From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Robert Foss" <rfoss@kernel.org>,
"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
"Jonas Karlman" <jonas@kwiboo.se>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>,
"Andy Yan" <andy.yan@rock-chips.com>,
"Daniel Stone" <daniels@collabora.com>,
"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
"Maíra Canal" <mcanal@igalia.com>,
"Raspberry Pi Kernel Maintenance" <kernel-list@raspberrypi.com>
Cc: kernel@collabora.com, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH v8 31/39] drm/vc4: hdmi: Convert to common SCDC scrambling infrastructure
Date: Thu, 02 Jul 2026 17:46:44 +0300 [thread overview]
Message-ID: <20260702-dw-hdmi-qp-scramb-v8-31-d79890d00b6a@collabora.com> (raw)
In-Reply-To: <20260702-dw-hdmi-qp-scramb-v8-0-d79890d00b6a@collabora.com>
Replace driver local scrambling logic with the newly introduced common
HDMI 2.0 scrambling support:
- Advertise source-side scrambling capability by setting supported HDMI
version based on the variant's max_pixel_clock.
- Provide minimal .scrambler_{enable|disable} connector callbacks that
only toggle the VC5 HDMI_SCRAMBLER_CTL register, while delegating
sink-side SCDC programming and periodic status monitoring to
drm_connector_hdmi_{enable|disable}_scrambling().
- Drop vc4_hdmi_reset_link() and vc4_hdmi_handle_hotplug(), switching
the .detect_ctx() path to drm_atomic_helper_connector_hdmi_hotplug()
which internally calls drm_connector_hdmi_sync_scdc() to trigger a
CRTC reset on reconnection.
- Drop the local scrambling_work delayed workqueue and scdc_enabled
flag, now tracked by the common drm_connector_hdmi layer, as well as
the now unused output_{bpc|color_format} driver data members.
No functional change intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 276 ++++++++---------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 21 ----
2 files changed, 49 insertions(+), 248 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index e7b0f0f2e350..81e0214f7e95 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -35,7 +35,6 @@
#include <drm/display/drm_hdmi_cec_helper.h>
#include <drm/display/drm_hdmi_helper.h>
#include <drm/display/drm_hdmi_state_helper.h>
-#include <drm/display/drm_scdc_helper.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_edid.h>
@@ -114,22 +113,6 @@
#define HSM_MIN_CLOCK_FREQ 120000000
#define CEC_CLOCK_FREQ 40000
-static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)
-{
- struct drm_display_info *display = &vc4_hdmi->connector.display_info;
-
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- if (!display->is_hdmi)
- return false;
-
- if (!display->hdmi.scdc.supported ||
- !display->hdmi.scdc.scrambling.supported)
- return false;
-
- return true;
-}
-
static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
{
struct drm_debugfs_entry *entry = m->private;
@@ -263,124 +246,6 @@ static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi)
static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi) {}
#endif
-static int vc4_hdmi_reset_link(struct drm_connector *connector,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct drm_device *drm;
- struct vc4_hdmi *vc4_hdmi;
- struct drm_connector_state *conn_state;
- struct drm_crtc_state *crtc_state;
- struct drm_crtc *crtc;
- bool scrambling_needed;
- u8 config;
- int ret;
-
- if (!connector)
- return 0;
-
- drm = connector->dev;
- ret = drm_modeset_lock(&drm->mode_config.connection_mutex, ctx);
- if (ret)
- return ret;
-
- conn_state = connector->state;
- crtc = conn_state->crtc;
- if (!crtc)
- return 0;
-
- ret = drm_modeset_lock(&crtc->mutex, ctx);
- if (ret)
- return ret;
-
- crtc_state = crtc->state;
- if (!crtc_state->active)
- return 0;
-
- vc4_hdmi = connector_to_vc4_hdmi(connector);
- mutex_lock(&vc4_hdmi->mutex);
-
- if (!vc4_hdmi_supports_scrambling(vc4_hdmi)) {
- mutex_unlock(&vc4_hdmi->mutex);
- return 0;
- }
-
- scrambling_needed = drm_hdmi_mode_needs_scrambling(&vc4_hdmi->saved_adjusted_mode,
- vc4_hdmi->output_bpc,
- vc4_hdmi->output_format);
- if (!scrambling_needed) {
- mutex_unlock(&vc4_hdmi->mutex);
- return 0;
- }
-
- if (conn_state->commit &&
- !try_wait_for_completion(&conn_state->commit->hw_done)) {
- mutex_unlock(&vc4_hdmi->mutex);
- return 0;
- }
-
- ret = drm_scdc_readb(connector->ddc, SCDC_TMDS_CONFIG, &config);
- if (ret < 0) {
- drm_err(drm, "Failed to read TMDS config: %d\n", ret);
- mutex_unlock(&vc4_hdmi->mutex);
- return 0;
- }
-
- if (!!(config & SCDC_SCRAMBLING_ENABLE) == scrambling_needed) {
- mutex_unlock(&vc4_hdmi->mutex);
- return 0;
- }
-
- mutex_unlock(&vc4_hdmi->mutex);
-
- /*
- * HDMI 2.0 says that one should not send scrambled data
- * prior to configuring the sink scrambling, and that
- * TMDS clock/data transmission should be suspended when
- * changing the TMDS clock rate in the sink. So let's
- * just do a full modeset here, even though some sinks
- * would be perfectly happy if were to just reconfigure
- * the SCDC settings on the fly.
- */
- return drm_atomic_helper_reset_crtc(crtc, ctx);
-}
-
-static void vc4_hdmi_handle_hotplug(struct vc4_hdmi *vc4_hdmi,
- struct drm_modeset_acquire_ctx *ctx,
- enum drm_connector_status status)
-{
- struct drm_connector *connector = &vc4_hdmi->connector;
- int ret;
-
- /*
- * NOTE: This function should really be called with vc4_hdmi->mutex
- * held, but doing so results in reentrancy issues since
- * cec_s_phys_addr() might call .adap_enable, which leads to that
- * funtion being called with our mutex held.
- *
- * A similar situation occurs with vc4_hdmi_reset_link() that
- * will call into our KMS hooks if the scrambling was enabled.
- *
- * Concurrency isn't an issue at the moment since we don't share
- * any state with any of the other frameworks so we can ignore
- * the lock for now.
- */
-
- drm_atomic_helper_connector_hdmi_hotplug(connector, status, NULL);
-
- if (status != connector_status_connected)
- return;
-
- for (;;) {
- ret = vc4_hdmi_reset_link(connector, ctx);
- if (ret == -EDEADLK) {
- drm_modeset_backoff(ctx);
- continue;
- }
-
- break;
- }
-}
-
static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
struct drm_modeset_acquire_ctx *ctx,
bool force)
@@ -392,8 +257,8 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
/*
* NOTE: This function should really take vc4_hdmi->mutex, but
* doing so results in reentrancy issues since
- * vc4_hdmi_handle_hotplug() can call into other functions that
- * would take the mutex while it's held here.
+ * drm_atomic_helper_connector_hdmi_hotplug() can call into other
+ * functions that would take the mutex while it's held here.
*
* Concurrency isn't an issue at the moment since we don't share
* any state with any of the other frameworks so we can ignore
@@ -416,10 +281,11 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
status = connector_status_connected;
}
- vc4_hdmi_handle_hotplug(vc4_hdmi, ctx, status);
+ ret = drm_atomic_helper_connector_hdmi_hotplug(connector, status, ctx);
+
pm_runtime_put(&vc4_hdmi->pdev->dev);
- return status;
+ return ret == -EDEADLK ? ret : status;
}
static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
@@ -526,22 +392,28 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
{
struct drm_connector *connector = &vc4_hdmi->connector;
struct drm_encoder *encoder = &vc4_hdmi->encoder.base;
- unsigned int max_bpc = 8;
+ struct drm_connector_hdmi_caps caps = {
+ .supported_formats = BIT(DRM_OUTPUT_COLOR_FORMAT_RGB444) |
+ BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR422) |
+ BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444),
+ .max_bpc = 8,
+ };
int ret;
if (vc4_hdmi->variant->supports_hdr)
- max_bpc = 12;
+ caps.max_bpc = 12;
- ret = drmm_connector_hdmi_init(dev, connector,
- "Broadcom", "Videocore",
- &vc4_hdmi_connector_funcs,
- &vc4_hdmi_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_HDMIA,
- vc4_hdmi->ddc,
- BIT(DRM_OUTPUT_COLOR_FORMAT_RGB444) |
- BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR422) |
- BIT(DRM_OUTPUT_COLOR_FORMAT_YCBCR444),
- max_bpc);
+ if (vc4_hdmi->variant->max_pixel_clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
+ caps.supported_hdmi_ver = HDMI_VERSION_2_0;
+ else if (vc4_hdmi->variant->max_pixel_clock > HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ)
+ caps.supported_hdmi_ver = HDMI_VERSION_1_3;
+
+ ret = drmm_connector_hdmi_init_with_caps(dev, connector,
+ "Broadcom", "Videocore",
+ &vc4_hdmi_connector_funcs,
+ &vc4_hdmi_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA,
+ vc4_hdmi->ddc, &caps);
if (ret)
return ret;
@@ -553,6 +425,14 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
+ /*
+ * Since we don't know the state of the controller and its
+ * display (if any), let's assume it's always enabled.
+ * drm_connector_hdmi_disable_scrambling() will thus run at boot,
+ * make sure it's disabled, and avoid any inconsistency.
+ */
+ connector->hdmi.scrambler_enabled = connector->hdmi.scrambler_supported;
+
/*
* Some of the properties below require access to state, like bpc.
* Allocate some default initial connector state with our reset helper.
@@ -778,32 +658,14 @@ static int vc4_hdmi_write_spd_infoframe(struct drm_connector *connector,
buffer, len);
}
-#define SCRAMBLING_POLLING_DELAY_MS 1000
-
-static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
+static int vc4_hdmi_scrambler_enable(struct drm_connector *connector)
{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector;
- struct drm_device *drm = connector->dev;
- const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
+ struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
unsigned long flags;
int idx;
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- if (!vc4_hdmi_supports_scrambling(vc4_hdmi))
- return;
-
- if (!drm_hdmi_mode_needs_scrambling(mode,
- vc4_hdmi->output_bpc,
- vc4_hdmi->output_format))
- return;
-
- if (!drm_dev_enter(drm, &idx))
- return;
-
- drm_scdc_set_high_tmds_clock_ratio(connector, true);
- drm_scdc_set_scrambling(connector, true);
+ if (!drm_dev_enter(connector->dev, &idx))
+ return -ENODEV;
spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) |
@@ -812,59 +674,26 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
drm_dev_exit(idx);
- vc4_hdmi->scdc_enabled = true;
-
- queue_delayed_work(system_percpu_wq, &vc4_hdmi->scrambling_work,
- msecs_to_jiffies(SCRAMBLING_POLLING_DELAY_MS));
+ return 0;
}
-static void vc4_hdmi_disable_scrambling(struct drm_encoder *encoder)
+static int vc4_hdmi_scrambler_disable(struct drm_connector *connector)
{
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector;
- struct drm_device *drm = connector->dev;
+ struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
unsigned long flags;
int idx;
- lockdep_assert_held(&vc4_hdmi->mutex);
-
- if (!vc4_hdmi->scdc_enabled)
- return;
-
- vc4_hdmi->scdc_enabled = false;
-
- if (delayed_work_pending(&vc4_hdmi->scrambling_work))
- cancel_delayed_work_sync(&vc4_hdmi->scrambling_work);
-
- if (!drm_dev_enter(drm, &idx))
- return;
+ if (!drm_dev_enter(connector->dev, &idx))
+ return -ENODEV;
spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) &
~VC5_HDMI_SCRAMBLER_CTL_ENABLE);
spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
- drm_scdc_set_scrambling(connector, false);
- drm_scdc_set_high_tmds_clock_ratio(connector, false);
-
drm_dev_exit(idx);
-}
-static void vc4_hdmi_scrambling_wq(struct work_struct *work)
-{
- struct vc4_hdmi *vc4_hdmi = container_of(to_delayed_work(work),
- struct vc4_hdmi,
- scrambling_work);
- struct drm_connector *connector = &vc4_hdmi->connector;
-
- if (drm_scdc_get_scrambling_status(connector))
- return;
-
- drm_scdc_set_high_tmds_clock_ratio(connector, true);
- drm_scdc_set_scrambling(connector, true);
-
- queue_delayed_work(system_percpu_wq, &vc4_hdmi->scrambling_work,
- msecs_to_jiffies(SCRAMBLING_POLLING_DELAY_MS));
+ return 0;
}
static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
@@ -909,7 +738,7 @@ static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
}
- vc4_hdmi_disable_scrambling(encoder);
+ drm_connector_hdmi_disable_scrambling(&vc4_hdmi->connector);
drm_dev_exit(idx);
@@ -1617,6 +1446,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
struct drm_display_info *display = &vc4_hdmi->connector.display_info;
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
+ struct drm_connector_state *conn_state;
unsigned long flags;
int ret;
int idx;
@@ -1685,7 +1515,9 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
}
vc4_hdmi_recenter_fifo(vc4_hdmi);
- vc4_hdmi_enable_scrambling(encoder);
+
+ conn_state = drm_atomic_get_new_connector_state(state, connector);
+ drm_connector_hdmi_enable_scrambling(connector, conn_state);
drm_dev_exit(idx);
@@ -1702,8 +1534,6 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
mutex_lock(&vc4_hdmi->mutex);
drm_mode_copy(&vc4_hdmi->saved_adjusted_mode,
&crtc_state->adjusted_mode);
- vc4_hdmi->output_bpc = conn_state->hdmi.output_bpc;
- vc4_hdmi->output_format = conn_state->hdmi.output_format;
mutex_unlock(&vc4_hdmi->mutex);
}
@@ -1731,7 +1561,9 @@ vc4_hdmi_connector_clock_valid(const struct drm_connector *connector,
}
static const struct drm_connector_hdmi_funcs vc4_hdmi_hdmi_connector_funcs = {
- .tmds_char_rate_valid = vc4_hdmi_connector_clock_valid,
+ .tmds_char_rate_valid = vc4_hdmi_connector_clock_valid,
+ .scrambler_enable = vc4_hdmi_scrambler_enable,
+ .scrambler_disable = vc4_hdmi_scrambler_disable,
.avi = {
.clear_infoframe = vc4_hdmi_clear_avi_infoframe,
.write_infoframe = vc4_hdmi_write_avi_infoframe,
@@ -3225,7 +3057,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
return ret;
spin_lock_init(&vc4_hdmi->hw_lock);
- INIT_DELAYED_WORK(&vc4_hdmi->scrambling_work, vc4_hdmi_scrambling_wq);
dev_set_drvdata(dev, vc4_hdmi);
encoder = &vc4_hdmi->encoder.base;
@@ -3238,15 +3069,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi->pdev = pdev;
vc4_hdmi->variant = variant;
- /*
- * Since we don't know the state of the controller and its
- * display (if any), let's assume it's always enabled.
- * vc4_hdmi_disable_scrambling() will thus run at boot, make
- * sure it's disabled, and avoid any inconsistency.
- */
- if (variant->max_pixel_clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
- vc4_hdmi->scdc_enabled = true;
-
ret = variant->init_resources(drm, vc4_hdmi);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 29d461d4ee49..0e9797ffad30 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -118,8 +118,6 @@ struct vc4_hdmi {
struct vc4_encoder encoder;
struct drm_connector connector;
- struct delayed_work scrambling_work;
-
struct i2c_adapter *ddc;
void __iomem *hdmicore_regs;
void __iomem *hd_regs;
@@ -193,25 +191,6 @@ struct vc4_hdmi {
*/
bool packet_ram_enabled;
- /**
- * @scdc_enabled: Is the HDMI controller currently running with
- * the scrambler on? Protected by @mutex.
- */
- bool scdc_enabled;
-
- /**
- * @output_bpc: Copy of @drm_connector_state.hdmi.output_bpc for
- * use outside of KMS hooks. Protected by @mutex.
- */
- unsigned int output_bpc;
-
- /**
- * @output_format: Copy of
- * @drm_connector_state.hdmi.output_format for use outside of
- * KMS hooks. Protected by @mutex.
- */
- enum drm_output_color_format output_format;
-
/**
* @hdmi_jack: Represents the connection state of the HDMI plug, for
* ALSA jack detection.
--
2.54.0
next prev parent reply other threads:[~2026-07-02 14:46 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 14:46 [PATCH v8 00/39] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 01/39] video/hdmi: Introduce HDMI version enum Cristian Ciocaltea
2026-07-03 13:55 ` Dmitry Baryshkov
2026-07-07 11:54 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 02/39] drm/connector: Add caps-based HDMI connector init helper Cristian Ciocaltea
2026-07-03 14:05 ` Dmitry Baryshkov
2026-07-03 19:31 ` Cristian Ciocaltea
2026-07-07 16:10 ` Maxime Ripard
2026-07-08 10:11 ` Cristian Ciocaltea
2026-07-10 10:27 ` Cristian Ciocaltea
2026-07-15 8:50 ` Maxime Ripard
2026-07-15 10:34 ` Cristian Ciocaltea
2026-07-16 13:44 ` Maxime Ripard
2026-07-16 14:27 ` Cristian Ciocaltea
2026-07-15 8:49 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 03/39] drm/display: bridge_connector: Pass HDMI capabilities through caps struct Cristian Ciocaltea
2026-07-03 14:19 ` Dmitry Baryshkov
2026-07-03 19:55 ` Cristian Ciocaltea
2026-07-08 6:46 ` Maxime Ripard
2026-07-08 10:19 ` Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 04/39] drm/connector: Add HDMI 2.0 scrambler infrastructure Cristian Ciocaltea
2026-07-03 14:34 ` Dmitry Baryshkov
2026-07-03 20:54 ` Cristian Ciocaltea
2026-07-07 12:30 ` Maxime Ripard
2026-07-08 10:34 ` Cristian Ciocaltea
2026-07-09 19:25 ` Cristian Ciocaltea
2026-07-13 8:50 ` Maxime Ripard
2026-07-13 10:23 ` Cristian Ciocaltea
2026-07-15 8:55 ` Maxime Ripard
2026-07-15 10:46 ` Cristian Ciocaltea
2026-07-16 13:50 ` Maxime Ripard
2026-07-16 15:07 ` Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 05/39] drm/display: scdc-helper: Add macro for connector-prefixed debug messages Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 06/39] drm/display: scdc-helper: Add helper to set SCDC version information Cristian Ciocaltea
2026-07-07 15:40 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 07/39] drm/display: hdmi: Add HDMI 2.0 scrambling management helpers Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 08/39] drm/display: hdmi: Advertise SCDC source version when scrambling Cristian Ciocaltea
2026-07-07 15:26 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 09/39] drm/display: hdmi-state-helper: Add fallback TMDS rate validation Cristian Ciocaltea
2026-07-07 11:23 ` Maxime Ripard
2026-07-08 10:39 ` Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 10/39] drm/display: hdmi-state-helper: Sync SCDC state on hotplug Cristian Ciocaltea
2026-07-07 11:31 ` Maxime Ripard
2026-07-08 11:21 ` Cristian Ciocaltea
2026-07-15 8:10 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 11/39] drm/display: hdmi-state-helper: Set HDMI scrambling requirement Cristian Ciocaltea
2026-07-07 11:34 ` Maxime Ripard
2026-07-02 14:46 ` [PATCH v8 12/39] drm/bridge: Remove redundant error check in drm_bridge_helper_reset_crtc() Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 13/39] drm/bridge: Add bridge ops for source-side HDMI 2.0 scrambling Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 14/39] drm/display: bridge_connector: Use cached connector status in .get_modes() Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 15/39] drm/display: bridge_connector: Switch to .detect_ctx() connector helper Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 16/39] drm/display: bridge_connector: Wire up HDMI 2.0 scrambler callbacks Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 17/39] drm/bridge: dw-hdmi-qp: Rate limit i2c read error messages Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 18/39] drm/bridge: dw-hdmi-qp: Provide .{enable|disable}_hpd() PHY ops Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 19/39] drm/bridge: dw-hdmi-qp: Add HDMI 2.0 SCDC scrambling support Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 20/39] drm/bridge: dw-hdmi-qp: Provide dw_hdmi_qp_hpd_notify() helper Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 21/39] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 22/39] drm/rockchip: dw_hdmi_qp: Use local dev variable consistently in bind() Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 23/39] drm/rockchip: dw_hdmi_qp: Drop unnecessary #include Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 24/39] drm/rockchip: dw_hdmi_qp: Defer HPD IRQ enable until after connector setup Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 25/39] drm/rockchip: dw_hdmi_qp: Mask RK3576 HPD IRQ in io_init Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 26/39] drm/rockchip: dw_hdmi_qp: Implement .{enable|disable}_hpd() PHY ops Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 27/39] drm/rockchip: dw_hdmi_qp: Use dw_hdmi_qp_hpd_notify() for HPD reports Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 28/39] drm/bridge: dw-hdmi-qp: Drop unused .setup_hpd() phy op Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 29/39] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 30/39] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-07-07 12:43 ` Maxime Ripard
2026-07-02 14:46 ` Cristian Ciocaltea [this message]
2026-07-07 15:36 ` [PATCH v8 31/39] drm/vc4: hdmi: Convert to common SCDC scrambling infrastructure Maxime Ripard
2026-07-08 12:53 ` Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 32/39] drm/tests: connector: Add HDMI caps-based init coverage Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 33/39] drm/tests: connector: Add HDMI source-side scrambler coverage Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 34/39] drm/tests: hdmi_state_helper: Use drmm_connector_hdmi_init_with_caps() Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 35/39] drm/tests: hdmi_state_helper: Add max_tmds_char_rate fallback tests Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 36/39] drm/tests: edid: Add 4K@60Hz EDID with 600MHz TMDS Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 37/39] drm/tests: hdmi_state_helper: Cover source-side scrambling decision Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 38/39] drm/tests: edid: Fix conformity for 1080p+4K YUV420 200MHz EDID Cristian Ciocaltea
2026-07-02 14:46 ` [PATCH v8 39/39] drm/tests: edid: Fix conformity for 4K RGB/YUV 340MHz EDID Cristian Ciocaltea
2026-07-02 15:31 ` [PATCH v8 00/39] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-07-06 8:33 ` Maud Spierings
2026-07-08 16:07 ` Cristian Ciocaltea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702-dw-hdmi-qp-scramb-v8-31-d79890d00b6a@collabora.com \
--to=cristian.ciocaltea@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.yan@rock-chips.com \
--cc=daniels@collabora.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel-list@raspberrypi.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mcanal@igalia.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox