* [PATCH v2 0/2] SM8450 QoL changes (qmp)
@ 2026-07-12 3:13 Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 1/2] phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 2/2] phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy Esteban Urrutia via B4 Relay
0 siblings, 2 replies; 3+ messages in thread
From: Esteban Urrutia via B4 Relay @ 2026-07-12 3:13 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Dmitry Baryshkov, Bjorn Andersson
Cc: linux-arm-msm, linux-phy, linux-kernel, phone-devel,
Esteban Urrutia, Dmitry Baryshkov
These two patches drop qmp_v4_calibrate_dp_phy() and modify a pre-emphasis
table for v4 DP PHYs to match downstream behavior.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
---
Changes in v2:
- Split series in subseries (dispcc, dts, qmp, smmu)
- Link to v1: https://patch.msgid.link/20260622-sm8450-qol-v1-0-37e2ee8df9da@proton.me
---
Esteban Urrutia (2):
phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 33 +------------------------------
1 file changed, 1 insertion(+), 32 deletions(-)
---
base-commit: 96615101b3caf73612f80a217abb9a0da0effbc7
change-id: 20260711-sm8450-qol-qmp-53fbec9b92e8
Best regards,
--
Esteban Urrutia <esteuwu@proton.me>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 1/2] phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
2026-07-12 3:13 [PATCH v2 0/2] SM8450 QoL changes (qmp) Esteban Urrutia via B4 Relay
@ 2026-07-12 3:13 ` Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 2/2] phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy Esteban Urrutia via B4 Relay
1 sibling, 0 replies; 3+ messages in thread
From: Esteban Urrutia via B4 Relay @ 2026-07-12 3:13 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Dmitry Baryshkov, Bjorn Andersson
Cc: linux-arm-msm, linux-phy, linux-kernel, phone-devel, Esteban Urrutia
From: Esteban Urrutia <esteuwu@proton.me>
Comparing sm8350 and sm8450 tables, this seems to be a typo.
Fixes: ef14aff107bd ("phy: qcom: com-qmp-combo: add SM8350 & SM8450 support")
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index cdcfad2e86b1..a72c3b9654ec 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2108,7 +2108,7 @@ static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = {
static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = {
{ 0x00, 0x0d, 0x14, 0x1a },
{ 0x00, 0x0e, 0x15, 0xff },
- { 0x00, 0x0d, 0xff, 0xff },
+ { 0x00, 0x0e, 0xff, 0xff },
{ 0x03, 0xff, 0xff, 0xff }
};
--
2.55.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
2026-07-12 3:13 [PATCH v2 0/2] SM8450 QoL changes (qmp) Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 1/2] phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs Esteban Urrutia via B4 Relay
@ 2026-07-12 3:13 ` Esteban Urrutia via B4 Relay
1 sibling, 0 replies; 3+ messages in thread
From: Esteban Urrutia via B4 Relay @ 2026-07-12 3:13 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Dmitry Baryshkov, Bjorn Andersson
Cc: linux-arm-msm, linux-phy, linux-kernel, phone-devel,
Esteban Urrutia, Dmitry Baryshkov
From: Esteban Urrutia <esteuwu@proton.me>
There are no downstream device trees that specify five values in the
qcom,aux-cfg1-settings array.
Plus, after cross referencing both downstream device trees and entries
which refer this function, only 0x13 is specified.
Since 0x13 is written at initialization time, drop this function as a
whole, and remove now unused variable assignations.
Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 31 -------------------------------
1 file changed, 31 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index a72c3b9654ec..5b278fd54a16 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2325,7 +2325,6 @@ static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp);
static void qmp_v4_dp_aux_init(struct qmp_combo *qmp);
static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp);
static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp);
-static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp);
static void qmp_v8_dp_aux_init(struct qmp_combo *qmp);
static int qmp_v8_configure_dp_clocks(struct qmp_combo *qmp);
@@ -2466,7 +2465,6 @@ static const struct qmp_phy_cfg sar2130p_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v6_usb3phy_regs_layout,
.reset_list = msm8996_usb3phy_reset_l,
@@ -2603,7 +2601,6 @@ static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -2650,7 +2647,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -2696,7 +2692,6 @@ static const struct qmp_phy_cfg x1e80100_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -2785,7 +2780,6 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -2834,7 +2828,6 @@ static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
@@ -2882,7 +2875,6 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v6_usb3phy_regs_layout,
.reset_list = msm8996_usb3phy_reset_l,
@@ -2928,7 +2920,6 @@ static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v6_usb3phy_regs_layout,
.reset_list = msm8996_usb3phy_reset_l,
@@ -2974,7 +2965,6 @@ static const struct qmp_phy_cfg sm8750_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v3_configure_dp_clocks,
.configure_dp_phy = qmp_v4_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v8_usb3phy_regs_layout,
.reset_list = msm8996_usb3phy_reset_l,
@@ -3020,7 +3010,6 @@ static const struct qmp_phy_cfg glymur_usb3dpphy_cfg = {
.configure_dp_tx = qmp_v4_configure_dp_tx,
.configure_dp_clocks = qmp_v8_configure_dp_clocks,
.configure_dp_phy = qmp_v8_configure_dp_phy,
- .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v8_n3_usb43dpphy_regs_layout,
.reset_list = msm8996_usb3phy_reset_l,
@@ -3316,7 +3305,6 @@ static void qmp_v4_dp_aux_init(struct qmp_combo *qmp)
writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG7);
writel(0xb7, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG8);
writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG9);
- qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
@@ -3345,7 +3333,6 @@ static void qmp_v8_dp_aux_init(struct qmp_combo *qmp)
writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG7);
writel(0xb7, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG8);
writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG9);
- qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
@@ -3605,24 +3592,6 @@ static int qmp_v8_configure_dp_phy(struct qmp_combo *qmp)
return 0;
}
-/*
- * We need to calibrate the aux setting here as many times
- * as the caller tries
- */
-static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp)
-{
- static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
- u8 val;
-
- qmp->dp_aux_cfg++;
- qmp->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
- val = cfg1_settings[qmp->dp_aux_cfg];
-
- writel(val, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
-
- return 0;
-}
-
static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opts)
{
const struct phy_configure_opts_dp *dp_opts = &opts->dp;
--
2.55.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-07-12 3:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-07-12 3:13 [PATCH v2 0/2] SM8450 QoL changes (qmp) Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 1/2] phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs Esteban Urrutia via B4 Relay
2026-07-12 3:13 ` [PATCH v2 2/2] phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy Esteban Urrutia via B4 Relay
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox