[PATCH v9 2/2] scsi: libsas: Add linkrate and sas_addr change detection in rediscover

[Xingui Yang <yangxingui@huawei.com>]

Introduce sas_dev_is_flutter() and sas_rediscover_ex_phy() to improve
flutter and device replace detection during rediscovery.

sas_dev_is_flutter() calls sas_ex_phy_discover() before looking up the
child device, which ensures the PHY state is always updated and avoids
a use-after-free since the child device pointer is obtained after the
sleeping SMP request completes.

It adds validation for linkrate and sas_addr changes. When the SAS
address changes, it restores phy->attached_sas_addr back to the original
address before returning false, ensuring sas_unregister_devs_sas_addr()
can properly match and unregister the old device via
sas_phy_match_dev_addr(). The sas_addr check is ordered before the
linkrate check to ensure the address restoration is not skipped when
both change simultaneously.

sas_rediscover_ex_phy() uses the async discovery pattern
(sas_discover_event) instead of the synchronous sas_discover_new() to
ensure proper ordering between device unregistration and rediscovery,
avoiding sysfs_warn_dup() errors.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Suggested-by: John Garry <john.g.garry@oracle.com>
---
 drivers/scsi/libsas/sas_expander.c | 83 +++++++++++++++++++++++++-----
 1 file changed, 69 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index fc6d8f3c9dca..e27953de2b4e 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1967,6 +1967,72 @@ static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
 	return false;
 }
 
+static void sas_rediscover_ex_phy(struct domain_device *dev, int phy_id,
+				  bool last)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+	phy->phy_change_count = -1;
+	ex->ex_change_count = -1;
+	sas_unregister_devs_sas_addr(dev, phy_id, last);
+	sas_discover_event(dev->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+static bool sas_dev_is_flutter(struct domain_device *dev, int phy_id,
+			       u8 *sas_addr, enum sas_device_type type)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	struct domain_device *child_dev;
+	char *action = "";
+	int res;
+
+	if (SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr) ||
+	    !dev_type_flutter(type, phy->attached_dev_type))
+		return false;
+
+	res = sas_ex_phy_discover(dev, phy_id);
+	if (res)
+		return false;
+
+	child_dev = sas_ex_to_dev(dev, phy_id);
+	if (!child_dev)
+		goto out;
+
+	if (dev_is_sata(child_dev) &&
+	    phy->attached_dev_type == SAS_SATA_PENDING) {
+		action = ", needs recovery";
+		goto out;
+	}
+
+	if (SAS_ADDR(child_dev->sas_addr) != SAS_ADDR(phy->attached_sas_addr)) {
+		pr_info("ex %016llx phy%02d sas_addr changed from %016llx to %016llx\n",
+			SAS_ADDR(dev->sas_addr), phy_id,
+			SAS_ADDR(child_dev->sas_addr),
+			SAS_ADDR(phy->attached_sas_addr));
+		/*
+		 * Device unregistering relies on address matching. Restore
+		 * attached_sas_addr back to the original address so that the old
+		 * device can be unregistered later
+		 */
+		memcpy(phy->attached_sas_addr, child_dev->sas_addr, SAS_ADDR_SIZE);
+		return false;
+	}
+
+	if (child_dev->linkrate != phy->linkrate) {
+		pr_info("ex %016llx phy%02d linkrate changed from %d to %d\n",
+			SAS_ADDR(dev->sas_addr), phy_id,
+			child_dev->linkrate, phy->linkrate);
+		return false;
+	}
+
+out:
+	pr_debug("ex %016llx phy%02d broadcast flutter%s\n",
+		 SAS_ADDR(dev->sas_addr), phy_id, action);
+	return true;
+}
+
 static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
 			      bool last, int sibling)
 {
@@ -2020,27 +2086,16 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
 		if (res == 0)
 			sas_set_ex_phy(dev, phy_id, disc_resp);
 		goto out_free_resp;
-	} else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
-		   dev_type_flutter(type, phy->attached_dev_type)) {
-		struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id);
-		char *action = "";
-
-		sas_ex_phy_discover(dev, phy_id);
+	}
 
-		if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
-			action = ", needs recovery";
-		pr_debug("ex %016llx phy%02d broadcast flutter%s\n",
-			 SAS_ADDR(dev->sas_addr), phy_id, action);
+	if (sas_dev_is_flutter(dev, phy_id, sas_addr, type))
 		goto out_free_resp;
-	}
 
 	/* we always have to delete the old device when we went here */
 	pr_info("ex %016llx phy%02d replace %016llx\n",
 		SAS_ADDR(dev->sas_addr), phy_id,
 		SAS_ADDR(phy->attached_sas_addr));
-	sas_unregister_devs_sas_addr(dev, phy_id, last);
-
-	res = sas_discover_new(dev, phy_id);
+	sas_rediscover_ex_phy(dev, phy_id, last);
 out_free_resp:
 	kfree(disc_resp);
 	return res;
-- 
2.43.0