[PATCH v4 04/11] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

Add pmic,id = m rpmh to regulator definitions. This regulator set provides
vreg_l3m_1p8 the regulator for the ov08x40 RGB sensor on the CRD.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1-crd.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index a9c5c523575ee..7b9a40a7b9a95 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -897,6 +897,36 @@ vreg_l3j_0p8: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-8 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-l4-supply = <&vreg_s4c_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l3m_1p8: ldo3 {
+			regulator-name = "vreg_l3m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1808000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_1p8: ldo4 {
+			regulator-name = "vreg_l4m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1808000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &gpu {

-- 
2.54.0