[PATCH v6 2/3] cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems

[Marco Scardovi <scardracs@disroot.org>]

On shared memory systems, the EPP configuration path (handled via
cppc_set_epp_perf()) is responsible for toggling on the CPPC autonomous
selection register (auto_sel).

Currently, shmem_init_perf() returns early without doing any of the auto_sel
configuration steps if cppc_state is AMD_PSTATE_ACTIVE. This skips enabling
auto_sel, leaving the CPU in non-autonomous mode.

Remove the early return check in shmem_init_perf() when cppc_state is
AMD_PSTATE_ACTIVE. Toggling auto_sel is necessary for the active mode on
shared memory systems to function based on the ACPI spec for CPPC v2 and
below.

Fixes: 2dd6d0ebf740 ("cpufreq: amd-pstate: Add guided autonomous mode")
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
---
 drivers/cpufreq/amd-pstate.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index a04ff2bad4dd..c67e02f77059 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -526,9 +526,6 @@ static int shmem_init_perf(struct amd_cpudata *cpudata)
 	WRITE_ONCE(cpudata->perf, perf);
 	WRITE_ONCE(cpudata->prefcore_ranking, cppc_perf.highest_perf);
 
-	if (cppc_state == AMD_PSTATE_ACTIVE)
-		return 0;
-
 	ret = cppc_get_auto_sel(cpudata->cpu, &auto_sel);
 	if (ret) {
 		pr_warn("failed to get auto_sel, ret: %d\n", ret);
-- 
2.54.0