* [PATCH v4 0/2] Enable the QMP PCIe PHY present in Qualcomm ipq5210 SoC
@ 2026-06-16 5:04 Varadarajan Narayanan
2026-06-16 5:04 ` [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY Varadarajan Narayanan
2026-06-16 5:04 ` [PATCH v4 2/2] phy: qcom-qmp-pcie: Add support for ipq5210 PCIe phys Varadarajan Narayanan
0 siblings, 2 replies; 4+ messages in thread
From: Varadarajan Narayanan @ 2026-06-16 5:04 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Varadarajan Narayanan, Dmitry Baryshkov
Document the bindings and update the driver to support
the PCIe phy present in Qualcomm ipq5210 SoC.
v4: Fix commit message for the bindings patch by removing redundant content
and adding explanation for using specific compatible.
v3: https://lore.kernel.org/linux-arm-msm/20260610-pcie-phy-v3-0-334011b378d6@oss.qualcomm.com/
Fix commit message for the bindings patch
Remove unused tables from the phy driver (ipq5210_gen3x1_pcie_ep_tx_tbl
and ipq5210_gen3x1_pcie_ep_pcs_tbl)
v2: https://lore.kernel.org/r/20260609-pcie-phy-v2-0-83bc80e79fa6@oss.qualcomm.com
Had incorrectly made both the phys as fallback. The single
lane phy is standalone and double lane uses ipq9574 as
fallback.
v1: https://lore.kernel.org/linux-arm-msm/20260514-pci-phy-v1-0-482429192746@oss.qualcomm.com/
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
Varadarajan Narayanan (2):
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY
phy: qcom-qmp-pcie: Add support for ipq5210 PCIe phys
.../bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml | 2 +
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 129 +++++++++++++++++++++
2 files changed, 131 insertions(+)
---
base-commit: a87737435cfa134f9cdcc696ba3080759d04cf72
change-id: 20260609-pcie-phy-99fcf91a02fd
prerequisite-change-id: 20260514-icc-ipq5210-0ab03f3a3e83:v1
prerequisite-patch-id: 0b6145b6635b18fe79fbbff5815041b43778c5ed
prerequisite-patch-id: 924c6ff7baf4283ac7991ee94c803a00fc5cece4
prerequisite-patch-id: c2fe1800fe769dccd37f94c19860a07f979e3c4c
Best regards,
--
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY
2026-06-16 5:04 [PATCH v4 0/2] Enable the QMP PCIe PHY present in Qualcomm ipq5210 SoC Varadarajan Narayanan
@ 2026-06-16 5:04 ` Varadarajan Narayanan
2026-06-17 7:01 ` Krzysztof Kozlowski
2026-06-16 5:04 ` [PATCH v4 2/2] phy: qcom-qmp-pcie: Add support for ipq5210 PCIe phys Varadarajan Narayanan
1 sibling, 1 reply; 4+ messages in thread
From: Varadarajan Narayanan @ 2026-06-16 5:04 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Varadarajan Narayanan
The ipq5210 has one dual lane and one single lane PCIe phy.
The dual lane phy is similar to the dual lane phy present in ipq9574. Hence
qcom,ipq5210-qmp-gen3x2-pcie-phy is documented with ipq9574's dual lane phy
as fallback compatible.
The single lane phy (qcom,ipq5210-qmp-gen3x1-pcie-phy) is documented as
specific compatible as it uses a combination of its own initialization
tables and some of the existing tables.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index f60804687412..fc155ad5fa6d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -17,6 +17,7 @@ properties:
compatible:
oneOf:
- enum:
+ - qcom,ipq5210-qmp-gen3x1-pcie-phy
- qcom,ipq6018-qmp-pcie-phy
- qcom,ipq8074-qmp-gen3-pcie-phy
- qcom,ipq8074-qmp-pcie-phy
@@ -28,6 +29,7 @@ properties:
- const: qcom,ipq9574-qmp-gen3x1-pcie-phy
- items:
- enum:
+ - qcom,ipq5210-qmp-gen3x2-pcie-phy
- qcom,ipq5424-qmp-gen3x2-pcie-phy
- const: qcom,ipq9574-qmp-gen3x2-pcie-phy
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 2/2] phy: qcom-qmp-pcie: Add support for ipq5210 PCIe phys
2026-06-16 5:04 [PATCH v4 0/2] Enable the QMP PCIe PHY present in Qualcomm ipq5210 SoC Varadarajan Narayanan
2026-06-16 5:04 ` [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY Varadarajan Narayanan
@ 2026-06-16 5:04 ` Varadarajan Narayanan
1 sibling, 0 replies; 4+ messages in thread
From: Varadarajan Narayanan @ 2026-06-16 5:04 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Varadarajan Narayanan, Dmitry Baryshkov
Add support for a PCIe phys found on Qualcomm ipq5210 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 129 +++++++++++++++++++++++++++++++
1 file changed, 129 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index d3effad7a074..1762ccadc793 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -620,6 +620,89 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_misc_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
};
+static const struct qmp_phy_init_tbl ipq5210_gen3x1_pcie_ep_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x23),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x23),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xfe),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xfe),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x10),
+};
+
+static const struct qmp_phy_init_tbl ipq5210_gen3x1_pcie_ep_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_ENABLES, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq5210_gen3x1_pcie_ep_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_PRESET_P10_POST, 0x58),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_CONFIG1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_OSC_DTCT_CONFIG4, 0xff),
+};
+
static const struct qmp_phy_init_tbl ipq9574_gen3x1_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
@@ -3746,6 +3829,49 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
.phy_status = PHYSTATUS,
};
+static const struct qmp_phy_cfg ipq5210_gen3x1_pciephy_cfg = {
+ .lanes = 1,
+
+ .offsets = &qmp_pcie_offsets_v4x1,
+
+ .tbls = {
+ .serdes = ipq9574_gen3x1_pcie_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(ipq9574_gen3x1_pcie_serdes_tbl),
+ .tx = ipq8074_pcie_gen3_tx_tbl,
+ .tx_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
+ .rx = ipq9574_pcie_rx_tbl,
+ .rx_num = ARRAY_SIZE(ipq9574_pcie_rx_tbl),
+ .pcs = ipq9574_gen3x1_pcie_pcs_tbl,
+ .pcs_num = ARRAY_SIZE(ipq9574_gen3x1_pcie_pcs_tbl),
+ .pcs_misc = ipq9574_gen3x1_pcie_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(ipq9574_gen3x1_pcie_pcs_misc_tbl),
+ },
+
+ .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+ .serdes = ipq5210_gen3x1_pcie_ep_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(ipq5210_gen3x1_pcie_ep_serdes_tbl),
+ .tx = ipq6018_pcie_tx_tbl,
+ .tx_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx = ipq5210_gen3x1_pcie_ep_rx_tbl,
+ .rx_num = ARRAY_SIZE(ipq5210_gen3x1_pcie_ep_rx_tbl),
+ .pcs = ipq6018_pcie_pcs_tbl,
+ .pcs_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .pcs_misc = ipq5210_gen3x1_pcie_ep_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(ipq5210_gen3x1_pcie_ep_pcs_misc_tbl),
+ },
+
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_v4_regs_layout,
+
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .pipe_clock_rate = 250000000,
+};
+
static const struct qmp_phy_cfg ipq9574_gen3x1_pciephy_cfg = {
.lanes = 1,
@@ -5543,6 +5669,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
}, {
.compatible = "qcom,glymur-qmp-gen5x4-pcie-phy",
.data = &glymur_qmp_gen5x4_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq5210-qmp-gen3x1-pcie-phy",
+ .data = &ipq5210_gen3x1_pciephy_cfg,
}, {
.compatible = "qcom,ipq6018-qmp-pcie-phy",
.data = &ipq6018_pciephy_cfg,
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY
2026-06-16 5:04 ` [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY Varadarajan Narayanan
@ 2026-06-17 7:01 ` Krzysztof Kozlowski
0 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2026-06-17 7:01 UTC (permalink / raw)
To: Varadarajan Narayanan
Cc: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, linux-phy, devicetree, linux-kernel
On Tue, Jun 16, 2026 at 10:34:41AM +0530, Varadarajan Narayanan wrote:
> The ipq5210 has one dual lane and one single lane PCIe phy.
>
> The dual lane phy is similar to the dual lane phy present in ipq9574. Hence
> qcom,ipq5210-qmp-gen3x2-pcie-phy is documented with ipq9574's dual lane phy
> as fallback compatible.
>
> The single lane phy (qcom,ipq5210-qmp-gen3x1-pcie-phy) is documented as
> specific compatible as it uses a combination of its own initialization
> tables and some of the existing tables.
>
> Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-06-17 7:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-06-16 5:04 [PATCH v4 0/2] Enable the QMP PCIe PHY present in Qualcomm ipq5210 SoC Varadarajan Narayanan
2026-06-16 5:04 ` [PATCH v4 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the ipq5210 QMP PCIe PHY Varadarajan Narayanan
2026-06-17 7:01 ` Krzysztof Kozlowski
2026-06-16 5:04 ` [PATCH v4 2/2] phy: qcom-qmp-pcie: Add support for ipq5210 PCIe phys Varadarajan Narayanan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox