[PATCH v8 0/3] iio: adc: ti-ads1100: Add support for TI ADS1110 to ti-ads1100 driver

[PATCH v8 0/3] iio: adc: ti-ads1100: Add support for TI ADS1110 to ti-ads1100 driver

[Jakub Szczudlo]

Add support for the TI ADS1110 to the existing ADS1100 ADC IIO driver.
The ADS1110 is pin-to-pin compatible with the ADS1100 while providing
higher resolution and an internal voltage reference. This patch series
extends driver support for ADS1110, updates device tree bindings and
Kconfig text, and improves the overall hardware description for the
TI ADS1100 family.

Tested on: Raspberry pi 3b+ with 7.0 stable kernel

---
V7 -> V8:
- fix logic error in ads1100_new_data_is_ready, on ads1110 it will wait for new conversion, in
  ads1100 it will just wait for some time because ST/BSY register always reads 1 there
- change ads_config to chip_info
- fail in i2c_get_match_data will return -ENODATA instead of EINVAL
- make returning value in ads1100_poll_data_ready more readable
- move i2c_get_match_data higher in device probe function so all indio_dev will be in the same 
  place
- Link to v7: https://lore.kernel.org/linux-iio/20260714194717.596193-1-jakubszczudlo40@gmail.com/
V6 -> V7:
- checking for negative value returned from get_vref_millivolts and taking value only in probe
  will be added in the next patchset to be easier to review
- change ads1100_new_data_not_ready to ads1100_new_data_is_ready and returning int to be able to 
  return error when i2c read fails
- doesn't add checking for short read as i2c_master_recv can return count of bytes read or negative 
  error code, so checking for short read is not needed
- change from MSPS to SPS in Kconfig help text
- set iio_dev->name after taking device name from device tree in third patch to be more generic 
  and not only for ads1110
- fix typo in ads1100_get_vref_millivolts
- correct typos in commit messages and add ti-ads1100: in subject line
- Link to v6: https://lore.kernel.org/linux-iio/20260711184414.1013686-1-jakubszczudlo40@gmail.com/

V5 -> V6:
- correct for loop so it will be more readible and return error when iterator matches array size
- fix SI unit letter size
- correct using available_data_rate_hz array when using ads1110
- bring cast to char* back
- Link to v5: https://lore.kernel.org/linux-iio/20260628194341.66752-1-jakubszczudlo40@gmail.com/

V4 -> V5:
- Correct pm macros to be more generic
- fix variables ordering in new functions
- delete unnecessary casts
- add unit to variable names
- change array name so it will sound as array not variable
- correct get_vref_milivolts so it will check if not negative value returned
- delete unnecessary short read check in i2c receive
- Link to v4: https://lore.kernel.org/linux-iio/20260622221550.374235-1-jakubszczudlo40@gmail.com/

V3 -> V4:
- make fixes patch the first change in the series
- correct error handling when short read
- use ACQUIRE macros from pm_runtime.h in new functions
- Link to v3: https://lore.kernel.org/linux-iio/20260613190957.654798-1-jakubszczudlo40@gmail.com/

V2 -> V3:
- clean patch from unreleated changes
- divide adding support for ads1110 into separate patch
- add missing changelog
- Link to v2: https://lore.kernel.org/linux-iio/20260607183542.368184-1-jakubszczudlo40@gmail.com/

V1 -> V2:
- go from creating new driver to extending ADS1100 driver to support ADS1110
- Link to v1: https://lore.kernel.org/linux-iio/20260527164312.355729-1-jakubszczudlo40@gmail.com/

Jakub Szczudlo (3):
  iio: adc: ti-ads1100: Fix incorrect reading when datarate changed in
    single mode
  dt-bindings: iio: adc: ti,ads1100: add support for ADS1110
  iio: adc: ti-ads1100: Add ti-ads1110 support to  ti-ads1100 driver

 .../bindings/iio/adc/ti,ads1100.yaml          |  10 +-
 drivers/iio/adc/Kconfig                       |   9 +-
 drivers/iio/adc/ti-ads1100.c                  | 154 +++++++++++++++---
 3 files changed, 143 insertions(+), 30 deletions(-)

-- 
2.47.3

[PATCH v8 1/3] iio: adc: ti-ads1100: Fix incorrect reading when datarate changed in single mode

[Jakub Szczudlo]

When device is suspended and it is in single mode then changing
datarate doesn't make it actually wait for new measurement, so to
be sure that read after change is correct functions that changes
datarate and gain will wait for a new data.

Fixes: 541880542f2b ("iio: adc: Add TI ADS1100 and ADS1000")
Signed-off-by: Jakub Szczudlo <jakubszczudlo40@gmail.com>
---
 drivers/iio/adc/ti-ads1100.c | 71 ++++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
index 9fe8d54cce83..363f790ca5d5 100644
--- a/drivers/iio/adc/ti-ads1100.c
+++ b/drivers/iio/adc/ti-ads1100.c
@@ -15,10 +15,12 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/iopoll.h>
 #include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/time.h>
 #include <linux/units.h>
 
 #include <linux/iio/iio.h>
@@ -43,6 +45,9 @@
 static const int ads1100_data_rate[] = { 128, 32, 16, 8 };
 static const int ads1100_data_rate_bits[] = { 12, 14, 15, 16 };
 
+/* Timeout based on the minimum sample rate of 8 SPS (7500ms) */
+#define ADS1100_MAX_DRDY_TIMEOUT_US	(7500 * USEC_PER_MSEC)
+
 struct ads1100_data {
 	struct i2c_client *client;
 	struct regulator *reg_vdd;
@@ -123,10 +128,50 @@ static int ads1100_get_adc_result(struct ads1100_data *data, int chan, int *val)
 	return 0;
 }
 
+static int ads1100_new_data_is_ready(struct ads1100_data *data)
+{
+	u8 buffer[3];
+	int ret;
+
+	ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer));
+	if (ret < 0) {
+		dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
+		return ret;
+	}
+
+	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]) ? 0 : 1;
+}
+
+static int ads1100_poll_data_ready(struct ads1100_data *data)
+{
+	int data_rate_Hz = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK, data->config)];
+	/* To be sure we wait 5 times more than data rate */
+	unsigned long wait_time_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * data_rate_Hz);
+	int data_ready;
+	u8 buffer[3];
+	int ret;
+
+	/* To be sure that polled value will have value after config change */
+	ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer));
+	if (ret < 0) {
+		dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
+		return ret;
+	}
+
+	ret = readx_poll_timeout(ads1100_new_data_is_ready, data,
+				 data_ready, data_ready != 0,
+				 wait_time_us, ADS1100_MAX_DRDY_TIMEOUT_US);
+	if (data_ready < 0)
+		return data_ready;
+
+	return 0;
+}
+
 static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
 {
 	int microvolts;
 	int gain;
+	int ret;
 
 	/* With Vdd between 2.7 and 5V, the scale is always below 1 */
 	if (val)
@@ -135,6 +180,11 @@ static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
 	if (!val2)
 		return -EINVAL;
 
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(&data->client->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
 	microvolts = regulator_get_voltage(data->reg_vdd);
 	/*
 	 * val2 is in 'micro' units, n = val2 / 1000000
@@ -149,22 +199,35 @@ static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
 
 	ads1100_set_config_bits(data, ADS1100_PGA_MASK, ffs(gain) - 1);
 
-	return 0;
+	return ads1100_poll_data_ready(data);
 }
 
 static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
 {
 	unsigned int i;
 	unsigned int size;
+	int ret;
 
 	size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1;
 	for (i = 0; i < size; i++) {
 		if (ads1100_data_rate[i] == rate)
-			return ads1100_set_config_bits(data, ADS1100_DR_MASK,
-						       FIELD_PREP(ADS1100_DR_MASK, i));
+			break;
 	}
 
-	return -EINVAL;
+	if (i == size)
+		return -EINVAL;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(&data->client->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	ret = ads1100_set_config_bits(data, ADS1100_DR_MASK,
+				      FIELD_PREP(ADS1100_DR_MASK, i));
+	if (ret)
+		return ret;
+
+	return ads1100_poll_data_ready(data);
 }
 
 static int ads1100_get_vdd_millivolts(struct ads1100_data *data)
-- 
2.47.3

[PATCH v8 2/3] dt-bindings: iio: adc: ti,ads1100: add support for ADS1110

[Jakub Szczudlo]

Register layouts are the same as for ADS1100 but ADS1110 have different
data rates and have internal voltage reference that is always 2.048V.
Also correct order of ads so they will be sorted alphabetically.

Signed-off-by: Jakub Szczudlo <jakubszczudlo40@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/iio/adc/ti,ads1100.yaml        | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
index 970ccab15e1e..28c5e2dd0ad6 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
@@ -4,19 +4,23 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI ADS1100/ADS1000 single channel I2C analog to digital converter
+title: TI ADS1100 and similar single channel I2C Analog to Digital Converters
 
 maintainers:
   - Mike Looijmans <mike.looijmans@topic.nl>
 
 description: |
-  Datasheet at: https://www.ti.com/lit/gpn/ads1100
+  Datasheets:
+    - https://www.ti.com/lit/gpn/ads1000
+    - https://www.ti.com/lit/gpn/ads1100
+    - https://www.ti.com/lit/gpn/ads1110
 
 properties:
   compatible:
     enum:
-      - ti,ads1100
       - ti,ads1000
+      - ti,ads1100
+      - ti,ads1110
 
   reg:
     maxItems: 1
-- 
2.47.3

[PATCH v8 3/3] iio: adc: ti-ads1100: Add ti-ads1110 support to ti-ads1100 driver

[Jakub Szczudlo]

Add ADS1110 support that have faster datarate than ADS1100, it also uses
internal voltage reference of 2.048V for measurement.

Signed-off-by: Jakub Szczudlo <jakubszczudlo40@gmail.com>
---
 drivers/iio/adc/Kconfig      |  9 ++--
 drivers/iio/adc/ti-ads1100.c | 93 ++++++++++++++++++++++++++----------
 2 files changed, 74 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 3755a81c1efd..49a9ac3bf43d 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1768,11 +1768,14 @@ config TI_ADS1018
          called ti-ads1018.
 
 config TI_ADS1100
-	tristate "Texas Instruments ADS1100 and ADS1000 ADC"
+	tristate "Texas Instruments ADS1100 and similar single channel I2C ADC"
 	depends on I2C
 	help
-	  If you say yes here you get support for Texas Instruments ADS1100 and
-	  ADS1000 ADC chips.
+	  If you say yes here you get support for TI single channel I2C Analog
+	  Devices.
+	  * ADS1000 12-Bit, 128 SPS Analog-to-Digital Converter
+	  * ADS1100 16-Bit, 128 SPS Analog-to-Digital Converter
+	  * ADS1110 16-Bit, 240 SPS Analog-to-Digital Converter
 
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-ads1100.
diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
index 363f790ca5d5..19533667e6cd 100644
--- a/drivers/iio/adc/ti-ads1100.c
+++ b/drivers/iio/adc/ti-ads1100.c
@@ -5,7 +5,7 @@
  * Copyright (c) 2023, Topic Embedded Products
  *
  * Datasheet: https://www.ti.com/lit/gpn/ads1100
- * IIO driver for ADS1100 and ADS1000 ADC 16-bit I2C
+ * IIO driver for ADS1100 and similar single channel ADC 16-bit I2C
  */
 
 #include <linux/bitfield.h>
@@ -41,20 +41,44 @@
 #define	ADS1100_SINGLESHOT	ADS1100_CFG_SC
 
 #define ADS1100_SLEEP_DELAY_MS	2000
+#define ADS1110_INTERNAL_REF_mV 2048
 
 static const int ads1100_data_rate[] = { 128, 32, 16, 8 };
+static const int ads1110_data_rate[] = { 240, 60, 30, 15 };
 static const int ads1100_data_rate_bits[] = { 12, 14, 15, 16 };
 
 /* Timeout based on the minimum sample rate of 8 SPS (7500ms) */
 #define ADS1100_MAX_DRDY_TIMEOUT_US	(7500 * USEC_PER_MSEC)
 
+struct ads1100_config {
+	const char *name;
+	const int *available_data_rate_hz;
+	const int data_rate_count;
+	bool has_internal_vref_only;
+};
+
+static const struct ads1100_config ads1100_config = {
+	.name = "ads1100",
+	.available_data_rate_hz = ads1100_data_rate,
+	.data_rate_count = ARRAY_SIZE(ads1100_data_rate),
+	.has_internal_vref_only = false,
+};
+
+static const struct ads1100_config ads1110_config = {
+	.name = "ads1110",
+	.available_data_rate_hz = ads1110_data_rate,
+	.data_rate_count = ARRAY_SIZE(ads1110_data_rate),
+	.has_internal_vref_only = true,
+};
+
 struct ads1100_data {
 	struct i2c_client *client;
 	struct regulator *reg_vdd;
 	struct mutex lock;
 	int scale_avail[2 * 4]; /* 4 gain settings */
+	const struct ads1100_config *chip_info;
 	u8 config;
-	bool supports_data_rate; /* Only the ADS1100 can select the rate */
+	bool supports_data_rate;
 };
 
 static const struct iio_chan_spec ads1100_channel = {
@@ -90,6 +114,20 @@ static int ads1100_set_config_bits(struct ads1100_data *data, u8 mask, u8 value)
 	return 0;
 };
 
+static int ads1100_get_vref_millivolts(struct ads1100_data *data)
+{
+	int voltage_uV;
+
+	if (data->chip_info->has_internal_vref_only)
+		return ADS1110_INTERNAL_REF_mV;
+
+	voltage_uV = regulator_get_voltage(data->reg_vdd);
+	if (voltage_uV < 0)
+		return voltage_uV;
+
+	return voltage_uV / (MICRO / MILLI);
+}
+
 static int ads1100_data_bits(struct ads1100_data *data)
 {
 	return ads1100_data_rate_bits[FIELD_GET(ADS1100_DR_MASK, data->config)];
@@ -139,14 +177,16 @@ static int ads1100_new_data_is_ready(struct ads1100_data *data)
 		return ret;
 	}
 
-	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]) ? 0 : 1;
+	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]);
 }
 
 static int ads1100_poll_data_ready(struct ads1100_data *data)
 {
-	int data_rate_Hz = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK, data->config)];
+	int data_rate_index = FIELD_GET(ADS1100_DR_MASK, data->config);
+	int data_rate_Hz = data->chip_info->available_data_rate_hz[data_rate_index];
 	/* To be sure we wait 5 times more than data rate */
-	unsigned long wait_time_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * data_rate_Hz);
+	unsigned long period_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, data_rate_Hz);
+	unsigned long wait_time_us = 5UL * period_us;
 	int data_ready;
 	u8 buffer[3];
 	int ret;
@@ -159,7 +199,7 @@ static int ads1100_poll_data_ready(struct ads1100_data *data)
 	}
 
 	ret = readx_poll_timeout(ads1100_new_data_is_ready, data,
-				 data_ready, data_ready != 0,
+				 data_ready, data_ready == 0,
 				 wait_time_us, ADS1100_MAX_DRDY_TIMEOUT_US);
 	if (data_ready < 0)
 		return data_ready;
@@ -185,7 +225,7 @@ static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
 	if (ret)
 		return ret;
 
-	microvolts = regulator_get_voltage(data->reg_vdd);
+	microvolts = ads1100_get_vref_millivolts(data) * (MICRO / MILLI);
 	/*
 	 * val2 is in 'micro' units, n = val2 / 1000000
 	 * result must be millivolts, d = microvolts / 1000
@@ -208,9 +248,9 @@ static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
 	unsigned int size;
 	int ret;
 
-	size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1;
+	size = data->supports_data_rate ? data->chip_info->data_rate_count : 1;
 	for (i = 0; i < size; i++) {
-		if (ads1100_data_rate[i] == rate)
+		if (data->chip_info->available_data_rate_hz[i] == rate)
 			break;
 	}
 
@@ -230,14 +270,9 @@ static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
 	return ads1100_poll_data_ready(data);
 }
 
-static int ads1100_get_vdd_millivolts(struct ads1100_data *data)
-{
-	return regulator_get_voltage(data->reg_vdd) / (MICRO / MILLI);
-}
-
 static void ads1100_calc_scale_avail(struct ads1100_data *data)
 {
-	int millivolts = ads1100_get_vdd_millivolts(data);
+	int millivolts = ads1100_get_vref_millivolts(data);
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(data->scale_avail) / 2; i++) {
@@ -259,9 +294,9 @@ static int ads1100_read_avail(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*type = IIO_VAL_INT;
-		*vals = ads1100_data_rate;
+		*vals = data->chip_info->available_data_rate_hz;
 		if (data->supports_data_rate)
-			*length = ARRAY_SIZE(ads1100_data_rate);
+			*length = data->chip_info->data_rate_count;
 		else
 			*length = 1;
 		return IIO_AVAIL_LIST;
@@ -281,6 +316,7 @@ static int ads1100_read_raw(struct iio_dev *indio_dev,
 {
 	int ret;
 	struct ads1100_data *data = iio_priv(indio_dev);
+	int data_rate_index;
 
 	guard(mutex)(&data->lock);
 	switch (mask) {
@@ -296,12 +332,12 @@ static int ads1100_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		/* full-scale is the supply voltage in millivolts */
-		*val = ads1100_get_vdd_millivolts(data);
+		*val = ads1100_get_vref_millivolts(data);
 		*val2 = 15 + FIELD_GET(ADS1100_PGA_MASK, data->config);
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK,
-						   data->config)];
+		data_rate_index = FIELD_GET(ADS1100_DR_MASK, data->config);
+		*val = data->chip_info->available_data_rate_hz[data_rate_index];
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
@@ -381,7 +417,12 @@ static int ads1100_probe(struct i2c_client *client)
 	data->client = client;
 	mutex_init(&data->lock);
 
-	indio_dev->name = "ads1100";
+	data->chip_info = i2c_get_match_data(client);
+	if (!data->chip_info)
+		return dev_err_probe(dev, -ENODATA,
+				     "Can't get device data from firmware\n");
+
+	indio_dev->name = data->chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &ads1100_channel;
 	indio_dev->num_channels = 1;
@@ -463,16 +504,18 @@ static DEFINE_RUNTIME_DEV_PM_OPS(ads1100_pm_ops,
 				 NULL);
 
 static const struct i2c_device_id ads1100_id[] = {
-	{ .name = "ads1100" },
-	{ .name = "ads1000" },
+	{ .name = "ads1000", .driver_data = (kernel_ulong_t)&ads1100_config },
+	{ .name = "ads1100", .driver_data = (kernel_ulong_t)&ads1100_config },
+	{ .name = "ads1110", .driver_data = (kernel_ulong_t)&ads1110_config },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(i2c, ads1100_id);
 
 static const struct of_device_id ads1100_of_match[] = {
-	{.compatible = "ti,ads1100" },
-	{.compatible = "ti,ads1000" },
+	{ .compatible = "ti,ads1000", .data = &ads1100_config },
+	{ .compatible = "ti,ads1100", .data = &ads1100_config },
+	{ .compatible = "ti,ads1110", .data = &ads1110_config },
 	{ }
 };
 
-- 
2.47.3

Re: [PATCH v8 1/3] iio: adc: ti-ads1100: Fix incorrect reading when datarate changed in single mode

[Jonathan Cameron]

On Fri, 17 Jul 2026 20:50:31 +0200
Jakub Szczudlo <jakubszczudlo40@gmail.com> wrote:

> When device is suspended and it is in single mode then changing
> datarate doesn't make it actually wait for new measurement, so to
> be sure that read after change is correct functions that changes

be sure that read after change is correct, functions that change

(to make it easier to read)

> datarate and gain will wait for a new data.
> 
> Fixes: 541880542f2b ("iio: adc: Add TI ADS1100 and ADS1000")
> Signed-off-by: Jakub Szczudlo <jakubszczudlo40@gmail.com>
> ---
>  drivers/iio/adc/ti-ads1100.c | 71 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 67 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
> index 9fe8d54cce83..363f790ca5d5 100644
> --- a/drivers/iio/adc/ti-ads1100.c
> +++ b/drivers/iio/adc/ti-ads1100.c
> @@ -15,10 +15,12 @@
>  #include <linux/module.h>
>  #include <linux/init.h>
>  #include <linux/i2c.h>
> +#include <linux/iopoll.h>
>  #include <linux/mutex.h>
>  #include <linux/property.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/time.h>
>  #include <linux/units.h>
>  
>  #include <linux/iio/iio.h>
> @@ -43,6 +45,9 @@
>  static const int ads1100_data_rate[] = { 128, 32, 16, 8 };
>  static const int ads1100_data_rate_bits[] = { 12, 14, 15, 16 };
>  
> +/* Timeout based on the minimum sample rate of 8 SPS (7500ms) */
> +#define ADS1100_MAX_DRDY_TIMEOUT_US	(7500 * USEC_PER_MSEC)
> +
>  struct ads1100_data {
>  	struct i2c_client *client;
>  	struct regulator *reg_vdd;
> @@ -123,10 +128,50 @@ static int ads1100_get_adc_result(struct ads1100_data *data, int chan, int *val)
>  	return 0;
>  }
>  
> +static int ads1100_new_data_is_ready(struct ads1100_data *data)
> +{
> +	u8 buffer[3];
> +	int ret;
> +
> +	ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer));
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]) ? 0 : 1;

There is question from sashiko on this one.  I'm kind of assuming it is wrong
but do check (link below)

> +}
> +
> +static int ads1100_poll_data_ready(struct ads1100_data *data)
> +{
> +	int data_rate_Hz = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK, data->config)];
> +	/* To be sure we wait 5 times more than data rate */
> +	unsigned long wait_time_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * data_rate_Hz);
> +	int data_ready;
> +	u8 buffer[3];
> +	int ret;
> +
> +	/* To be sure that polled value will have value after config change */
> +	ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer));
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = readx_poll_timeout(ads1100_new_data_is_ready, data,
> +				 data_ready, data_ready != 0,
> +				 wait_time_us, ADS1100_MAX_DRDY_TIMEOUT_US);
> +	if (data_ready < 0)
> +		return data_ready;

https://sashiko.dev/#/patchset/20260717185033.246580-1-jakubszczudlo40%40gmail.com

ret needs checking.

> +
> +	return 0;
> +}

Otherwise this looks fine to me.

Jonathan

Re: [PATCH v8 3/3] iio: adc: ti-ads1100: Add ti-ads1110 support to ti-ads1100 driver

[Jonathan Cameron]

On Fri, 17 Jul 2026 20:50:33 +0200
Jakub Szczudlo <jakubszczudlo40@gmail.com> wrote:

> Add ADS1110 support that have faster datarate than ADS1100, it also uses
> internal voltage reference of 2.048V for measurement.
> 
> Signed-off-by: Jakub Szczudlo <jakubszczudlo40@gmail.com>
Hi Jakub,

Seems some stuff in here should be in patch 1.

Thanks

Jonathan


> diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
> index 363f790ca5d5..19533667e6cd 100644
> --- a/drivers/iio/adc/ti-ads1100.c
> +++ b/drivers/iio/adc/ti-ads1100.c

...


> @@ -139,14 +177,16 @@ static int ads1100_new_data_is_ready(struct ads1100_data *data)
>  		return ret;
>  	}
>  
> -	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]) ? 0 : 1;
> +	return FIELD_GET(ADS1100_CFG_ST_BSY, buffer[2]);

This change and the use below seem odd to be in this patch. I guess
they should be back in patch 1.

>  }
>  
>  static int ads1100_poll_data_ready(struct ads1100_data *data)
>  {
> -	int data_rate_Hz = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK, data->config)];
> +	int data_rate_index = FIELD_GET(ADS1100_DR_MASK, data->config);
> +	int data_rate_Hz = data->chip_info->available_data_rate_hz[data_rate_index];
>  	/* To be sure we wait 5 times more than data rate */
> -	unsigned long wait_time_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * data_rate_Hz);
> +	unsigned long period_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, data_rate_Hz);
> +	unsigned long wait_time_us = 5UL * period_us;
>  	int data_ready;
>  	u8 buffer[3];
>  	int ret;
> @@ -159,7 +199,7 @@ static int ads1100_poll_data_ready(struct ads1100_data *data)
>  	}
>  
>  	ret = readx_poll_timeout(ads1100_new_data_is_ready, data,
> -				 data_ready, data_ready != 0,
> +				 data_ready, data_ready == 0,
see above. Seems to be in wrong patch.
>  				 wait_time_us, ADS1100_MAX_DRDY_TIMEOUT_US);

Sashiko points out that the polling period is very long.  Was this meant to be period_us?

>  	if (data_ready < 0)
>  		return data_ready;