_perf.highest_perf);
-
-	if (cppc_state == AMD_PSTATE_ACTIVE)
-		return 0;
-
 	ret = cppc_get_auto_sel(cpudata->cpu, &auto_sel);
 	if (ret) {
 		pr_warn("failed to get auto_sel, ret: %d\n", ret);
@@ -1877,6 +1873,7 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 	struct amd_cpudata *cpudata;
 	union perf_cached perf;
 	struct device *dev;
+	int default_epp;
 	int ret;
 
 	/*
@@ -1926,6 +1923,14 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 
 	policy->boost_supported = READ_ONCE(cpudata->boost_supported);
 
+	/* Cache the firmware programmed EPP */
+	default_epp = amd_pstate_get_epp(cpudata);
+	if (default_epp < 0) {
+		ret = default_epp;
+		goto free_cpudata1;
+	}
+	FIELD_MODIFY(AMD_CPPC_EPP_PERF_MASK, &cpudata->cppc_req_cached, default_epp);
+
 	/*
 	 * Set the policy to provide a valid fallback value in case
 	 * the default cpufreq governor is neither powersave nor performance.
@@ -1933,7 +1938,7 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 	if (amd_pstate_acpi_pm_profile_server() ||
 	    amd_pstate_acpi_pm_profile_undefined()) {
 		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
-		cpudata->epp_default_ac = cpudata->epp_default_dc = amd_pstate_get_epp(cpudata);
+		cpudata->epp_default_ac = cpudata->epp_default_dc = default_epp;
 		cpudata->current_profile = PLATFORM_PROFILE_PERFORMANCE;
 	} else {
 		policy->policy = CPUFREQ_POLICY_POWERSAVE;
-- 
2.54.0


  reply	other threads:[~2026-06-06  6:58 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-05 10:26 [PATCH v3 0/1] " Marco Scardovi
2026-06-05 10:26 ` [PATCH v3 1/1] " Marco Scardovi
2026-06-05 18:24   ` Mario Limonciello
2026-06-06  6:57 ` [PATCH v4 0/1] " Marco Scardovi
2026-06-06  6:57   ` Marco Scardovi [this message]
2026-06-08  4:21     ` [PATCH v4 1/1] " K Prateek Nayak
2026-06-08  7:31       ` [PATCH v5 0/3] cpufreq/amd-pstate: Fix EPP and auto_sel initialization Marco Scardovi
2026-06-08  7:31         ` [PATCH v5 1/3] cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization Marco Scardovi
2026-06-09  4:45           ` K Prateek Nayak
2026-06-08  7:31         ` [PATCH v5 2/3] cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems Marco Scardovi
2026-06-09  4:47           ` K Prateek Nayak
2026-06-08  7:31         ` [PATCH v5 3/3] cpufreq/amd-pstate: Cache the firmware programmed EPP value Marco Scardovi
2026-06-09  4:50           ` K Prateek Nayak
2026-06-09  7:18         ` [PATCH v5 0/3] cpufreq/amd-pstate: Fix EPP and auto_sel initialization K Prateek Nayak
2026-06-09  7:29           ` [PATCH v6 " Marco Scardovi
2026-06-09  7:29             ` [PATCH v6 1/3] cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization Marco Scardovi
2026-06-09  7:29             ` [PATCH v6 2/3] cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems Marco Scardovi
2026-06-09  7:29             ` [PATCH v6 3/3] cpufreq/amd-pstate: Cache the firmware programmed EPP value Marco Scardovi
2026-06-09 13:48             ` [PATCH v6 0/3] cpufreq/amd-pstate: Fix EPP and auto_sel initialization Mario Limonciello
2026-06-10  7:09               ` Marco Scardovi
2026-06-08 16:06       ` [PATCH v4 1/1] cpufreq/amd-pstate: Fix EPP initialization for shared memory systems Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260606065756.4442-2-scardracs@disroot.org \
    --to=scardracs@disroot.org \
    --cc=kprateek.nayak@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=perry.yuan@amd.com \
    --cc=rafael@kernel.org \
    --cc=ray.huang@amd.com \
    --cc=stuartmeckle@gmail.com \
    --cc=viresh.kumar@linaro.org \
    --cc=wyes.karny@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®