From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v4 07/11] arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 RGB sensor on CSIPHY4
Date: Wed, 08 Jul 2026 01:44:14 +0100 [thread overview]
Message-ID: <20260708-x1e-camss-csi2-phy-dtsi-v4-7-572348ad1b2a@linaro.org> (raw)
In-Reply-To: <20260708-x1e-camss-csi2-phy-dtsi-v4-0-572348ad1b2a@linaro.org>
Switch on the ov02c10 RGB sensor on CSIPHY4.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 99 ++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index 70e50ccf67677..c5c7bf722a45e 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -866,6 +867,88 @@ vreg_l7m_2p8: ldo7 {
};
+&camss {
+ status = "okay";
+
+ ports {
+ /*
+ * port0 => csiphy0
+ * port1 => csiphy1
+ * port2 => csiphy2
+ * port3 => csiphy4
+ */
+ port@3 {
+ camss_csiphy4_inep: endpoint@0 {
+ data-lanes = <0 1>;
+ remote-endpoint = <&csiphy4_out_ep>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c1 {
+ camera@36 {
+ compatible = "ovti,ov02c10";
+ reg = <0x36>;
+
+ reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_rgb_default>;
+
+ clocks = <&camcc CAM_CC_MCLK4_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ orientation = <0>; /* front facing */
+
+ avdd-supply = <&vreg_l7m_2p8>;
+ dvdd-supply = <&vreg_l2m_1p2>;
+ dovdd-supply = <&vreg_l4m_1p8>;
+
+ port {
+ ov02c10_ep: endpoint {
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <400000000>;
+ remote-endpoint = <&csiphy4_in_ep>;
+ };
+ };
+ };
+};
+
+&csiphy4 {
+ vdda-0p8-supply = <&vreg_l2c_0p8>;
+ vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy4_in_ep: endpoint {
+ data-lanes = <0 1>;
+ clock-lanes = <7>;
+ remote-endpoint = <&ov02c10_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csiphy4_out_ep: endpoint {
+ remote-endpoint = <&camss_csiphy4_inep>;
+ };
+ };
+ };
+};
+
&gpu {
status = "okay";
};
@@ -1447,6 +1530,22 @@ &tlmm {
<72 2>, /* Secure EC I2C connection (?) */
<238 1>; /* UFS Reset */
+ cam_rgb_default: cam-rgb-default-state {
+ mclk-pins {
+ pins = "gpio100";
+ function = "cam_aon";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio237";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
ec_int_n_default: ec-int-n-state {
pins = "gpio66";
function = "gpio";
--
2.54.0
next prev parent reply other threads:[~2026-07-08 0:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 0:44 [PATCH v4 00/11] arm64: dts: qcom: Add x1e/Hamoa camera DTSI Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 01/11] arm64: dts: qcom: x1e80100: Add CAMCC block definition Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 02/11] arm64: dts: qcom: x1e80100: Add CCI definitions Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 03/11] arm64: dts: qcom: x1e80100: Add CAMSS block definition Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 04/11] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators Bryan O'Donoghue
2026-07-17 11:21 ` Konrad Dybcio
2026-07-08 0:44 ` [PATCH v4 05/11] arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4 Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 06/11] arm64: dts: qcom: x1e80100-t14s: Add pm8010 camera PMIC with voltage levels for IR and RGB camera Bryan O'Donoghue
2026-07-08 0:44 ` Bryan O'Donoghue [this message]
2026-07-08 0:44 ` [PATCH v4 08/11] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: " Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 09/11] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add l7b_2p8 voltage regulator for " Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 10/11] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4 Bryan O'Donoghue
2026-07-08 0:44 ` [PATCH v4 11/11] arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260708-x1e-camss-csi2-phy-dtsi-v4-7-572348ad1b2a@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox