* [PATCH ath-current] wifi: ath12k: fix frequency range for single-pdev devices
@ 2026-07-15 6:52 Shenghan Gao
0 siblings, 0 replies; only message in thread
From: Shenghan Gao @ 2026-07-15 6:52 UTC (permalink / raw)
To: Jeff Johnson
Cc: Aditya Kumar Singh, Vasanthakumar Thiagarajan, linux-wireless,
ath12k, linux-kernel
Commit 0d777aa2ca77 ("wifi: ath12k: fix mac pdev frequency range update")
made ath12k_regd_update() handle each supported band independently.
However, it uses WMI band capability values as indices into
pdev->cap.band[]. Those values are bit flags, while cap.band[] is indexed
by enum nl80211_band. As a result, the 2.4 GHz lookup reads the
5 GHz entry, while the 5 GHz lookup reads the 60 GHz entry.
Also, the 5 GHz range is skipped whenever the radio supports 6 GHz. This
is valid when 5 and 6 GHz belong to separate pdevs, but not for single-pdev
devices such as WCN7850, where the same pdev covers both bands. After a
regulatory update, 5 GHz is therefore omitted from ar->freq_range and later
filtered out of the channel list sent to firmware.
On the tested WCN7850, the 11d regulatory update left the frequency range
at 2402-2482 MHz and sent 13 channels to firmware. A subsequent 5 GHz scan
failed with WMI_SCAN_REASON_INTERNAL_FAILURE. With both ranges combined,
the range is 2402-5835 MHz and 26 channels are sent to firmware.
Index cap.band[] with NL80211_BAND_* and update 5 GHz for single-pdev
devices even when 6 GHz is supported.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: 0d777aa2ca77 ("wifi: ath12k: fix mac pdev frequency range update")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5.6 Sol
Signed-off-by: Shenghan Gao <gsh20040816@gmail.com>
---
Testing notes:
- Runtime testing was performed on WCN7850 under the CN regulatory domain.
- 2.4 and 5 GHz scanning and 5 GHz association were verified.
- 6 GHz operation was not tested because it is unavailable under the CN
regulatory domain.
- QCC2072 was not tested because the hardware was not available.
drivers/net/wireless/ath/ath12k/reg.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index 89abf2e87ad1..c3bb1df2b1e2 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -300,7 +300,7 @@ int ath12k_regd_update(struct ath12k *ar, bool init)
if (supported_bands & WMI_HOST_WLAN_2GHZ_CAP) {
if (ab->hw_params->single_pdev_only) {
- phy_id = ar->pdev->cap.band[WMI_HOST_WLAN_2GHZ_CAP].phy_id;
+ phy_id = ar->pdev->cap.band[NL80211_BAND_2GHZ].phy_id;
reg_cap = &ab->hal_reg_cap[phy_id];
}
@@ -310,9 +310,10 @@ int ath12k_regd_update(struct ath12k *ar, bool init)
ath12k_mac_update_freq_range(ar, freq_low, freq_high);
}
- if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && !ar->supports_6ghz) {
+ if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP &&
+ (!ar->supports_6ghz || ab->hw_params->single_pdev_only)) {
if (ab->hw_params->single_pdev_only) {
- phy_id = ar->pdev->cap.band[WMI_HOST_WLAN_5GHZ_CAP].phy_id;
+ phy_id = ar->pdev->cap.band[NL80211_BAND_5GHZ].phy_id;
reg_cap = &ab->hal_reg_cap[phy_id];
}
base-commit: a1a21995c2e1cc2ca6b2226cfe4f5f018370182a
--
2.55.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-15 6:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-07-15 6:52 [PATCH ath-current] wifi: ath12k: fix frequency range for single-pdev devices Shenghan Gao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox