[PATCH v3 0/2] pinctrl: qcom: Add Eliza LPASS LPI support

[PATCH v3 0/2] pinctrl: qcom: Add Eliza LPASS LPI support

[Ravi Hothi]

Eliza is a Qualcomm SoC that uses the same LPASS LPI pin mux
functions as Milos. The key difference is the slew rate register
layout — on Eliza the slew rate field lives in the same GPIO config
register rather than a separate dedicated register.

This series adds support for the Eliza LPASS LPI pin controller by
extending the existing Milos driver with a new variant data struct
that uses the correct slew offsets and sets LPI_FLAG_SLEW_RATE_SAME_REG.
The pin descriptors and function table are shared with Milos since
they are identical.

Patch 1 updates the binding to document the new compatible and the
single reg entry used by Eliza.
Patch 2 adds the driver support.

Changes in v3:
- Fix enum compatible list to alphabetical order
  (qcom,eliza before qcom,milos)
  (Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>)
- Drop incorrect Reported-by/Closes tags
- Link to v2: https://lore.kernel.org/all/20260713121518.2724474-1-ravi.hothi@oss.qualcomm.com/

Changes in v2:
- Use 'enum' instead of 'oneOf' + 'const' for compatible property
  (Reported-by: Rob Herring (Arm) <robh@kernel.org>,
   kernel test robot <lkp@intel.com>)
- Restore 'items' descriptions for reg property, drop redundant maxItems
  (Reported-by: Sashiko AI review)
- Link to v1: https://lore.kernel.org/all/20260703073029.2588960-1-ravi.hothi@oss.qualcomm.com/

Ravi Hothi (2):
  dt-bindings: pinctrl: qcom,milos-lpass-lpi-pinctrl: Add Eliza pinctrl
  pinctrl: qcom: milos-lpass-lpi: Add Eliza LPASS LPI TLMM

 .../pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml | 18 ++++++++-
 .../pinctrl/qcom/pinctrl-milos-lpass-lpi.c    | 40 +++++++++++++++++++
 2 files changed, 57 insertions(+), 1 deletion(-)


base-commit: cc2b5f627e8ccbae1188ef2d8be3e451d7f933a5
-- 
2.34.1

[PATCH v3 1/2] dt-bindings: pinctrl: qcom,milos-lpass-lpi-pinctrl: Add Eliza pinctrl

[Ravi Hothi]

Document compatible for Qualcomm Eliza SoC LPASS LPI pin controller.
Eliza has the same pin mux functions as Milos but uses a different
slew rate register layout where the slew rate field is in the same
GPIO config register rather than a separate dedicated register. As a
result, Eliza only has a single reg entry instead of two.

Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml  | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml
index 73e84f188591..86c1da0f577c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml
@@ -15,9 +15,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,milos-lpass-lpi-pinctrl
+    enum:
+      - qcom,eliza-lpass-lpi-pinctrl
+      - qcom,milos-lpass-lpi-pinctrl
 
   reg:
+    minItems: 1
     items:
       - description: LPASS LPI TLMM Control and Status registers
       - description: LPASS LPI MCC registers
@@ -74,6 +77,19 @@ $defs:
 allOf:
   - $ref: qcom,lpass-lpi-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          const: qcom,eliza-lpass-lpi-pinctrl
+    then:
+      properties:
+        reg:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+
 required:
   - compatible
   - reg
-- 
2.34.1

[PATCH v3 2/2] pinctrl: qcom: milos-lpass-lpi: Add Eliza LPASS LPI TLMM

[Ravi Hothi]

Eliza SoC has the same LPASS LPI pin mux functions as Milos but the
slew rate control is in the same GPIO config register rather than a
separate register. Add a new variant data struct with updated slew
offsets and LPI_FLAG_SLEW_RATE_SAME_REG flag, reusing the existing
pin descriptors and function table from Milos.

Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 .../pinctrl/qcom/pinctrl-milos-lpass-lpi.c    | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
index 72b8ffd97860..cb4934cd6f75 100644
--- a/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
@@ -148,6 +148,33 @@ static const struct lpi_pingroup milos_groups[] = {
 	LPI_PINGROUP(22, LPI_NO_SLEW, i2s3_data, dmic4_data, ext_mclk1_e, _),
 };
 
+static const struct lpi_pingroup eliza_groups[] = {
+	LPI_PINGROUP(0, 11, swr_tx_clk, i2s0_clk, _, _),
+	LPI_PINGROUP(1, 11, swr_tx_data, i2s0_ws, _, _),
+	LPI_PINGROUP(2, 11, swr_tx_data, i2s0_data, _, _),
+	LPI_PINGROUP(3, 11, swr_rx_clk, i2s0_data, _, _),
+	LPI_PINGROUP(4, 11, swr_rx_data, i2s0_data, _, _),
+	LPI_PINGROUP(5, 11, swr_rx_data, ext_mclk1_c, i2s0_data, _),
+	LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
+	LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, ext_mclk1_b, _),
+	LPI_PINGROUP(10, 11, wsa_swr_clk, i2s2_clk, _, _),
+	LPI_PINGROUP(11, 11, wsa_swr_data, i2s2_ws, _, _),
+	LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, ext_mclk1_a, _),
+	LPI_PINGROUP(14, 11, swr_tx_data, ext_mclk1_d, _, _),
+	/* gpio15 - gpio18 do not really exist */
+	LPI_PINGROUP(15, 11, _, _, _, _),
+	LPI_PINGROUP(16, 11, _, _, _, _),
+	LPI_PINGROUP(17, LPI_NO_SLEW, _, _, _, _),
+	LPI_PINGROUP(18, LPI_NO_SLEW, _, _, _, _),
+	LPI_PINGROUP(19, LPI_NO_SLEW, i2s3_clk, slimbus_clk, qca_swr_clk, _),
+	LPI_PINGROUP(20, LPI_NO_SLEW, i2s3_ws, slimbus_data, qca_swr_data, _),
+	LPI_PINGROUP(21, LPI_NO_SLEW, i2s3_data, dmic4_clk, _, _),
+	LPI_PINGROUP(22, LPI_NO_SLEW, i2s3_data, dmic4_data, ext_mclk1_e, _),
+};
+
 static const struct lpi_function milos_functions[] = {
 	LPI_FUNCTION(gpio),
 	LPI_FUNCTION(dmic1_clk),
@@ -196,8 +223,21 @@ static const struct lpi_pinctrl_variant_data milos_lpi_data = {
 	.nfunctions = ARRAY_SIZE(milos_functions),
 };
 
+static const struct lpi_pinctrl_variant_data eliza_lpi_data = {
+	.pins = milos_lpi_pins,
+	.npins = ARRAY_SIZE(milos_lpi_pins),
+	.groups = eliza_groups,
+	.ngroups = ARRAY_SIZE(eliza_groups),
+	.functions = milos_functions,
+	.nfunctions = ARRAY_SIZE(milos_functions),
+	.flags = LPI_FLAG_SLEW_RATE_SAME_REG,
+};
+
 static const struct of_device_id lpi_pinctrl_of_match[] = {
 	{
+		.compatible = "qcom,eliza-lpass-lpi-pinctrl",
+		.data = &eliza_lpi_data,
+	}, {
 		.compatible = "qcom,milos-lpass-lpi-pinctrl",
 		.data = &milos_lpi_data,
 	},
-- 
2.34.1

Re: [PATCH v3 0/2] pinctrl: qcom: Add Eliza LPASS LPI support

[Bartosz Golaszewski]

On Wed, 15 Jul 2026 18:51:48 +0530, Ravi Hothi wrote:
> Eliza is a Qualcomm SoC that uses the same LPASS LPI pin mux
> functions as Milos. The key difference is the slew rate register
> layout — on Eliza the slew rate field lives in the same GPIO config
> register rather than a separate dedicated register.
> 
> This series adds support for the Eliza LPASS LPI pin controller by
> extending the existing Milos driver with a new variant data struct
> that uses the correct slew offsets and sets LPI_FLAG_SLEW_RATE_SAME_REG.
> The pin descriptors and function table are shared with Milos since
> they are identical.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: pinctrl: qcom,milos-lpass-lpi-pinctrl: Add Eliza pinctrl
      https://git.kernel.org/brgl/c/f81bcaae1edde95c684436310edad8cf849f1f1f
[2/2] pinctrl: qcom: milos-lpass-lpi: Add Eliza LPASS LPI TLMM
      https://git.kernel.org/brgl/c/82c3edf8701154e2768973ebd4c0d2f3bd29621e

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>