[PATCH 0/2] regulator: qcom_smd-regulator: Add PM8019

[PATCH 0/2] regulator: qcom_smd-regulator: Add PM8019

[Stephan Gerhold]

Add the definitions and dt-bindings for the regulators in PM8019 to allow
controlling them through the RPM firmware. PM8019 is typically used
together with the MDM9607 SoC.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
Stephan Gerhold (2):
      regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
      regulator: qcom_smd-regulator: Add PM8019

 .../bindings/regulator/qcom,smd-rpm-regulator.yaml |  4 ++++
 drivers/regulator/qcom_smd-regulator.c             | 23 ++++++++++++++++++++++
 2 files changed, 27 insertions(+)
---
base-commit: 382f7d3b4c9740ac06199207796ed9b71582c7c5
change-id: 20260608-rpm-smd-regulator-pm8019-c23eb07834a1

Best regards,
--  
Stephan Gerhold <stephan.gerhold@linaro.org>

[PATCH 1/2] regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019

[Stephan Gerhold]

Add the qcom,rpm-pm8019-regulators compatible to allow describing
regulators controlled by the RPM firmware on platforms that use PM8019.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
 .../devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index 0fa0db7eef23..0d8bc9bf996a 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -35,6 +35,9 @@ description:
 
   For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
 
+  For pm8019, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14
+
   For pm8150, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, l1, l2, l3, l4, l5, l6,
   l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18
 
@@ -94,6 +97,7 @@ properties:
       - qcom,rpm-pm6125-regulators
       - qcom,rpm-pm660-regulators
       - qcom,rpm-pm660l-regulators
+      - qcom,rpm-pm8019-regulators
       - qcom,rpm-pm8150-regulators
       - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators

-- 
2.54.0

[PATCH 2/2] regulator: qcom_smd-regulator: Add PM8019

[Stephan Gerhold]

From: Stephan Gerhold <stephan@gerhold.net>

Add the definitions for the regulators in PM8019 to allow controlling them
through the RPM firmware. Reading the TYPE/SUBTYPE registers using SPMI
reveals that PM8019 uses a mixture of regulators from PMA8084 (hfsmps,
pldo) and PM8916 (nldo).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/regulator/qcom_smd-regulator.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 3ee7f5d0c694..23ed594b574e 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -913,6 +913,28 @@ static const struct rpm_regulator_data rpm_pm660l_regulators[] = {
 	{ }
 };
 
+static const struct rpm_regulator_data rpm_pm8019_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_hfsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_pldo, "vdd_l2_l3" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_pldo, "vdd_l2_l3" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_pldo, "vdd_l4_l5_l6" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l4_l5_l6" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l4_l5_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l7_l8_l11" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l7_l8_l11" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_nldo, "vdd_l9" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_nldo, "vdd_l10"},
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_pldo, "vdd_l7_l8_l11"},
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_nldo, "vdd_l12"},
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l13_l14"},
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l13_l14"},
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8150_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pmic5_ftsmps520, "vdd-s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pmic5_ftsmps520, "vdd-s2" },
@@ -1390,6 +1412,7 @@ static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm6125-regulators", .data = &rpm_pm6125_regulators },
 	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
 	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
+	{ .compatible = "qcom,rpm-pm8019-regulators", .data = &rpm_pm8019_regulators },
 	{ .compatible = "qcom,rpm-pm8150-regulators", .data = &rpm_pm8150_regulators },
 	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },

-- 
2.54.0

Re: [PATCH 1/2] regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019

[Krzysztof Kozlowski]

On Mon, Jun 08, 2026 at 02:05:43PM +0200, Stephan Gerhold wrote:
> Add the qcom,rpm-pm8019-regulators compatible to allow describing
> regulators controlled by the RPM firmware on platforms that use PM8019.
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
> ---
>  .../devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH 2/2] regulator: qcom_smd-regulator: Add PM8019

[Krzysztof Kozlowski]

On Mon, Jun 08, 2026 at 02:05:44PM +0200, Stephan Gerhold wrote:
> From: Stephan Gerhold <stephan@gerhold.net>
> 
> Add the definitions for the regulators in PM8019 to allow controlling them
> through the RPM firmware. Reading the TYPE/SUBTYPE registers using SPMI
> reveals that PM8019 uses a mixture of regulators from PMA8084 (hfsmps,
> pldo) and PM8916 (nldo).
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
>  drivers/regulator/qcom_smd-regulator.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH 0/2] regulator: qcom_smd-regulator: Add PM8019

[Mark Brown]

On Mon, 08 Jun 2026 14:05:42 +0200, Stephan Gerhold wrote:
> regulator: qcom_smd-regulator: Add PM8019
> 
> Add the definitions and dt-bindings for the regulators in PM8019 to allow
> controlling them through the RPM firmware. PM8019 is typically used
> together with the MDM9607 SoC.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-7.2

Thanks!

[1/2] regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
      https://git.kernel.org/broonie/regulator/c/b13a590e3aa3
[2/2] regulator: qcom_smd-regulator: Add PM8019
      https://git.kernel.org/broonie/regulator/c/5116c7f0e7ba

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark