mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vlad Poenaru <vlad.wing@gmail.com>
To: bpf@vger.kernel.org, "Alexei Starovoitov" <ast@kernel.org>,
	"Daniel Borkmann" <daniel@iogearbox.net>,
	"Andrii Nakryiko" <andrii@kernel.org>,
	"John Fastabend" <john.fastabend@gmail.com>,
	"Martin KaFai Lau" <martin.lau@linux.dev>,
	"Eduard Zingerman" <eddyz87@gmail.com>,
	"Kumar Kartikeya Dwivedi" <memxor@gmail.com>,
	"Song Liu" <song@kernel.org>,
	"Yonghong Song" <yonghong.song@linux.dev>,
	"Jiri Olsa" <jolsa@kernel.org>,
	"Toke Høiland-Jørgensen" <toke@redhat.com>
Cc: Emil Tsalapatis <emil@etsalapatis.com>,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH bpf v2 1/2] bpf, lpm_trie: Allow access from sleepable BPF programs
Date: Tue,  9 Jun 2026 06:55:57 -0700	[thread overview]
Message-ID: <20260609135558.193287-2-vlad.wing@gmail.com> (raw)
In-Reply-To: <20260609135558.193287-1-vlad.wing@gmail.com>

trie_lookup_elem() annotates its rcu_dereference_check() walks with
only rcu_read_lock_bh_held().  Because rcu_dereference_check(p, c)
resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and
classic RCU readers but fails for sleepable BPF programs, which enter
via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().

trie_update_elem() and trie_delete_elem() have the same problem in a
different form: they walk the trie with plain rcu_dereference(), which
asserts rcu_read_lock_held() unconditionally.  Both are reachable from
sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem
helpers, and from the syscall path under classic rcu_read_lock().  In
the writer paths the trie is actually protected by trie->lock (an
rqspinlock taken across the walk); we never relied on the RCU read-side
lock to keep nodes alive there.

A sleepable LSM hook that ends up touching an LPM trie therefore
triggers lockdep on debug kernels:

  =============================
  WARNING: suspicious RCU usage
  7.1.0-... Tainted: G            E
  -----------------------------
  kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage!
  1 lock held by net_tests/540:
   #0: (rcu_tasks_trace_srcu_struct){....}-{0:0},
       at: __bpf_prog_enter_sleepable+0x26/0x280
  Call Trace:
   dump_stack_lvl
   lockdep_rcu_suspicious
   trie_lookup_elem
   bpf_prog_..._enforce_security_socket_connect
   bpf_trampoline_...
   security_socket_connect
   __sys_connect
   do_syscall_64

This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize
against the trie's reclaim path -- but it spams the console once per
distinct callsite on every debug kernel running a sleepable BPF LSM
that touches an LPM trie, which is increasingly common.

For the lookup path, switch the rcu_dereference_check() annotation
from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all
three contexts (classic, BH, Tasks Trace).  Other map types already
follow this convention.

For trie_update_elem() and trie_delete_elem(), annotate the walks as
rcu_dereference_protected(*p, 1) -- matching trie_free() in the same
file -- since trie->lock is held across the walk.  rqspinlock has no
lockdep_map, so the predicate degenerates to '1' rather than
lockdep_is_held(&trie->lock); the protection is real but not
machine-verifiable.  trie_get_next_key() also uses bare
rcu_dereference() but is reachable only from the BPF syscall, which
holds classic rcu_read_lock() before dispatching, so it is left
untouched.

Fixes: 694cea395fde ("bpf: Allow RCU-protected lookups to happen from bh context")
Cc: stable@vger.kernel.org
Signed-off-by: Vlad Poenaru <vlad.wing@gmail.com>
---
 kernel/bpf/lpm_trie.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/bpf/lpm_trie.c b/kernel/bpf/lpm_trie.c
index 0f57608b385d..4d6f25db9ba1 100644
--- a/kernel/bpf/lpm_trie.c
+++ b/kernel/bpf/lpm_trie.c
@@ -246,7 +246,7 @@ static void *trie_lookup_elem(struct bpf_map *map, void *_key)
 
 	/* Start walking the trie from the root node ... */
 
-	for (node = rcu_dereference_check(trie->root, rcu_read_lock_bh_held());
+	for (node = rcu_dereference_check(trie->root, bpf_rcu_lock_held());
 	     node;) {
 		unsigned int next_bit;
 		size_t matchlen;
@@ -280,7 +280,7 @@ static void *trie_lookup_elem(struct bpf_map *map, void *_key)
 		 */
 		next_bit = extract_bit(key->data, node->prefixlen);
 		node = rcu_dereference_check(node->child[next_bit],
-					     rcu_read_lock_bh_held());
+					     bpf_rcu_lock_held());
 	}
 
 	if (!found)
@@ -359,7 +359,7 @@ static long trie_update_elem(struct bpf_map *map,
 	 */
 	slot = &trie->root;
 
-	while ((node = rcu_dereference(*slot))) {
+	while ((node = rcu_dereference_protected(*slot, 1))) {
 		matchlen = longest_prefix_match(trie, node, key);
 
 		if (node->prefixlen != matchlen ||
@@ -482,7 +482,7 @@ static long trie_delete_elem(struct bpf_map *map, void *_key)
 	trim = &trie->root;
 	trim2 = trim;
 	parent = NULL;
-	while ((node = rcu_dereference(*trim))) {
+	while ((node = rcu_dereference_protected(*trim, 1))) {
 		matchlen = longest_prefix_match(trie, node, key);
 
 		if (node->prefixlen != matchlen ||
-- 
2.53.0-Meta


  reply	other threads:[~2026-06-09 13:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-29 17:42 [PATCH bpf] bpf, lpm_trie: Allow lookups " Vlad Poenaru
2026-05-29 19:19 ` Emil Tsalapatis
2026-06-09 13:55 ` [PATCH bpf v2 0/2] bpf, lpm_trie: Allow sleepable BPF programs to use LPM tries Vlad Poenaru
2026-06-09 13:55   ` Vlad Poenaru [this message]
2026-06-09 16:36     ` [PATCH bpf v2 1/2] bpf, lpm_trie: Allow access from sleepable BPF programs Emil Tsalapatis
2026-06-09 13:55   ` [PATCH bpf v2 2/2] bpf, lpm_trie: Allow sleepable programs to use LPM trie maps directly Vlad Poenaru
2026-06-09 16:19     ` Emil Tsalapatis
2026-06-10  1:53     ` Hou Tao
2026-06-10  2:34       ` Alexei Starovoitov
2026-06-09 19:50   ` [PATCH bpf v2 0/2] bpf, lpm_trie: Allow sleepable BPF programs to use LPM tries patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260609135558.193287-2-vlad.wing@gmail.com \
    --to=vlad.wing@gmail.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=eddyz87@gmail.com \
    --cc=emil@etsalapatis.com \
    --cc=john.fastabend@gmail.com \
    --cc=jolsa@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.lau@linux.dev \
    --cc=memxor@gmail.com \
    --cc=song@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=toke@redhat.com \
    --cc=yonghong.song@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome